Hansa plate stopped working oven and light

The electric stove does not work

The electric stove does not respond to pressing the power buttons or all indicators begin to flash at once, after turning on the burner or oven, nothing happens. The reasons because of which the electric stove does not work, and the indicators do not burn or blink, may be very diverse: among them are simple, which you can well fix it yourself (problems with a socket or cable of power), and complex ones that can only repair qualified professional master, for example, malfunction of the control module.

What to do if an electric stove does not turn on, a hob or an induction stove Bosch, Ariston, Hansa, Beko and plates of other brands. Further in this article we will tell you how to clarify the root cause of the breakdown, and what is better to undertake in such a situation.

HANSA FCCW580009 How To Wire Hansa Electric Stove

In most cases, the lack of electricity is to blame, but the reasons for this may be different. In modern devices, sometimes the inclusion of the plate blocks its electronics, for example, when you fail one of the fireplaces or the oven ten.

No electricity

Symptoms: indicators do not burn, control buttons and switches do not respond

This is one of the few problems that the owner of the electric stove may well fix it independently, even if he does not have special tools. If the indicators do not light up on the electronic display of the hob, then most likely, power supply does not enter the stove at all. Naturally, there are no at all fatal cases like turning off electricity throughout the house or entrance.

To get started, check the power cable: purely visually everything should be in order, the fork is intact and sound, the wire will not be lined and not melted anywhere, the fork is not hot to the touch. If the problems are in the fork, then either replace it, or, if it is not collapsible. Replace the entire power cable. If the power cable is pushed somewhere, it is better, of course, not to take risks, and replace it.

It is possible that some problems in the electrical wiring at the place of connection of the electric stove: install it is easy. Show the power cord of some other electrical appliance in it that you just checked in another outlet. You can try to turn on the stove in another outlet if the cable reaches for it or you have a suitable extension cord. If no devices in the outlet work, first you start to look into the distribution electrical panel: if in your apartment there is a separate automatic rosette there, then it could simply “knock it out” and turn it on to turn on the switch; True, the question remains, why “knocked out”. In other cases, it is better for you to call an electrician. If other devices do not work in other sockets, most likely the power supply of sockets of the entire apartment “knocked out”. You again need to go to the shield. By the way, if, after repeated turning on the electric stove, the machine “knocks out” again, then your affairs are bad: such symptoms indicate the presence of a short circuit in the electrical network of the plate, and here you can not do without a master.

It is possible that your voltage in the mains goes beyond the limits allowed for this model: usually from 200 to 240 volts. If you have a voltmeter, check the voltage in the outlet: if it is not in order or there is nothing to check, you will have to call an electrician.

The main causes of the malfunction

So, the household device decided to break at the most inopportune moment. You can’t bake chicken, buns are also forced to wait. Error codes appear on the control panel. There can be several reasons for such an unpleasant situation, they can only be determined by the results of professional diagnostics.

The oven does not turn on in the electric stove, because:

These breakdowns are often found in products from Beko, Indesit, Hansa, Gornje and some other companies. Consider the main causes of malfunctions, their signs and methods of repair.

Damage to internal wiring

The reason that the oven does not heat up and the bulb does not burn, can lie in damage to the outer cord, which leads to a socket. It can burn out or damage, so the electrical appliance does not receive the necessary power. Changing the cord will help solve the problem, which any brittle owner will cope with.

If the electric shower is turned on, but the fan does not work and there is no backlight, and the heating elements remain cold, the problem is most likely in the breakdown of the internal wiring. It is difficult to determine a malfunction of this type without special tools, so you should contact highly qualified masters. Our experts will carry out high.quality repair and replacement of damaged wires.

Ten malfunction

The oven can work normally at first glance, but the food does not warm up normally, one part will burn, the other. remains half.dried. This picture indicates a malfunction.

Ten is a heating element, which is a pipe with a simple pencil, in which a wire of material with high resistance is located. So that the walls of the tube and the delay do not contact, the voids are filled with a special substance. magnesia. The overall cabinets and burners use the same heaps, they can be three types:

If the electric shower warms weakly or does not heat up at all, first of all you need to pay attention to the heater. They are located in the upper and lower part of the oven. The working part should glow with even red light and heat up hard. In the event of a malfunction, heat does not release, black spots or unevenness on the surface of the heater, holes can form on the wall of the tube. Check if there was a short circuit that led to a malfunction, you can use a multimeter.

The switch broke

In electric shows, the switch is located outside the handle, which regulates the heating temperature. If this part is out of order, the electric signal does not reach the heater, so the electrical appliance does not work.

Check the serviceability of the switch is easy. You need to turn off the power, pulling out the plug out of the outlet. After that, the temperature adjustment handle is transferred to the “0⁰” position, then slowly rotates clockwise to the maximum, and then back. A working switch must click.

If there was no click of the oven disconnected from the network, it is necessary to transfer the temperature adjustment handle to the “0⁰” position, insert the fork into the outlet and slowly turn the handle until the click is heard. After that, you do not need to touch the regulator more. If everything is in order with the switch, it automatically turns off after a few minutes. Otherwise, it will require the replacement of the part.

Thermostat

If the oven is constantly overheated, and the dishes are buried, we can talk about the malfunction of the thermostat. This device is required to control the temperature and avoid overheating. There are electronic, mechanical and electron-mechanical thermostats. The device is rarely broken, but still owners of units from Beko, Gorenje, Indesit and Hansa periodically complain about problems with the temperature regime.

Determine that the thermostat works incorrectly, you can use a regular thermometer for oven cabinets. It must be placed inside, then turn the temperature adjustment handle for minimum heating. A working thermostat should turn off the heating elements after about 10 minutes to save the temperature. The thermometer needs to be taken out and checked whether its indicators correspond to the numbers indicated on the temperature adjustment handle. After that, you need to open the door so that the oven is cooling. When the temperature decreases, the thermostat should turn on the heating elements.

Such diagnostics will help to reliably determine the existence of a thermostat problem. Most experts recommend replacing it as soon as problems with the adjustment of heating appear, since it is unprofitable to repair the device.

When the oven of an electric stove does not work and does not turn on, the reasons can be very different: among them are simple, which you can well fix it yourself (problems with a socket or cable of power), and complex ones that can only be repaired by a qualified professional master, for example,, for example, Management of the control module or problems in the internal wiring.

What to do if the oven of an electric stove, a hob or an induction stove Bosch, Ariston, Hansa, Beko and other brands is not turned on. then in this article we will tell you how to clarify the root cause of the breakdown, and what is better to undertake in this situation.

In most cases, the lack of electricity is to blame, but the reasons for this may be different. In modern devices, sometimes the inclusion of the heating element blocks its electronics, for example, with a faulty thermostat.

Problems in the terminal block

Symptoms: In addition to the oven, part of the firewood does not work, for example, only one half

hansa, plate, stopped, working, oven, light

The oven may not be turned on due to the fact that initially when installing the wire plate in the terminal block were connected incorrectly. For example, in the sensory panels in the block, electronics of the plate are powered through one terminal, and through others. burners and oven: during incorrect connection, a situation may well arise when all indicators are burning and the sensors react, but the oven does not turn on.

Of course, situations are not excluded, of course, when after prolonged operation the contacts in the terminal block were oxidized or damaged: it is necessary to inspect the contacts in the block, clean them and re.connect them again.

How to repair electric duch on your own?

Speaking of an electric stove, we mean a combined device of the oven and the hob, which are enclosed in one metal box. Therefore, before the start of the repair, you need to understand how to get to the oven itself. After all, a visual examination from the inside will practically not give any information about the problem.

To understand what you can encounter inside, you need to know the design of the plate. This knowledge will help not get confused when disassembling and repairing the oven.

How to unlock the electric stove (induction cooker)

Construction and device of the plate

Usually all electric stoves have an identical structure. The differences are only in the private details of certain nodes:

  • Hob. This is the upper part of the device with burners. It is cooking on it. It can be made in the form of separate firewood firewalls or metal heating. It can also have a glass.ceramic coating (how to repair slabs made of glass ceramics?).
  • Control Panel. It houses the main temperature controllers for each burner and separately for the stove.
  • Oven control unit. Most often it is an independent programmable device.
  • Oven. Most of the electric stove, the temperature in which can reach 300º. The oven can be additionally equipped with an external heating plane (grill) and a fan to create convection.
  • Lower open shelf. Serves to store baking sheets, gratings, and other small kitchen belongings. Including the function of the air barrier, which protects the flooring of the room from excessive heating.
  • Metal walls. The rear and side steel sheets covering the insides of the electric stove from moisture, dirt and other litter.

The sensor is faulty

A faulty temperature adjustment sensor in the touch panel will lead to the same consequences as a broken mechanical power switch. Only now it is much more difficult to fix something in the touch panel-here, here, without good knowledge of the stove and special diagnostic equipment, you can’t do in any way.

A faulty thermal attemptor does not transmit the temperature data to the control module, and he naturally turns off the oven or the entire stove in order to avoid the breakdown of other units of the stove due to overheating. Worse, if the sensor works, but incorrectly, for example, due to sticking the relay contacts: then overheating with all the arising from here the sad consequences is possible. If you notice that the oven quickly turns off or, especially if it clearly overheats, you must urgently call a specialist who will understand the reasons for the problem.

Problems with the seal

There is a seal in the oven, which prevents heat loss: if it is worn or has mechanical damage, the temperature in the oven may not rise to the value you given. It is possible to replace the seal, in principle, but in some places it is difficult to get to it and you will need to disassemble and dismantle it.

Heat will leave the oven and with a loose adjacent oven door. This can be caused by different reasons: damage to the loops, deformation of the door, a faulty latch.

✨ OVEN TOUCHSCREEN NOT WORKING — EASY FIX ✨

The switch broke

Symptoms: the oven does not turn on or works only in some positions of the switch

One of the most common reasons that do not turn on the oven. Migitor malfunction (toggle switch) of the modes. Under prolonged service with difficult conditions of high temperatures, contacts of contacts can weaken, or the contacts themselves can burn: the possible reasons can be read in the article “The switch does not work”. The faulty switch must be replaced.

The sensor is faulty

The faulty sensor of the selection of modes in the touch panel will lead to the same consequences as the broken mechanical switch. Only now it is much more difficult to fix something in the touch panel itself. Here, without good knowledge of the electrical circuit of the stove and special diagnostic equipment, you can not do in any way.

With a breakdown of the timer, as in the case of problems with the control board, it is difficult to predict the behavior of the oven: it may not turn on at all due to protective blocking, can quickly turn off due to the wrong team of a faulty timer. It is usually possible to determine the cause precisely only with the help of special diagnostic equipment.

Tips on how to extend the life of the oven in an electric stove

So that the oven breakdown does not happen, and the unit served as long as possible listen to the following tips.

  • It is necessary to clean the inner surface of the oven neatly. Soft sponges are suitable for these purposes. Metal brushes scratch the surface, so using them is not recommended. Ideal creamy or cleaning products.
  • If there are aluminum elements on the outer surface of the oven, then before washing it is recommended to lubricate them with vegetable oil. End the procedure with alcohol.based cleaning agent.
  • A solution of vinegar will cope well with pollution. This method is suitable for internal surfaces.
  • To remove accumulated fat, and with it an unpleasant smell, you need to put a frying pan from 1/3 cup of ammonia in a not.waristic oven in a warmed oven.
  • If the menu involves the preparation of a pie with a juicy filling, the drops of which are left with difficult spots, it is appropriate to put a deep tray.
  • No need to put dishes with a raw bottom in a hot oven.
  • With old fat pollution, you should warm the device up to 50 degrees. Then wipe the inside of the wet soft rag.
  • Cleaning the external parts of electric articulation should be carried out in the state turned off from the network. This will not fail in software settings.
  • It is better to clean the glass door with a soap solution.
  • It is necessary to periodically (once every 2-3 months) visual inspection of the main elements.
  • In the inaccurate state, the door should be closed.
  • All switches need to be washed very carefully. The oven must be turned off.

In the hands of a caring housewife, any item of household appliances will last a long time. It is important to regularly check the elements of the oven cabinet. Take care of them, observing recommendations. With proper operation, this electrical device is able to last up to 15 years.

Hansa plate stopped working oven and light

The reasons below arising in the case when there is no light in the oven of the kitchen plate, indicated from the most probable to the least probable. Check or test each reason, starting with the most likely reasons.

Reason 1 module of the lamp

If the lamp is burned out, it may be necessary to replace the entire lamp module. It often happens that the components of the lamp module are not sold separately.

To determine whether the light has burned out, use the multimeter to check it for continuity, or set the lamp in an identical nest for checking it.

Reason 3 cartridge light bulb

Use a multimeter to check the power of the bulb cartridge. If the cartridge receives food, but the lamp does not work, then this means that the cartridge is faulty and it should be replaced.

Reason 4 Lighting switch

To determine whether the lighting switch is faulty, use the multimeter to check it for continuity and if it is disturbed, replace the switch. Reason 5 touch panel and control panel

The touch panel and control panel regulate the current supply to all components of the plate, including the oven lamp. If the touch panel and the control panel block are faulty, then they will not signal the control panel of the slab to turn on the oven lamp. However, this is rare. First check the light bulb and cartridge. If the light bulb and the cartridge are not damaged, then perhaps the touch panel and the control panel are faulty.

Reason 6 touch panel

On the touch panel there is a button that controls the light in the oven. If this button is faulty, the touch panel will not signal the control panel to turn on the light in the oven. However, this is rare. First check the light bulb, socket and switch. If none of these components is broken, then the touch panel may be faulty. Reason 7 transformer

The transformer may be faulty. However, this is rare. First check the light bulb, cartridge and lighting switch. If none of these components is broken, then the transformer may be faulty. The transformer is not repaired. If it is broken, then it must be replaced.

Hansa plate stopped working oven and light

The following reasons that occur in the case when the oven / kitchen plate does not heat up are indicated from the most probable to the least probable. Check or test each reason, starting with the most likely reasons.

Reason 1 lighter (igniter)

Built.in lighter (igniter) is the most commonly broken part for heating the gas oven. The lighter has two main functions. Firstly, it supplies current through the overslaughter of the oven to open it. Secondly, the lighter is quite hot to light the gas in the oven. If the lighter is not serviceable, then it will not be able to open the safety valve correctly. If the valve does not open, then the oven the oven does not heat up. To determine whether the igniter is defective, watch it when the oven ovens is turned on. If the igniter (lighter) is heated for more than 90 seconds without ignition of a gas flame, this means that the igniter is too weak to open the valve, so it should be replaced. If the igniter does not shine at all, then use a multimeter to test its integrity. If the continuity of the igniter is violated, then replace it.

Reason 2 Lower heating element (TEN)

When the lower heating element (TEN) is heated properly, it glows red. If the element does not glow red, then this means that it does not heat up. Often, if the heating element has burned out, then it will be noticeably damaged. Inspect it for the presence of holes or charms. To determine whether the lower heating element has burned out (TEN), use the multimeter to check for continuity and if it is broken, then replace it. Reason 3 of the spark electrode of roding upper and lower burner

hansa, plate, stopped, working, oven, light

For ignition of the oven burner, the spark electrode of ignition is used. The electrode is located next to the burner and works like a spark plug. When the current passes through it, it skipped the spark from the tip of the spark electrode to the electrode screen, thereby lighting the gas. If the electrode is broken or worn out, then the spark may not skip. Visually, inspect the electrode node for the presence of cracks in the Faor case or damage to the electrode tip. Keep in mind that the correct grounding and the correct polarity of the incoming voltage into the plate are necessary for the electrode to detect the presence of a flame after ignition of the burner. If the burner has gone out after ignition, then check the correct grounding and polarity in the outlet.

Reason 4 upper heating element (TEN)

Inspect the upper heating element (heating element) for the presence of holes or fragments. When the upper heating element (TEN) is heated properly, it glows red. If the element does not heat up, then this means that it does not heat up. It often happens that a burned.out element (heater) is noticeably damaged. To determine whether the upper heating element has burned out (Ten), use the multimeter to check it for continuity. If the continuity of the element (heating) is broken, then replace it.

Reason 5 Problem of incoming current

Electric plates require 240 to stress. Gas stoves require 120 to stress. If the plate does not turn on, then a problem with an incoming voltage that should be checked by a multimeter on a wall outlet is possible.

Reason 6 Thermal Examiner

If the plate overheats, then the heat.guide is triggered to turn off the power supply. If the heat.guide is burned out, then the stove does not heat up. However, this does not happen often. To determine if the heat.guide is damaged, use the multimeter to check its integrity. If the continuity of the heat.subject is violated, then replace it. Thermal subject cannot be turned on again. If it is burned out, then it must be replaced.

Reason 7 wiring gap

One of the wires supplies to the heating element (heating) or igniter can burn out. These wires usually burn near the heat source. To determine whether the wire has burned out, check the wires leading to the element or igniter. If the wire is burned out, then this is usually noticeably with the naked eye.

Some kitchen slabs have a relay fee. The relay fee has several relays that control the flow of current to the heating element. If one or more relay does not work on the relay fee, then the stove does not heat up. If the relay fee is faulty, then replace it.

Reason 9 Panel Control of the kitchen slab

On the control panel of the kitchen slab there is a relay that supplies current on the chain of the lower and upper heating element (heating element) in accordance with the user settings and data from the sensor data. If the control board is faulty, then it will not be able to submit current to heating components. However, this is rare. Before replacing the control board, first check all the heating components. If you decide that all heating components work correctly, then replace the control board. Since checking the control panel is not easy, you will have to replace the control board if you suspect that it is faulty. Reason 10 safety valve

The gas valve of the gas stove works with an igniter (electric linen) to ensure the supply of gas to the burner. If the safety valve fails, then the oven does not heat up. However, this is rarely caused by a malfunction. Before replacing the safety valve, first check more and more more often the breakdown components of the plate, especially the igniter. If all other heating elements work correctly, then use a multimeter to check the safety valve for continuity. If the continuity of the safety valve is broken, then replace it.

Reason 11 Thermostat of temperature control

The thermostat of the plate regulates the temperature in the oven. If there is a problem with heating elements (heating plants) in the oven, then the thermostat of the plate can be faulty. The thermostat has a thin copper tube attached to a slightly thicker tube brought into the oven. There is a hydraulic fluid inside this tube. Когда температура тэна поднимается, то жидкость расширяется и надавливает на небольшой активатор внутри термостата и отключает нагрев. Когда тэн охлаждается, то давление уменьшается, и активатор снова позволяет тэну нагреваться. The thermostat of the oven is difficult to check and it is not repaired. If this is the cause of the problem, then the thermostat of the plate must be replaced.

Hansa plate stopped working oven and light

The following reasons that occur in the case when the oven of the kitchen slab is not turned on, indicated from the most probable to the least probable. Check or test each reason, starting with the most likely reasons.

Reason 1 lower heating element

Когда нижний нагревательный элемент (тэн) нагревается должным образом, то он раскаляется до красна. If the element is not hot, then this means that it does not heat up. Often, if the heating element burns out, then it will be noticeably damaged. Inspect it for the presence of holes or charms. To determine whether the lower heater has burned out, use the multimeter to check it for continuity. If the continuity of Ten is broken. Replace it.

Reason 2 lighter (igniter)

hansa, plate, stopped, working, oven, light

Built.in lighter (igniter) is the most commonly broken part for heating the gas oven. The lighter has two main functions. Firstly, it supplies current through the overslaughter of the oven to open it. Secondly, the lighter is quite hot to light the gas in the oven. If the lighter is not serviceable, then it will not be able to open the safety valve correctly. If the valve does not open, then the oven the oven does not heat up. To determine whether the igniter is defective, watch it when the oven ovens is turned on. If the igniter (lighter) is heated for more than 90 seconds without ignition of a gas flame, this means that the igniter is too weak to open the valve, so it should be replaced. If the igniter does not shine at all, then use a multimeter to test its integrity. If the continuity of the igniter is violated, then replace it.

Reason 3 of the spark electrode of roding upper and lower burner

How to unlock the electric stove (induction cooker)

For ignition of the oven burner, the spark electrode of ignition is used. The electrode is located next to the burner and works like a spark plug. When the current passes through it, it skipped the spark from the tip of the spark electrode to the electrode screen, thereby lighting the gas. If the electrode is broken or worn out, then the spark may not skip. Visually, inspect the electrode node for the presence of cracks in the Faor case or damage to the electrode tip. Keep in mind that the correct grounding and the correct polarity of the incoming voltage into the plate are necessary for the electrode to detect the presence of a flame after ignition of the burner. If the burner has gone out after ignition, then check the correct grounding and polarity in the outlet.

Reason 4 upper heating element

Perhaps the upper heating element (TEN) has burned out. Когда верхний тэн нагревается должным образом, то он раскаляется до красна. If the element does not heat up, then this means that it does not heat up. Often, if the element is burned out, then it will be noticeably damaged. Inspect the heater for the presence of holes or burnouts. To determine whether the upper heater has burned out, use the multimeter to check it for continuity. If the continuity of the upper heating is broken. Replace it.

Reason 5 Problem of incoming current

Electric plates require 240 to stress. Gas stoves require 120 to stress. If the plate does not turn on, then a problem with an incoming voltage that should be checked by a multimeter on a wall outlet is possible. Reason 6 Thermal Examiner

If the plate overheats, then the heat.guide is triggered to turn off the power supply. If the heat.guide is burned out, then the stove does not heat up. However, this does not happen often. To determine if the heat.guide is damaged, use the multimeter to check its integrity. If the continuity of the heat.subject is violated, then replace it. Thermal subject cannot be turned on again. If it is burned out, then it must be replaced.

Reason 7 wiring gap

One of the wires supplies to the heating element (heating) or igniter can burn out. These wires usually burn near the heat source. To determine whether the wire has burned out, check the wires leading to the element or igniter. If the wire is burned out, then this is usually noticeably with the naked eye.

Some kitchen slabs have a relay fee. The relay fee has several relays that control the flow of current to the heating element. If one or more relay does not work on the relay fee, then the stove does not heat up. However, this is rare, so check first all other heating components of the plate. If they are all working, then the relay fee is possible, and you need to replace it.

Reason 9 Panel Control of the kitchen slab

On the control panel of the kitchen slab there is a relay that supplies current on the chain of the lower and upper heating element (heating element) in accordance with the user settings and data from the sensor data. If the control board is faulty, then it will not be able to submit current to heating components. However, this is rare. Before replacing the control board, first check all the heating components. If you decide that all heating components work correctly, then replace the control board. Since checking the control panel is not easy, you will have to replace the control board if you suspect that it is faulty.

Reason 10 safety valve

The gas valve of the gas stove works with an igniter (electric linen) to ensure the supply of gas to the burner. If the safety valve fails, then the oven does not heat up. However, this is rarely caused by a malfunction. Before replacing the safety valve, first check more and more more often the breakdown components of the plate, especially the igniter. If all other heating elements work correctly, then use a multimeter to check the safety valve for continuity. If the continuity of the safety valve is broken, then replace it

Reason 11 Thermostat of temperature control

The thermostat of temperature control controls the temperature inside the oven and is cyclically heated when the temperature in the furnace becomes too low. If the temperature thermostat does not work, then the oven does not turn on. However, this is rare. Before replacing the thermostat of the oven, first check more often breaking components, in particular, igniter and heating elements. If these components are not damaged, then the temperature thermostat may be faulty. The thermostat of temperature control cannot be easily tested. If you suspect that the thermostat is faulty, then replace it.

About the author

| Denial of responsibility | Contacts |RSS