Connecting the drain of the dishwasher to the sewer

Connection and installation of a dishwasher. Instructions for the phased installation and connection of PMM

The correct work of the dishwasher depends not only on the quality of spare parts and assembly. The uninterrupted functioning and normal execution by the aggregate of the main tasks is influenced by the correct connection of the dishwasher to communications. Want to do this work yourself, but doubt that everything will work out?

We will help you in the implementation of the plan. The article describes in detail the stages of installing equipment, connecting a socket, water supply and the arrangement of a drain system. In order not to encounter an accident, leak or quick repair, you need to adhere to the recommendations of the manufacturer indicated in the instructions.

The main stages of connection

Successful connection of communications (electricity, water, sewage)

Conventionally, the PMM commissioning process can be divided into three main stages:

The principles that are guided by each stage of connection are quite simple and are based on the rules of operation of a particular type of resource (water and electricity).

Failure to comply with certain norms can lead to emergency situations in the operation of the machine and be source of danger during its operation.

An additional details will be required to install the machine:

• Specialized siphon for draining (installed on the sink)
• Water taper tap
• Connecting hoses (if they do not come with a dishwasher)
• Clamps for fixation
• Grounding socket
• Protective differential machines or a protective shutdown device (RCD) if they were not provided for in the project of the room

Elements for connecting a dishwasher to the water supply

Tools necessary for installation:

At each of the stages of installation, various errors may occur. These mistakes, at first insignificant, are able to later lead to undesirable consequences. To avoid them, we will consider each of the stages in more detail,

Ways to connect the drainage system:

Regardless of which drain you choose, do not unscrew the plum valve from the dishwasher hose. The check valve protects the machine from waste from drainage. Form a loop from a drain hose in the form of the letter “U”. This is easy to do with a special insert. Observe the height of the drain. 40 centimeters. So the machine “does not zoom” if you release water from the bath or the toilet tank. One end of the hose is screwed to the dishwasher, the second. To a siphon or tee, crashed into a pipe. Process the joints with a sealant, wrap the “fumka” so that there is no breakdown and the flood.

Ready! You independently connected the dishwasher to the drainage. Other important tasks of connecting will help solve

Connection of the slab, dishwasher and oven

Hybrid 2, 3 in 1 technique is deservedly popular-because it saves such a valuable space. Features of connecting such a technique depend on its type. The dishwasher is connected according to the above scheme. Electric hob and oven will require additional sockets. If the oven, gas stove. Contact the gas service. It is very dangerous to carry out such work on your own.

Now you know how PMM connects in the kitchen. To do everything right, watch the training video

Plum connection to sewage

If the installation of a dishwasher is performed next to the sink, you should pay attention to the siphon that removes the liquid from the sink to the sewer. If it does not have free bends, it is necessary to purchase a siphon with one additional withdrawal or two at the plumbing store (if you need to connect a washing machine).

Siphon with two taps for washing and dishwasher

Divids are equipped with conical fittings, which have the shape of an inverted letter V (see. A photo). This form is not random. The bend directed upwards prevents the spread of odors from the sewage system, and also eliminates the reverse fluid current from the sewage system to PMM.

Connection of PMM to the sewage system through the tee

There is also a variant of direct connection to a pipe through a tee with a slanting withdrawal (see. A photo). A special device is used to organize the upper bend of the drainage hose, which can be attached to the wall. So that unpleasant odors do not penetrate into the room, at the junction of the tee and the drain hose, a sealing coupling made of rubber should be installed.

Check the tightness of all connections, connect the dishwasher to the mains and perform the first inclusion. It should be carried out without dishes. To wash the bunker, you need to use special cleaning tablets or cleaning and disinfectant for PMM. Only after the first inclusion, the dishwasher can be installed in a furniture niche.

As you can see, connection to communications can be performed independently. We hope that our article will help you do this work.

Necessary tools and components

You can connect Electrolux dishwasher taking into account the recommendations set forth in the operating instructions. For independent work, you will need:

• Electric drill or peorator with the corresponding mode, nozzle.
• Cross.Shaped and flat screwdrivers.
• Connecting a dishwasher to the sewage system provides for the use of pipes to create a diveting system. For work, a hacksaw or special scissors is required. Changing the length of each section is carried out with the cleaning of the end surface.
• The construction level that is used to check the angle of inclination of the sewer pipe and the location of the PMM.
• Set of wrenches.
• Kusachki and well.Stained knife.
• FUM tape. Connect the dishwasher to the water supply and sewage system simply due to the use of threaded joints, which must be securely isolated.
• Drown crane with a diameter of the inch to create branches of the pipeline.
• Siphon is required to organize plum. If a washing machine is located in the immediate vicinity, then you can use 1 siphon to remove effluents from 2 devices.
• In the absence of a powerful outlet with the correct grounding, a three.Core wire with high.Quality insulation is required. To increase safety, a separate fishing line for a trimmer is created, designed to power PMM.

For a dishwasher, hoses are required, t.To. Those that are included often do not have the required length. The connection of individual sections is carried out using clamps. The tee is required to create a complex water supply system. The water supply of the Siemens dishwasher is not largely different from the system that is created for the equipment of other manufacturers.

Do I need hot water PMM?

The temperature of the liquid in the PMM tank depends on the selected regime. What water does the dishwasher wash, in the algorithms. The temperature level in the water supply may exceed the permissible norm of the program, which is fraught with breakdown of the sensor, other mechanisms.

You can watch the process of connecting PMM with your own hands in this video

Reviews, additional recommendations on how to connect equipment are under the video.

After such careful preparation, you can easily cope with the task. Do not forget to start the test mode, check the communications for leaks. Good luck!

Connecting to the water supply

Connecting a dishwasher to the water supply occurs using a standard hose, which is also located on the back of the case. It is easy to find out by a rather large nozzle. This is a transfusion block. It is needed for correct work and it is not recommended to delete it.

Pully and drain hoses are attached from behind

Now about which water to connect a dishwasher to. You can only be connected to hot in one case. If your unit supports such a function (indicated in the description) and you do not have a meter on the hydroelectric power station. It is better to pour cold water into the machine in all the others. The main motive for connecting to the DHW is electricity saving. If the water is hot, it does not need to be warm. This is so, but such a decision has disadvantages:

• Hot water carries more contaminants than cold and your machine will fail faster.
• DHW temperature often exceeds the limits permissible for equipment. This reduces the life of the equipment again.
• If the counter is on the hot water, the savings are very small. Cons is clearly outweighed.

You can connect to the water supply at any point where there is a detachable connection. For example, in the place where a flexible hose is connected to the sink. It is unscrewed, put a tee, then a ball valve (or a tee with a ball crane at once). To the part that a dishwasher is connected to the crane, on the second output is a flexible hose to the Moika mixer.