How many liters of water in the gas boiler is Conord

What is good gas boiler conifer. characteristics, advantages, types

It’s no secret that imported floor gas boilers have higher quality compared to domestic boilers. This applies to the material of the manufacture of elements, and the reliability of automation, and assembly of the device. However, the price of imported analogues is significantly different in the way. Our task is to find a gas boiler of assembly, with an optimal price-quality ratio.

I propose to disassemble floor gas boilers Conord reviews that can be found more and more often on various thematic forums. Consider the lineup, technical characteristics, device, types of automation (gas.regional devices) using instructions for use.

Lineup and description of Konord boilers

Floor gas boilers Konord are produced by a capacity of 8 to 30 kW. They are like single-circuit: KSC-G-8, KSC-G-10, KSC-G-12, KSC-G-16, KSC-G-20, KSC-G-25, KSC-G-30;

and double-circuit: KSC-GV-10, KSC-GV-12, KSC-GV-16, KSC-GV-20, KSC-GV-25, KSC-GV-30.

Single.circuit can only be used for heating from 30 to 300 m2. Double.circuit gas boilers of Konord can be used for water heating and receiving hot water supply (DHW).

It is important to note that if you need a double-circuit boiler for the full use of the DHW circle, you need to buy a caonord boiler with a power indicator of 20-25 kW. In this case, it will give out about 10-12 liters of hot household water per minute

It makes no sense to buy, for example, a double-circuit boiler KSC-GV-12 with a capacity of 12 kW. He will not give us good hot water.

Boilers can be used both in open and closed heating systems.

Why Gas Boilers Are Still The Most Popular Choice

The device of floor gas boilers Conord

The boiler consists of a steel furnace with a thickness of 3 mm, a case, a water shirt, smoke pipes with turbulizers built into them to increase the efficiency of the boiler, a gas.beam device (automation), a layer of thermal insulation from the basalt cardboard, and the thermometer for monitoring the temperature of the coolant. In double.circuit models, a special coil for a water circuit is installed around smoke pipes.

The input and output of the coolant, as well as the coil for DHWs are on the back of the boiler housing. The diameter of the threads for connecting heating for all models of this brand is 2 inches or 50 mm. For the circuit DHW 1/2 or 15 mm. The diameter of the chimney for models with a capacity of 8 to 12 kW is 115 mm, for 16 kW and higher. 150 mm.

Due to the taxed turbulars and good thermal insulation, the KPD of the Konord boiler reaches 90%. These heating devices are capable of working at low gas pressure and are completely energy.dependent from electricity. The manufacturer announces the service life of the boiler for 15 years and the factory guarantee for 3 years, which is also indicated in the instructions for operation.

On the floor boilers of this brand, automation of three types can be installed:

In general, the automation, although not particularly intricate, but unpretentious. In the case of a breakdown, it is not difficult to find spare parts for it. For example, often an failure of the bimetallic plate costs about 50.

The Euro SIT automation consists of a sectional burner and POLIDORO tubes, as well as security systems: a smoker with a thermocouple, a temperature sensor, a SIT gas valve, a traction sensor and wires. In the case of attenuation of the smell burner, disconnecting gas or lack of traction in the chimney, automation instantly blocks the supply of gas to the burner.

Ignition occurs by pressing the Piezoelent button or with a match. The temperature of the coolant is provided by the gas valve and set by the handle of the thermostat.

Honeywell automation from the American manufacturer has similar technical characteristics with a gas.burning device of the Euro SIT type. The principle of operation is the same, differs mainly by the manufacturer and material of the execution of some elements.

The ignition is carried out by clicking on the handle to the right of the thermostat and its subsequent turning to the position to the operator for the operation of the boiler in an economical mode.

Review: floor single-circuit gas boiler Konord KSC-G-12N-reliable and economical!

Advantages: inexpensive, it works properly, economical, 3 years warranty

Gas heating has its pros and cons of. On the one hand, living in the apartment, you do not need to bother with the boilers, to install them somewhere, periodically clean, light, etc. P. Waiting for when they turn on heat and all. But on the other hand, they do not always include it when you want. And you have to freeze without heating in the fall and spring, and sometimes vice versa, die from the heat. This is a huge plus of gas heating. when necessary, turn on, when you don’t need to turn off. We live in a private house, and we, in fact, do not have to choose: if you want warmth, put the boiler. So we set the Konord KSC-G-12N, when the previous one ordered to live long.

Some technical data: overall dimensions 412/342/786, weight about 40 kg. Designed for 120 square meters (we have 100, took with a small margin). The efficiency has been declared at least 90%, but how to check it? Gas consumption with nominal heat production indicates 1.35 cubic meters per hour. The boiler is steel, white, covered with heat.resistant powder enamel. All the “filling” is behind the door:

As you can see in the photo, the upper cover is not loosely. this is not a defect in the boiler, it is after a preventive examination and cleaning of the gallows (!) They put it wrong, we did not immediately notice, but we don’t want to disassemble, remove the pipe and redo it, we decided to leave it until the next time. This model of the boiler is single.circuit, we use a gas column to heat water. The boiler is energy.dependent, but we have heating with a circulation pump, t. e. When the electricity is turned off, the pump does not work, the boiler overheats and automatically turns off. Fortunately, this is rare. With primary ignition there is one inconvenience. you need to keep the button pressed for some time, the finger gets tired)

The instruction is one for several models, for me personally is not very clear, but still the boilers should be installed and served by specialists, or at least technically competent people, this is not about me:

The boiler does not, of course, have any useful and pleasant functions like a programmable inclusion at a certain time and the like as its more expensive brothers. But the manufacturer gave a guarantee for 3 years, and the promised service life is at least 15 years. Installed a boiler in the summer of 2010, 2 winters survived. It was not very warm at home only in the most severe 30-degree frosts. In general, so far everything is satisfied, only this spring, however, he began to smoke unexpectedly, I had to urgently clean (I repent, cleaned the first time, although it is necessary at least 1 time a year). It is more economical compared to the previous boiler, heating of a 2-storey building with an area of ​​100 square meters. m. It is consumed an average of 500 cubic meters per month (of course, in winter more, in the summer there is much less, but I got used to paying one year all year round, it’s more convenient for me). P.S. Unfortunately, you have to add a spoonful of tar to the previous positive impression. Today again suddenly began to smoke, 9 months have passed since the previous cleaning. So, when cleaning, experts, having removed one of the turbulars, found that in one place he burned out. Through incomplete 3 years of work.

General impression. Reliable and economical!

Solid fuel boiler don

Don universal boiler works on any solid fuel

The power.dependent universal boiler “Don” can work on any form of solid fuel. If necessary, a gas burner can be installed. On one loading of coal can work up to 8 hours.

The firebox is made of design steel, which has high resistance to corrosion. The firebox has decent volumes: firewood is placed in it up to 60 cm long (depending on the model), logs of up to 60 cm in diameter can be used. The warranty life of the boiler “Don”. 12 months.

The overall dimensions of the new “Dons” remained the same, so they are installed exactly in place of the old ones, do not require alteration of the system. The transition to gaseous fuel occurs by installing the burner in a special hole.

The technical parameters of the universal heating boilers “Don” are given in the table.

Characteristics of the boiler “Don” (to increase the click)

The installation of a universal boiler imposes the same requirements as the installation of gas, with the exception of points regarding the gas service. Read more about

Gas boilers of Konord

The Konord plant was founded in it in 1947, and since then has produced thermal equipment of various types.

During its work, considerable technological experience was accumulated, the features and disadvantages of imported models of gas boilers were analyzed, the necessary conclusions were made. Today, Konord produces several series of gas boilers, which are the optimal solution for the user.

Climate features, the state of communications, the possibility of interruptions with the supply of certain resources are taken into account.

The company relied on the release of units as independent of external conditions that can perform tasks despite the situation.

many, liters, water, boiler, conord

Energy.dependent equipment in conditions. a big plus, it gives a guarantee of maintenance of heating during a sudden disconnection of the voltage in the network. This approach is reasonable and highly appreciated by specialists and ordinary users.

High performance secrets

Modifications with thermal hydraulics. energy.dependent. The principle of operation is based on the use of the thermostat. When the temperature reaches the declared value, the gas supply to the burner stops. So the necessary heating of the coolant is maintained.

The devices are ideally adapted to harsh winters: they can be stably hold the desired heating, the main thing is to correctly calculate the power. Efficiency rises due to:

All gas boilers of Konord have a floor structure. This feature allowed the manufacturer not to save too much on the dimensions and strength of the nodes and parts.

There are different model lines:

  • Single.circuit. Intended only for powering the heating system of the house.
  • Double.circuit. The coolant for heating and hot water for household needs (DHW systems) are able to heat.

In the design of the boilers, automation of different types is used:

  • Thermal hydraulic (mechanical type).
  • Automation SIT. Automatic control unit for the operating mode made in Italy. It has a thermostat, a piezorodurgery system, a smell burner with an electrode and thermocouple.

There are also models with different types of heat exchanger:

Cast iron heat exchangers have a high ability to heat transfer and are effective in flooring. Steel nodes demonstrate somewhat reduced indicators, but, due to the large thickness, the walls of steel are 3 mm. they get the opportunity to give a sufficient amount of thermal energy and maintain performance for a long time.

Reviews of heating equipment Conord

Natalia good day to everyone! I want to thank the leading manager in Stepanova Tatyana Vasilievna! People who are so competently versed in matters of their professional activity. Real rarity! In any case, I am extremely rare for me. LLC “Konord factory” in your team is an invaluable employee, a very responsive professional in his field. I was very lucky that Tatyana Vasilievna took up the help of resolving my issue. THANKS.

Bought this fall the boiler Konord KSC-G-30S for giving. He worked the winter without a single complaint. Quite quiet and cheap enough. which was especially surprised and pleased. I recommend!

In the store, we advised us a local manufacturer’s boiler. The Konord factory.

Bought this boiler to replace the old one in a private house with 110 squares. For the second winter without a single complaint. Automation does not go out, lit immediately. In the store and then gas workers showed how to properly run the boiler and adjust the temperature, but everything is clear and so.

The boiler is very simple and unpretentious, heated quickly, holds for a long time. I recommend!

Before that, there was a Neva-Transit, heaven and earth, although Neva is now more expensive, it was noisy, often turned off, warm the water poorly, to be honest that this would be the same, but no, firstly, even externally was done very carefully, And in the work it showed great, wonderful, very satisfied.

When water is opened, the gas is ignited automatically. The device does not require complex adjustment.

Small dimensions allow you to install a column even in a small kitchen. Model hoses are required for installation. The device is mounted on any wall and is connected to the usual exhaust ventilation of the house.

The size of this gas column is:

  • height. 590mm;
  • width. 340mm;
  • depth. 145mm.
  • Significantly cheaper than foreign analogues
  • design
  • Automatic ignition of flame
  • High efficiency in 1.5 years of use did not break and works like a new.

Gaz water heater (gas boiler as a heating boiler)

I purchased the flooring boiler of the manufacturer Konord, relatively inexpensive and I do not regret! Stopped his choice precisely on it t.to. according to the review am this is the best combination of price-quality. The boiler is already working for the second season, there are no complaints about his work. The boiler quickly heats the house, the gas consumption is minimal. The appearance of the boiler also causes only positive emotions. I am very pleased with the acquisition. I recommend.

Good afternoon! I bought a house in 2015 with an area of ​​100 square meters.m. Immediately became the question with heating t.to. Winter time came up. Friends who are engaged in heating advised to take 12 kWh. Konord t.to. In their opinion, this is the best price-quality ratio! At first glance, the boiler is made in a modern European style, also pleased the installed Italian gas automation of SIT. During the heating season, the boiler has never been faded (he worked as a Kalashnikov assault rifle) in the house there was always warmth even in severe frosts. For money, the maximum went to 3000 (in frosts)

Gas worker

To find a gas boiler, with an optimal price-quality ratio, you need to deal with the advantages and disadvantages of modern domestic heating devices. Floor gas boilers Conord positive reviews that can be found more and more often on various thematic forums. Let’s look at the lineup, technical characteristics, device, types of automation (gas.regional devices) using instructions for use.

Lineup and description of Konord boilers

Floor gas boilers Konord are produced by a capacity of 8 to 30 kW. They are like single-circuit: KSC-G-8, KSC-G-10, KSC-G-12, KSC-G-16, KSC-G-20, KSC-G-25, KSC-G-30; so Idvuh-contour : KSC-GV-10, KSC-GV-12, KSC-GV-16, KSC-GV-20, KSC-GV-25, KSC-GV-30.

Single.circuit devices can only be used for heating rooms with an orientation area from 30 to 300 m2. Double.circuit gas boilers of Konord can be used for water heating and receiving hot water supply (DHW).

If you plan to use a double.circuit boiler for the full use of the DHW contour, you need to buy a caonord boiler with a power indicator of 16 kW and above. In this case, he will produce from 8.5 liters of hot household water per minute.

It makes no sense to buy, for example, a double-circuit boiler KSC-GV-10 with a capacity of 10 kW. He will certainly not give you a good amount of hot water. Boilers can be used both in open and closed heating systems.

The boiler consists of a steel furnace with a thickness of 3 mm, (the first boilers walked 5 mm thick) of the case, a water shirt, smoke pipes with turbulizers built into them to increase the efficiency of the boiler, a gas.beam device (automation), a layer of thermal insulation from basalt cardboard, and a thermometer for control for control Behind the temperature of the coolant. In double.circuit models, a special coil for a water circuit is installed around smoke pipes.

The input and output of the coolant, as well as the coil for DHWs are on the back of the boiler housing. The diameter of the threads for connecting heating for all models of this brand is 2 inches or 50 mm. For the circuit DHW 1/2 or 15 mm. The diameter of the chimney for models with a capacity of 8 to 12 kW is 115 mm, for 16 kW and higher. 150 mm.

Due to the taxed turbulars and good thermal insulation, the KPD of the Konord boiler reaches 90%. These heating devices are capable of working at low gas pressure and are completely energy.dependent from electricity. The manufacturer announces the service life of the boiler for 15 years and the factory guarantee for 3 years, which is also indicated in the instructions for operation.

Automation for gas boilers Conord

On the floor boilers of this brand, automation of three types can be installed:

Our domestic automation is the simplest and inexpensive in price. It is installed not only on the boilers of the Konord factory, but also on other production models. Launch occurs manually by painting with a match or lighter.

In general, the automation is not particularly intricate and easy to use.

The Euro SIT automation consists of a sectional burner and POLIDORO tubes, as well as security systems: a smoker with a thermocouple, a temperature sensor, a SIT gas valve, a traction sensor and wires.In the case of attenuation of the smell burner, disconnecting gas or lack of traction in the chimney, automation instantly blocks the supply of gas to the burner. Ignition occurs by pressing the Piezoelent button. The temperature of the coolant is provided by the gas valve and set by the handle of the thermostat. and more ordinary users note SIT automation as durable and fairly safe, thanks to built.in automatic protection against gas leakage.

Honeywell automation from the American manufacturer has similar technical characteristics with a gas.burning device of the Eurosit type. The principle of operation is the same, differs mainly by the manufacturer and material of the execution of some elements. The ignition is carried out by clicking on the handle to the right of the thermostat and its subsequent turning to the position to the operator for the operation of the boiler in an economical mode.

Advantages of gas boilers Conord

The second group with a steel heat exchanger

Konord boiler with the design of a steel cylindrical heat exchanger made of cold-rolled metal, is offered by the plant in a single and double-circuit design. The service life is reduced compared to cast iron to 15 years. The designs use two automation options.

First option: SIT automation to Italian company known to its quality around the world. It is established in the vast majority of all manufactured boilers in the European Union, such famous devices as: Immergas, Fondital, Vaillant, and many others. SIT valve allows you to guarantee a stable set temperature.

In addition, automation controls sustainable operation with a reduced gas pressure in the city line. So the nominal value provides for operation with a pressure of 1.3 kPa, but a fall of up to 0.6 kPa is not a big problem and the gas boiler Konord continues sustainable work, despite the fact that this is 46% less than the necessary.

Single.circuit, with automatic SIT. only heating:

KSTS-G-8S Heat production = 8 kW KSC-G-G-10S Heat production = 10 kW KSC-G-2S Heat production = 12 kW KSC-G-16S Heat production = 16 kSt KSC-G-20S Heat production = 20 kSC-G-25S Heat production = 26 kW KSC-G-30S Heat production = 30 kW KSC-G-40S Heat production = 40 kSC-G-50S heat production = 50 kW

Single.circuit, with thermal hydraulic automation

The second option is more budgetary, equipped with automation of the type of agu-m of domestic development. AGU. Automatic gas.regional device, consists of nozzles and safety automation.Main manufacturers Mimax and Tagonrog. AGU Automation consists of:

  • thermal attewer;
  • Sellid with thermo. bimetallic plate;
  • adjusting screw with a lever;
  • gas valve;
  • Block Crane;
  • connecting parts.
  • Check the thrust, push the damper, howl a smell.
  • Click the gas valve, make a wick. Fix and do not release the button until the bimetallic plate heats up.
  • Continuing to hold the button, we follow the lever. He will crawl to the inscription “on the button”, we need to wait for the moment when it is fixed.
  • We free the gas valve from pressing and set the required temperature by means of the control handle.

Domestic automation makes it possible to buy a caonord boiler a little cheaper. In contrast to European analogues, it has the simplest design. It is energy.dependent. it is not required to power from the electric network. The launch process is carried out by manual method by roding with matches or lighter. By the way, thermal hydraulic automation of the AGU-Sm type is widely used in gas boilers

Such automation according to customer reviews, completely unpretentious, anapol boiler Konord equipped with it, is not “capricious”. In addition, it is not difficult to find spare parts in the market even far from city centers. also do not cause complaints, for example, one of the often in demand. the bimetallic plate is found everywhere not more than 100.

many, liters, water, boiler, conord

KSTs-G-10N Heat production = 10 kW KSTs-G-2N heat production = 12 kSts-g-20n heat production = 20 kW KSC-G-25N Heat production = 25 kSt KSC-G-30N Heat production = 30 kWs = 30 kW

Double.circuit with DHW, and adjusting automation SIT

The floor gas boiler Konord in case of equipping with two contours, copes with the task of heating structures and at the same time is able to prepare hot water used in the economic needs of households. The design uses the proven modulation function. The performance of the burner using modulation significantly increases the effectiveness of hot water supply.

KSTs-GV-8S Heat production = 8 kW kSC-GV-10s heat production = 10 kSts-gv-12s heat production = 12 kW kSC-GV-16S heat production = 16 kS-gv-20s heat production = 20 kW KSC-GV-25S Heat production = 25 kW KSC-GV-30s heat production = 30 kW

What is a bimetal plate

An element that has the ability to deform (bend) in one direction under the influence of elevated temperature is called a bimetallic plate. By name, you can guess that there are two metal in the plate. Each of them has its own value of the temperature expansion coefficient. As a result, when heated by such a plate, one component expands to a certain value, and the second to another.

This leads to a bend, the shape of which depends on the difference in temperature coefficients. The deformation rate is directly proportional to the temperature change. When cooling the plate, it acquires its original position. The plate is a monolithic connection and can work for an arbitrarily long time.

Review: floor single-circuit gas boiler Konord KSC-G-12N-reliable and economical!

Advantages: inexpensive, it works properly, economical, 3 years warranty

Gas heating has its pros and cons of. On the one hand, living in the apartment, you do not need to bother with the boilers, to install them somewhere, periodically clean, light, etc. P. Waiting for when they turn on heat and all. But on the other hand, they do not always include it when you want. And you have to freeze without heating in the fall and spring, and sometimes vice versa, die from the heat. This is a huge plus of gas heating. when necessary, turn on, when you don’t need to turn off. We live in a private house, and we, in fact, do not have to choose: if you want warmth, put the boiler. So we set the Konord KSC-G-12N, when the previous one ordered to live long.

Some technical data: overall dimensions 412/342/786, weight about 40 kg. Designed for 120 square meters (we have 100, took with a small margin). The efficiency has been declared at least 90%, but how to check it? Gas consumption with nominal heat production indicates 1.35 cubic meters per hour. The boiler is steel, white, covered with heat.resistant powder enamel. All the “filling” is behind the door:

As you can see in the photo, the upper cover is not loosely. this is not a defect in the boiler, it is after a preventive examination and cleaning of the gallows (!) They put it wrong, we did not immediately notice, but we don’t want to disassemble, remove the pipe and redo it, we decided to leave it until the next time. This model of the boiler is single.circuit, we use a gas column to heat water. The boiler is energy.dependent, but we have heating with a circulation pump, t. e. When the electricity is turned off, the pump does not work, the boiler overheats and automatically turns off. Fortunately, this is rare. With primary ignition there is one inconvenience. you need to keep the button pressed for some time, the finger gets tired)

The instruction is one for several models, for me personally is not very clear, but still the boilers should be installed and served by specialists, or at least technically competent people, this is not about me:

The boiler does not, of course, have any useful and pleasant functions like a programmable inclusion at a certain time and the like as its more expensive brothers. But the manufacturer gave a guarantee for 3 years, and the promised service life is at least 15 years. Installed a boiler in the summer of 2010, 2 winters survived. It was not very warm at home only in the most severe 30-degree frosts. In general, so far everything is satisfied, only this spring, however, he began to smoke unexpectedly, I had to urgently clean (I repent, cleaned the first time, although it is necessary at least 1 time a year). It is more economical compared to the previous boiler, heating of a 2-storey building with an area of ​​100 square meters. m. It is consumed an average of 500 cubic meters per month (of course, in winter more, in the summer there is much less, but I got used to paying one year all year round, it’s more convenient for me). P.S. Unfortunately, you have to add a spoonful of tar to the previous positive impression. Today again suddenly began to smoke, 9 months have passed since the previous cleaning. So, when cleaning, experts, having removed one of the turbulars, found that in one place he burned out. Through incomplete 3 years of work.

General impression. Reliable and economical!

Gas water heating apparatus

The use of Italian automation SIT provides stability of a given temperature and work at low gas pressure.

I reduced our gas usage by 30% for hot water by doing these 3 easy things

The ability to install a circulation pump and the operation of AOGV in a closed heating system. The cylindrical heat exchanger is made of high.quality steel and withstands high pressure.

Simple installation without alteration of the heating system and replacement of the project. Complete coincidence of all annexing sizes for this model

ANTISTRUCTION OF THE DECHERS for supplying gas ½ “
Efficiency for outgoing gas fuel gases at least 85-90 %
Water working pressure in the apparatus 10020 kPa (1.00.2 kg/cm²) 0.12 (1.2)
Water temperature in the device 50-90 ° C
The internal size of the chimney Ø 112.6 mm
Nominal gas pressure 1274 PA (130 mm of water. Art.)
The composition of the outgoing gases: – not more than 119 mg/m³ of carbon monoxide co- no more than 240 mg/m³ of nitrogen oxide n o
Discharge behind the device – The smallest 5 pa. the largest 25 PA

The power is not included in the power consumed by the hot water circuit. All the parameters indicated in the table correspond to the work of the device with nominal heat production and the established thermal equilibrium.

The presented on the site are not a public offer and may differ at points of sale.

Product line

There are practically no wall.mounted boilers in the brand line, therefore, for the heating system of the house, consumers often purchase a gas.hub gas boiler, which can be equipped with additional options. Floor boilers are produced in four episodes. The manufacturer makes all boilers from durable quality steel. To increase the stability of the boiler, its surface is treated with heat.resistant powder, which protects the device from the action of high temperatures and loads.

Consumers who are interested in such a device as the gas boiler Conordication Instructions for which is attached to the manufacturer should analyze devices from the following series:

Series KSC-G-S

In this series you can find a good single.circuit boiler for heating, which is equipped with a functional gas supply regulator. Italian automation, which controls the process of the domestic boiler, guarantees its safety, reliability and efficiency in the heating system of the house or apartment. Devices from this series can be adapted for heating buildings with an area of ​​80 to 300 kV.m., But for this you need to choose the right boiler by power.

In order for the boilers to meet the requirements of the heating scheme, it is important to pay attention to other parameters. Thus, the working pressure of the devices from the KSC-G-S series is from 0.2 to 1.9 bar, the minimum heating temperature of the coolant is 60 degrees, and the maximum is 90 degrees

Series KSC-G-N

functional boilers can be purchased under the marking of KSC-G-N. They are equipped with a unique cylindrical heat exchanger, which is made of high.quality steel cold rollers. This decision allowed manufacturers to achieve the most effective indicators of work and provide the possibility of quick and uniform heating of the coolant circulating in the circuit. This series presents single.circuit models that can be used to heat houses with an area of ​​100 to 300 kV.m.

many, liters, water, boiler, conord

Due to increased reliability, KSC-G-N boilers can work in difficult conditions-they are designed for use in working pressure systems reaching 5 bar. To optimize the heating process on the boilers, excellent thermal hydraulic automation is installed. Since this series of products is more functional and universal,

Series KSC-GV-S

Inexpensive dual-circuit gas boiler Conord reviews about which you should definitely read before purchasing, can be found under the marking of KSC-GV-S. Models from this series are equipped with an additional contour to ensure hot water supply in the house. They work under the control of Italian automation SIT and are designed for heating houses with an area of ​​120 to 300 square meters.m.

Having studied for the gas boiler Condor, the reviews of the double.circuit unit are acquired, the owner solves two problems at once and equips his house with a device, which will help warm the rooms and give the necessary supply of hot water for household needs. The boilers are quite universal. they can be used in almost any contours.

Series KSC-GV-N

Among the products combined under the marking of the KSC-GV-N, you can choose a good double-circuit gas boiler Conord Technical characteristics of which are represented by a unique form of the smoke collection and the presence of thermal hydraulic automation.

KSC-GV-N boilers have a unique emergency protection system.

These models are the most safe and reliable. They are equipped with detectors who stop the gas supply at the threat of an explosion. Also, the boiler can independently stabilize the process of work when the short.term reverse traction is detected. The power of the devices in this series is from 12 to 30 kW. How to choose a gas boiler in the apartment can be read here.

The Konord company earned a good and strong reputation in the market through the production of reliable heating equipment. Among consumers, gas boilers of Conord reviews of which are mostly positive, are in stable high demand.

In the manufacturer, you can choose a boiler for almost any heating system. because the power of various models is from 8 to 30 kW. Correctly selecting the boiler among the assortment of brand products, the owner can make it a basic element of the heating system of the apartment, suburban cottage or a large private mansion.

Gas boilers of Konord

The Konord plant was founded in it in 1947, and since then has produced thermal equipment of various types.

During its work, considerable technological experience was accumulated, the features and disadvantages of imported models of gas boilers were analyzed, the necessary conclusions were made. Today, Konord produces several series of gas boilers, which are the optimal solution for the user.

Climate features, the state of communications, the possibility of interruptions with the supply of certain resources are taken into account.

The company relied on the release of units as independent of external conditions that can perform tasks despite the situation.

Energy.dependent equipment in conditions. a big plus, it gives a guarantee of maintenance of heating during a sudden disconnection of the voltage in the network. This approach is reasonable and highly appreciated by specialists and ordinary users.

All gas boilers of Konord have a floor structure. This feature allowed the manufacturer not to save too much on the dimensions and strength of the nodes and parts.

External Gas Boilers. Video 1. Unboxing and Preperation


About the author

| Denial of responsibility | Contacts |RSS