At what height to hang the electric towel rail

Location Options

When residents of apartments make repairs, there is often a question: where to hang a towel dryer in the bathroom. Definitely can not answer it, everyone chooses a comfortable position.

height, hang, electric, towel

If you cut the water version of the device into the heating or water system, you need to focus on pipes. Usually they are located opposite each other. Most often there is a bathtub and a sink next to the water pipes. Over them to hang a towel dryer is not very convenient, but some do so.

If you have to connect the water dryer to the heating pipes, it is usually done in front of the bathtub. The most convenient location of towels is above the washing machine. That’s how it is located in most modern apartments.

One of the most unfortunate location options will be the installation of the device over the toilet in the combined bathroom. The disadvantage is obvious: a careless movement can slip towels into the toilet bowl.

Another unfortunate place would be the space above the bathroom. The splashing water will fly on the towels, and the construction will not be able to fully perform its functions.

When choosing a scheme of installation of a water towel dryer, in addition to convenience, it is necessary to take into account the pressure of water in the system. If you take it far from the riser, the pressure may not be enough, then the design will not heat.

Basic types of dryers

Different types of coils differ in shape and material of which they are made. Products made of stainless steel have a long service life. Their surface is not covered with additional coating, and simply polished to a shine due to what creates an attractive look.

As for the brass and chrome-plated products, the service life ranges from 5 to 10 years, after which they need to be replaced.

We advise to choose models of towel dryers which have no bridges and connecting seams.

Important when buying a favorite product is the diameter of the pipe and the shape of the structure of the dryer. Among the most common shapes are:

Depends on the shape and design features depends on the height of the installation, which is prescribed in the standard for domestic consumers.

Additional installation options

Even with all the desire, it is not always possible to take into account the norms and requirements of SNIP in the design projects. It may also be due to the presence of a multi-level floor in a small room. We advise to be guided by simple rules:

  • Placement of the dryer in the bathroom is from 95 to 170 cm. You need to pick up such a distance to the floor that an adult can comfortably use the device.
  • When installing the coil- ladder, the person must reach up to its upper rung.
  • M-shaped coils are mounted at least 90 cm, U-shaped. at least 110 cm.

These simple rules will help you perform the installation with your own hands in the shortest possible time.

At what distance do you hang the towel radiator

The importance of the water towel rail in the bathroom should not be underestimated. it performs not only the task of drying clothes, but also reduces humidity in the room. This reduces condensation and the risk of pathogenic mold and mildew on the walls, floor and ceiling.

When choosing a towel radiator, we take into account its design and shape. But do not forget that the location should be thought out in advance. The optimal height for the installation of a towel rail is 120 cm. But at the same time you should remember about a number of additional conditions!

Properly selected height by the builder at the stage of installation of the plumbing will allow the owners of the apartment to enjoy the convenience and comfort of the equipment. What problems can occur due to ignoring the recommendations. read on!

The optimum height for comfortable use of the device

According to the snipu correctly mount the towel rail at a height of 1.2 m from the floor plane. Also experts recommend installing the radiator above the washing machine. It will prevent its corrosion in conditions of high humidity.

The most widespread height of towel rail fastenings is 0,95-1,7 m. And again the question arises, at what height to hang the towel dryer. The answer is simple: at a height that will ensure the comfortable use of the product by all members of your family.

The distance from the radiator to any plumbing fixture should be not less than 0,6 m. In some situations (multi-level floors, non-standard or small bathroom) it is impossible to meet all the requirements of regulations and snip. Then the minimum height from the floor for M-shaped products is 0.9 m, for U-shaped products. 1.1 m.

Now you know exactly at what height to hang the towel radiator. Armed with standard plumbing tools, you can easily perform the installation of the above device with your own hands. If you doubt your abilities, then ask for help from a specialized team of plumbers.

What affects the choice of dryer size

It is necessary to measure before purchasing:

Remember that the width of your chosen radiator must be less than the width of the “mounting spot” on the wall: about 10-15 cm. The allowance is necessary so that in the case of wrong spacing of connections (about this below) you can use spacer pieces. eccentrics for connection of the dryer.

How To Install A Hot Wire Heated Towel Rail

The size of the radiator determines not only the number of things that can be dried on it at the same time, but also its power. the amount of heat it gives to the bathroom. It is believed that for a bathroom up to 6 sq. meters enough dryer with an aspect ratio of 40 to 50 cm. Bathroom in 8 “squares” will require for heating a dryer with a width and length of 60 cm each.

Order of installation of the towel dryer

The correct installation of a towel dryer is possible only in view of observance of requirements of installation. All tolerances and dimensions take into account real emergencies and are aimed at eliminating possible causes of accidents.

  • The distance from the wall to the center of the pipe section should be 35 to 55 millimeters, depending on the size.
  • The standard diameter of seamless pipes is 32 or 25 millimeters.
  • To install the structure there are brackets on which the product is mounted. Connection to the main pipe is carried out by threaded sockets. Internal threads correspond to 1 and ¾. depending on the diameter. On the pipe corresponding thread pitch, only external.
  • Diameter of the main pipeline should not be larger than the cross-section of the towel radiator. This requirement prevents resistance and increase in pressure in places of constriction, according to the rules of installation of the towel radiator.

The direction of flow of the heating medium from top to bottom. On the connection diagrams of the towel dryer in detail marked the necessary standards and tolerances. Pay attention that the installation of the equipment in case of connection to the heating system is made with a jumper that allows you to turn off the heater. This connection is called a closed. There is an open connection to the hot water supply. In this case the crosspiece is not installed.

Diagrams for connection of the U-type or M-type towel dryers are the same. The order of its installation is the same. After installation, according to the rules, the installation of towel dryers, hydraulic tests carried out with a pressure of 1 MPa for two minutes. After that the water fittings are installed.

Types of towel dryers

The construction market offers a wide range of this product. Everyone can choose the desired shape (coil, ladder version) and the material of which towel dryer is made: stainless steel or brass.

It is also desirable to choose a construction with a minimum of seams, crosspieces or without them and avoid possible leaks in the future.

When choosing a pipe take into account the area of the room (5.5-6.5 square meters. m) and the interior of the bathroom.

  • lateral, which does not entail “smashing” the walls. Height from floor to element should be 100-160 cm;
  • Cross and floor. Such a pipe is designed for towel warmers in the form of a “ladder”, because even with a bad head, circulation and heating of its elements will be provided.

In apartment buildings, the connection depends on the pipes of the central water supply. In a private home install additional piping. The main thing is that the height from the last step of the appliance to the floor was 90 cm.

  • Electric. it is connected to the water supply pipes. When installing comply with the norms. The location of the element is determined by the wiring of outlets. This kind will require the installation of a separate automatic relay to prevent a possible short circuit or fire.

The design is installed at a distance of 70 cm from the pipes and plumbing. At planning the height of a towel dryer from the floor take into account the location of elements (they should not overlap the electric network).

Before installing them, consider the distance of the device from the floor, depending on access to the water supply and electrical network. Such models are installed at a distance of 100 cm from the floor. Thanks to this, the device is convenient to use, and there is unimpeded access to the mains.

Installation instructions

Installation of the coil involves cutting into the supply pipe in the hot water system or heating.

Tools that will be needed for the work:

  • minus screwdrivers;
  • pliers;
  • fixing bracket;
  • Pipe cutter and polypropylene pipes;
  • fittings;
  • ball valves.

The most rational way is to cut into the hot water system, since hot water is present in our homes and apartments all year round. Installation can be divided into several mandatory steps:

Pay attention to the last point: its implementation makes it possible to adjust the work of the towel radiator, no matter at what distance from the floor or above the washing machine it will be fixed.

Before beginning installation work, you must write an application to the housing and utilities committee (HUEC) to agree on the date and time of the shut-off of water in the riser.

Depending on the chosen installation option, connecting pipes made of different materials can be used:

  • Copper. quite expensive and complex option, requiring the use of special equipment for soldering.
  • Polypropylene. the most popular and affordable option due to its cost. Has a high resistance and durability.
  • Metal-plastic. budget variant. The method of pressing is used for fixing, so the material may be unstable to pressure differences in the heating system.

with clear video instructions:

| Denial of responsibility | Contacts |RSS