Washing off mold
Mold in the fridge is not always immediately visible, but if there is a characteristic musty odor inside, but there is no spoiled food, this can indicate the beginning of its formation. In fact, mold is a fungus that grows and spreads quickly in damp, unventilated spaces. Black or dark-gray stains are a sure sign of its appearance and must be removed as soon as possible. Molds can cause allergies and respiratory illnesses. Do not use a commercially available mold remedy to clean the inside of the refrigerator since it contains chlorine. This substance is not allowed to combine with food storage areas because of its toxicity. Use folk remedies:
- Treat the affected area with hydrogen peroxide;
- Prepare a baking soda solution. Stir a teaspoon of baking soda in warm water and rub the mold well with a sponge soaked in the resulting solution;
- Moisten a cotton pad with table vinegar and treat the affected areas. Then rinse with clean water;
- Natural essential oils of tea tree or monardia will also help. A couple of drops of oil should be dissolved in a glass of warm water. This product is an excellent disinfectant.
Any of the remedies should be left on the affected area for at least 30 minutes. During this time, the fungus should die. After that the surface can be additionally washed with a soapy solution.
Useful recommendations on how and what to wash the fridge No Frost
Timely defrosting of the refrigerator is an important condition for the trouble-free operation of the unit, food safety and elimination of unwanted odors.
But not all users know that it is necessary not only to properly defrost the refrigerator, but also to properly turn it on. On all the intricacies of the process and possible problems with the device we will tell in this article.
Less widespread breakages
From not so often encountered malfunctions of the presented equipment, it is necessary to note a breakage of winding of the compressor.
This is also the symptom of a short circuit in the motor winding. The only difference is the presence of heat on the compressor body.
Another type of failure of “Samsung No Frost” refrigerator is a jamming of compressor motor. In this case there will be no rotation of the motor.
Loss of motor performance is also possible. This condition is accompanied by a lack of operating pressure in the system and the refrigerator does not shut down.
Less common breakdowns
From not so often encountered malfunctions of the presented equipment it is necessary to note a breakage of winding of the compressor.
The same symptoms occur when there is an inter-twist in the winding of the electric motor. The only difference is the presence of heat of the compressor body.
Another type of malfunction of the Samsung No Frost refrigerator is the jamming of the compressor motor. In this case, there will be no rotation of the motor.
Loss of motor performance is also possible. It is accompanied by the absence of operating pressure in the system, the refrigerator in this case does not turn off.
How to defrost your fridge fast
Manufacturers warn: correct defrosting. natural. And it takes at least 12 hours. But if you’re in a hurry, the process can be sped up.
Please note: Exposure to hot air can damage the appliance. Rapid temperature changes can warp or even crack the plastic. And if you greatly overdo it, the tubes through which the refrigerant flows will crack. After that the refrigerator will stop freezing and you will have to call a master.
Weigh all the risks before using the rapid defrosting technique.
Using a hair dryer
A thick layer of ice can be melted with a hair dryer.
- Turn the appliance on and direct a jet of hot air at the freezer.
- Hold your hair dryer correctly at least 20 cm away from the freezer. Move the hot air jet constantly and do not direct it at the rubber gasket.
- The ice will gradually crack. Gently move the broken ice and remove it with your hands.
Using a fan
A slower but safer method is to defrost with a fan.
- Position the appliance in front of the refrigerator at a distance of 0.5 to 1 m.
- Direct the air jet into the cabinet. A fan will push room temperature air into the freezer, blowing out the cold. The defrosting time will be two to three times faster.
Make sure water flowing from the refrigerator does not come close to the fan cord. Do not leave the appliance unattended.
Using a bowl of hot water
This is a very simple and cheap way: put a container of boiling water in the freezer.
- Fill a suitably sized pot with boiling water.
- Put a wooden or plastic board in the freezer.
- Put a hot dish on it. Never place the plastic directly on top of the plastic. the temperature contrast can cause it to burst.
- When the water cools down, reheat it and put it back in the chamber.
Repeat the procedure until the ice begins to crack.
Other Ways
You can use a heater instead of a fan. It’s more convenient if it’s a model with a fan, but an ordinary one will do as well.
And you can substitute a pot of boiling water with a normal heating pad. But you’ll have to change it a lot more often.
If there is not much frost, wipe it with a cloth soaked in hot water. This way you both defrost the camera and wash it at the same time.
This is important! Under no circumstances should you break off the ice or tear it off with your hands. So you will damage the walls of the freezer and the channels in which the freon circulates. At best, you’ll have to pour refrigerant into the system. At worst, replace the damaged parts. For expensive models of “Liebherr” such repair costs several thousand.
Defrost intervals
It is better to wash the inner surfaces thoroughly How often you need to defrost the refrigerator will prompt the instructions for use of the device. The regularity of this process depends directly on the defrosting method. Types of thawing:
Manual defrosting. in quality refrigerators, this implies that once a year, you will have to turn off the appliance and remove frost and ice from the freezer.
Pour out the waste water and wash the interior thoroughly. The process takes about 3-4 hours.
With drip system
Pros and cons of a refrigerator with a drip system
Drip system. used in many modern refrigerators, quite productive and easy to maintain.
The principle of operation is that the evaporator is located on the rear surface of the refrigerating chamber, under it from below there is a drain.
As long as the compressor is on, ice forms on the wall. After switching off, the ice begins to melt, the droplets flow into the drain and then into a special reservoir for liquid.
Already from there the moisture evaporates. Defrost schedules and times are set automatically, no need for user intervention.
No frost
Pluses and minuses of No-frost refrigerator
No Frost. the main feature is the evaporator and the powerful fans. They provide for automatic defrosting and operation without formation of frost and ice.
Practically maintenance-free, it cools evenly and maintains the set temperature. Specialists recommend defrosting once every 12 months.
With automatic defrosting system
In expensive appliances with an automatic defrosting system, the user does not need to think about the frequency of this process because the automation will do everything by itself.
This is usually programmed for once a month. the appliance does not need to be unplugged.
If the refrigerator is left open for a long time, the warm air that enters the chamber forms condensation droplets. The device is wasted and the radiator overheats, which accelerates wear and tear and reduces the service life.
Cleaning an unplugged refrigerator is fraught with bad freezing later.
To prevent the No Frost system, which most modern refrigerators are equipped with, from failing, it is important to unplug the appliance before washing.
Quick Freezer Cleaning
Start defrosting your refrigerator by adjusting the temperature to zero, and only then unplug it. Usually takes three to eight hours to defrost.
Washing the outside of your refrigerator should begin by unplugging it. This is primarily for safety, as contact with a wet rag with a running household appliance can cause an electric shock.
Be sure to dust the condenser, which is located at the back of the refrigerator. A long, narrow brush or a vacuum cleaner will do the job.
How to clean the inside of an appliance quickly without defrosting it?
Though no-frost fridge presupposes automatic defrosting, this procedure should be performed manually at least once a year. Capital cleaning includes a quality cleaning of all sections, including the freezer.
If not much time has passed since the last defrost and the refrigerator needs cleaning, you can do without defrosting.
However, you will have to act quickly:
- The refrigerator is disconnected from the mains;
- leave the freezer closed;
- quickly retrieve, wash and dry all the shelves;
- Remove dirt from the internal walls of the appliance;
- Clean the fridge from the outside;
- Carefully collect all the moisture. for this it is better to use paper towels;
- Install the components in place, put the food on the shelves.
In advance you need to take care of cleaning agent. If store compounds are immediately ready to use, then improvised solutions require making.
Handmade remedies
In every home, there are compositions that can be used for the care of the refrigerator:
Soda as a refrigerator cleaner. Use it not in pure form, on its basis prepare a solution. Two tablespoons of baking soda per 1 liter of water. After all surfaces have been treated, the solution must be removed with a clean, damp cloth.
The listed compositions can be combined. A mixture of vinegar and baking soda is used for particularly difficult areas.
Household chemicals
You can clean the fridge no-frost with the help of specialized household chemicals, which are let in for this very purpose. These products are available in retail stores and online.
In addition, refrigerator manufacturers develop compositions designed specifically for their brands. They claim that such chemistry is safe and most effective. However, branded fluids are expensive and rarely available on the market.
How to wash a new refrigerator before first use
Buying a new refrigerator, people rush to fill it with food and plug it in, not interested in the instructions for the first start-up. As a result, this leads to various problems and an unpleasant chemical odor during the operation of the unit. To prevent this, it is important to wash your new refrigerator thoroughly before first use.
