How to clean the Ariston HotPoint washing machine

Self.cleaning function of the washing machine Hotpoint Ariston

I teach household appliances repair masters! Salary from 80,000 !

Any washing machine (SMA) Ariston is equipped with many functions that do not immediately understand. Lucky if there are not only graphic designations on the control panel, but also the names of programs and modes. this simplifies the use of the device. It is more difficult to master the language of graphics. some icons are incomprehensible, you have to decipher them to get acquainted with all the possibilities for see. We will find out what are the washing modes in the Ariston models and how they were designated by the manufacturer.

The main modes of Ariston

They are most often used. But do not forget that the capabilities of the lubricants are not limited to the main modes. besides them, there are also a lot of functions to adjust the conditions of the process.

  • Strongly contaminated things are erased in water heated to 90 ° C. Pushing at maximum revolutions.
  • For color things from x/b and linen. Heating. 60 ° C.
  • For not very dirty things. You can wash delicate fabrics
  • 165
  • 140
  • 90

Complex cleaning

Complex cleaning of the machine includes a number of measures aimed at cleaning all components and parts of the unit, and not only some individual. The easiest way to keep the machine is clean is to clean the washing machine from above.

During operation, spots from bleach, water and washing powder inevitably appear on its surface. Clean such contaminants conveniently with a damp cloth. It will be better if you add a detergent for dishes to the water.

The washing drum must be regularly cleaned from the inside, especially if there is an unpleasant odor. The car is filled with water, pouring into the drum pre.cleaner or bleach. The washing cycle is turned on for a short time so that the product dissolves in water and then turns off, leaving the car for an hour. This will help remove dirt, mold and unpleasant odor.

It is recommended to clean the washing machine at least once every three months, otherwise due to accumulated debris and lime deposits, the drain system will stop working and the technique will fail. Filters and hoses cleaning. the procedure is no less important than cleaning the heater or drum.

The filter is located behind the panel, and there is also an emergency hose. Water should be drained from it and then, you can dismantle the filter. The main thing is to carefully clean the impeller from debris and plaque of dirt, and then rinse. After washing, the filter is installed in the same place.

When cleaning the machine, do not forget about the heater. Ten. It should also be periodically cleaned from scale, otherwise it will begin to overheat and eventually burn. The heating element can be removed and cleaned manually. The main thing is not to scratch and not damage its body.

Signs of clogging

Иногда о необходимости провести очистку можно узнать по определённым признакам. If available, it is necessary to take the necessary measures. It is important to pay attention to the following:

  • If the washed things acquire an unpleasant odor. Typically, the cause of this is a strong clogging of the drain filter.
  • The rate of water drain is significantly slowed down.
  • Built.in diagnostics issues an appropriate error code.

In the presence of these signs, cleaning the filter should be done as soon as possible. Otherwise, the risk of car breakdown increases.

How to start self.cleaning of Ariston washing machine

During operation, Ariston, like other models, is clogged with garbage, getting inside from the water pipe, and a crocheted, settling on the internal parts of the Ariston unit and its water heating element.

Actions are performed in the following sequence:

  • The underwear inside the drum is extracted;
  • a powder receiver opens;
  • A latch is pressed in the center, the tray for detergents is extracted. This measure will improve powder access to the Ariston car;
  • Kalgon is poured into the hole.

We activate the cleaning process, for which we press the “fast washing” and “re.rinse” keys. We monitor the symbols on the screen. First of all, the letters AUE appear, after that. UEO, in conclusion. EOC.

You will hear a squeak in the Ariston washing machine, the hatch will be broken down. Water supply will begin in the drum. This means that the launch of the Ariston car was successfully carried out, the function earned.

Using this program, the Ariston technique cleanses the scale from the heater, cleans the hoses from probable clogs, disinfects the drum, eliminates the mold inside. If such measures are performed regularly, Ariston car will last you a long period.

Repair of the washing machine HotPoint-Ariston VMSF 6013 b

The network of off-site repair shops of household appliances “Rembetteh” performs the repair of the washing machines HotPoint-Ariston VMSF 6013 B at the house of the customer. The brigades of our specialists work in all areas and in most cities of the neighbor, even living in the region, you do not have to overpay for the distance from the Moscow Ring Road when calling the master. Our specialist will come to you at any convenient time from 8 to 22 hours and, if necessary, within a day after calling.

Any technique over time requires cleaning and prevention. The self.cleaning mode of the washing machine is a special function that allows you to clean the unit from plaque of fat, dirt and other contaminants.

The “Self.cleaning” mode present in most modern washing machines was developed by the manufacturer specifically for removal, which remain in the drum and tank of insoluble substances.

Important: the drum must be cleaned at least once a year. If washing is carried out more often, then cleaning is required more often. Then the quality of washing will correspond to the norm, and the car will remain in working condition for many years.

To clean the machine using the self.cleaning function, it is only necessary to start this program and wait until it is executed, it should be remembered that it cannot cope with a scale, but will only remove mold and fat from the inner surfaces of the washer.

To use the function of self.cleaning, you need:

  • Remove from the drum if they lie there;
  • Close the loading hatch and press the button on the “Food” panel;
  • If the model does not have a clear “self.cleaning” mode, then press the “” button and hold it for at least three seconds. The inscription “TEI” should appear on the display. that is, the drum self.cleaning mode will turn on;

Upon completion of cleaning, you should turn off the machine from the network and open the loading hatch for ventilation and drying.

The independent cleaning program cleans the machine from the inside and saves it from the particles of the pile, wool and extraneous objects. Since the regime provides for the operation of the unit at a temperature of 60 degrees, at a speed of up to one hundred and fifty revolutions per minute, its owner practically does not have to use purchased or folk cleaning tools.

Self.cleaning from the point of view of the unit is as follows:

  • Prewash;
  • The main washing (temperature is already 60 degrees and rotation speed of 150 rpm;
  • Double rinse and squeeze.

Experts recommend making such prevention at least once a month. Important: manufacturers of most washing machines do not recommend the use of chemicals when cleaning the unit, in particular means for removing lime plaque and washing powders. An excessive amount of foam formed in cases of their use can lead to a washing leakage.

Many cars have a special button, pressing which the self.cleaning process is immediately activated. The ban on the use of a self.cleaning program, together with things in the drum, is due to the fact that when performing this program, the machine accelerates to high speeds, the drum makes uneven and sharp movements. If there is linen in it, and it and the machine itself can suffer.

How to enable self.cleaning of a washing machine Hotpoint Ariston

The Drum of the Washing Machine needs an annual procedure. If the unit works often, the automatic cleaning is activated several times. After that, the quality of the process meets norm, the machine retains performance for a long time.

To clean the unit that has the function of automatic cleaning, you should enable this program and wait for its implementation. It must be remembered that you will not delete the scale of this procedure.

To use the auto.cleaning function, a number of actions should be performed:

  • extract things from the drum in it;
  • Close the loading door, activate the “Nutrition” button;
  • If your washing equipment does not have a special auto.cleaning function, press the key that shows an asterisk, hold it for up to three seconds. The display will be displayed by the inscription “TEI”, meaning that the process of cleaning the drum has begun;
  • After such an inscription appears, click the Start button to activate the mode. At the same time, a preliminary washing diode lights up;
  • The washing device cleans the drum for an hour and a half.

Lubricated inside, getting rid of villi, wool and fine garbage. The unit works in a water heating mode of up to sixty degrees, performs one and a half thousand rotations per minute, so that purchased or improvised cleaning products will not be required.

From the point of view of work, the air treatment process looks like this:

  • First of all, preliminary washing is performed;
  • the main process is carried out;
  • The main and additional rinse with the spin begins.

Companies engaged in the production of washing machines are not advised to use chemical compounds and especially drug removal and washing powders when auto cleaning of the system. The fact is that their use is associated with the formation of a large amount of foam capable of causing machine leaks.

What means we will use?

Before turning on self.cleaning, you should stock up on a suitable cleaning agent. Ordinary powder is not suitable. a special composition is needed, which is bought separately. It is better not to experiment with stamps, but to choose already proven cleaners.

  • A liquid agent produced in Japan and capable of cope with soapy raid, fungus, scum and other dirt. It is implemented in bottles of 550 ml, which is enough for a single cleaning of the car with a capacity of up to 9 kg. The cost varies between 6-6.3 dollars.
  • Japanese tablets with recognized efficiency. Remove any pollution and attract relatively low price. A pack with 5 tablets costs about 2 dollars.
  • Dutch powder against mold for any type of washing. Sold in packs of 0.162 liters for 10 dollars.

Before use, you must familiarize yourself with the instructions on the packaging and strictly follow the given dosages. Otherwise, the desired effect will not be achieved, and an expensive tool will spend in vain.

In an effort to save, some housewives begin to “cunning” and look for an alternative to expensive powder among improvised means. Tips and recommendations are on the Internet, however, not all of the listed “analogues” can be considered effective and safe.

So, most often on the forums, when turning on the self-cleaning mode, they use whitewash, various acids and a Coca-Cola drink as a detergent. Unfortunately, none of the listed liquids will save, on the contrary, will damage the machine and entail additional expenses.

  • White. It is rightfully considered a powerful and effective cleaner and, thanks to concentrated chlorine in the composition, will quickly wash dirt and scale from the “insides” of the automatic machine. However, there is a significant “but”. the substance greatly corrodes the rubber parts, which will lead to breakdowns and leaks.
  • Acids. Like the whiteness, they will cause significant damage to rubber cuffs and gaskets of the machine. Plus, metal components will also suffer: the drum will darken, shaft and heating. Some users burned with liquid and drain hose.
  • Cola. Famous for purifying qualities, but the existing concentration of active substances is not enough to completely clean the machine. It will take about 15-20 liters, which is many times more expensive than special equipment.

Read more: Bonsai from Sakura how to grow from the seeds of Japanese sakura bonsai at home in what ground it is better to plant a tree how to care

It makes no sense to save on a machine gun cleaning. Aggressive and unverified chemistry will do more harm than benefits. It is highly likely that budget experiments will bring to the point that you will have to purchase a new washing machine.

How to start self.cleaning of Ariston washing machine

During operation, Ariston, like other models, is clogged with garbage, getting inside from the water pipe, and a crocheted, settling on the internal parts of the Ariston unit and its water heating element.

Actions are performed in the following sequence:

  • The underwear inside the drum is extracted;
  • a powder receiver opens;
  • A latch is pressed in the center, the tray for detergents is extracted. This measure will improve powder access to the Ariston car;
  • Kalgon is poured into the hole.

We activate the cleaning process, for which we press the “fast washing” and “re.rinse” keys. We monitor the symbols on the screen. First of all, the letters AUE appear, after that. UEO, in conclusion. EOC.

You will hear a squeak in the Ariston washing machine, the hatch will be broken down. Water supply will begin in the drum. This means that the launch of the Ariston car was successfully carried out, the function earned.

Using this program, the Ariston technique cleanses the scale from the heater, cleans the hoses from probable clogs, disinfects the drum, eliminates the mold inside. If such measures are performed regularly, Ariston car will last you a long period.

Self.cleaning function of the washing machine Hotpoint Ariston

I teach household appliances repair masters! Salary from 80,000 !

Any washing machine (SMA) Ariston is equipped with many functions that do not immediately understand. Lucky if there are not only graphic designations on the control panel, but also the names of programs and modes. this simplifies the use of the device. It is more difficult to master the language of graphics. some icons are incomprehensible, you have to decipher them to get acquainted with all the possibilities for see. We will find out what are the washing modes in the Ariston models and how they were designated by the manufacturer.

The main modes of Ariston

They are most often used. But do not forget that the capabilities of the lubricants are not limited to the main modes. besides them, there are also a lot of functions to adjust the conditions of the process.

  • Strongly contaminated things are erased in water heated to 90 ° C. Pushing at maximum revolutions.
  • For color things from x/b and linen. Heating. 60 ° C.
  • For not very dirty things. You can wash delicate fabrics
  • 165
  • 140
  • 90

Hotpoint Ariston Aqualtis 107KG Washer Dryer. Wash&Dry 45 Minutes (Complete Cycle)

The use of self.cleaning function

Any technique over time requires cleaning and prevention. The self.cleaning mode of the washing machine is a special function that allows you to clean the unit from plaque of fat, dirt and other contaminants.

The “Self.cleaning” mode present in most modern washing machines was developed by the manufacturer specifically for removal, which remain in the drum and tank of insoluble substances.

Important: the drum must be cleaned at least once a year. If washing is carried out more often, then cleaning is required more often. Then the quality of washing will correspond to the norm, and the car will remain in working condition for many years.

To clean the machine using the self.cleaning function, it is only necessary to start this program and wait until it is executed, it should be remembered that it cannot cope with a scale, but will only remove mold and fat from the inner surfaces of the washer.

To use the function of self.cleaning, you need:

  • Remove from the drum if they lie there;
  • Close the loading hatch and press the button on the “Food” panel;
  • If the model does not have a clear “self.cleaning” mode, then press the “” button and hold it for at least three seconds. The inscription “TEI” should appear on the display. that is, the drum self.cleaning mode will turn on;

Upon completion of cleaning, you should turn off the machine from the network and open the loading hatch for ventilation and drying.

The independent cleaning program cleans the machine from the inside and saves it from the particles of the pile, wool and extraneous objects. Since the regime provides for the operation of the unit at a temperature of 60 degrees, at a speed of up to one hundred and fifty revolutions per minute, its owner practically does not have to use purchased or folk cleaning tools.

Self.cleaning from the point of view of the unit is as follows:

  • Prewash;
  • The main washing (temperature is already 60 degrees and rotation speed of 150 rpm;
  • Double rinse and squeeze.

Experts recommend making such prevention at least once a month. Important: manufacturers of most washing machines do not recommend the use of chemicals when cleaning the unit, in particular means for removing lime plaque and washing powders. An excessive amount of foam formed in cases of their use can lead to a washing leakage.

Many cars have a special button, pressing which the self.cleaning process is immediately activated. The ban on the use of a self.cleaning program, together with things in the drum, is due to the fact that when performing this program, the machine accelerates to high speeds, the drum makes uneven and sharp movements. If there is linen in it, and it and the machine itself can suffer.

Special programs

These programs allow you to choose for each thing. whether it be curtains from organza, cashmere coat or lace underwear, the best washing option.

Signs of clogging

Иногда о необходимости провести очистку можно узнать по определённым признакам. If available, it is necessary to take the necessary measures. It is important to pay attention to the following:

  • If the washed things acquire an unpleasant odor. Typically, the cause of this is a strong clogging of the drain filter.
  • The rate of water drain is significantly slowed down.
  • Built.in diagnostics issues an appropriate error code.

In the presence of these signs, cleaning the filter should be done as soon as possible. Otherwise, the risk of car breakdown increases.

What other functions?

Any washing machine from the Ariston lineup. Ariston AL88x, Ariston AVTF 104 or another, is equipped not only with the main, but also with additional functions. The user can enable these modes:

  • Additional rinse. For more thoroughly ragging things. The cycle will increase by about half an hour.
  • Individual program. For entering into memory of any mode you like.
  • Supply. ordinary and delicate. Respectively 1000 and 800 revolutions. Time. about 15 minutes.
  • Drain. This option will come in handy if the cycle is finished, but cm does not drain water.

Error codes in Ariston washing machines

Even if all the recommendations for operation and knowledge of all the rules prescribed in the instructions, it is impossible to predict what the service of the washing unit will be. The manufacturer Ariston has greatly simplified the life of its consumers and decided to inform them about possible mistakes. If problems arise in the operation of a different mechanism, the code is displayed on the display. By deciphering it with the help of instructions, you can learn about the reasons for the breakdown and even try to solve the problem on your own. The most common mistakes are:

  • F1. problems with a motor chain
  • F2. malfunction in the tacracker
  • F3. problems with the temperature sensor of the Ariston washing machine
  • F4. error associated with the chain of press start
  • F5. no drain occurs
  • F6. breakdown of buttons on the control panel
  • F7. problems with the Ten chain
  • F8. heating chain breakdown
  • F9. error in the firmware
  • F10. malfunction in the fluid level sensor
  • F11. ARISTON drain pump does not work
  • F12. the control module is not related to the indication
  • F13. problems with the drying temperature sensor
  • F14. malfunctions with the heating dryer
  • F15. problem with the drying heating chain
  • F16. Damage to the drum
  • F17. door mistake
  • H20. problems with a set of water

The final part of the instructions for the Ariston washing machine

Observing all the rules and recommendations regarding the operation of the Ariston washing machine, you can ensure the durable and reliable operation of the unit. The advantages of the washing device are its simplicity in operation, an acceptable price, the ability to work with different products and provide an accelerated, silent, delicate or intensive washing process.

In case of malfunctions, the reason can be easily determined by the code that appears on the display, the decoding of which is in the instructions for the Ariston washing machine. often the causes of malfunctions are incorrect handling of the unit, numerous malfunctions in the supply of electricity or non.compliance with the required standards when installing the machine.

Why is it necessary to clean the washing drum?

The drum, dealing with dirty linen, is polluted over time. In washing rooms without automatic cleaning, you have to carry it out on your own. To do this, a bleach, vinegar, citric acid are poured into the machine, soda or other cleaning and disinfectants are filled up.

Thanks to cleaning products, the drum gets rid of dirt, bacteria, mold, scale, unpleasant odor and soap sediments. If you do not clean the “gathe” in time, the put.off smell will come from it, it will also smell of the painful things.

If you neglect the cleanliness of the SMA, it will fail premature. If you bought a model with ECO, you do not have to use special cleaning products and run the washing machine, the device itself will take care of its cleanliness.

If the washing machine does not provide for the self.cleaning mode of the drum

It is necessary to familiarize yourself with the list of detergents recommended by the manufacturer for cleaning the drum specified in the instructions for the operation of your washing machine. In the most extreme case, you can use “folk remedies”. But, of course, it is worth remembering that they can be used rarely and with particular caution.

How to clean the drum of washing machine with citric acid

Pour 100-200 g of citric acid (depending on the load of your model) in the powder compartment and turn on the washing at high temperature and at high speeds.

How to clean the drum of a washing machine vinegar

Pour 250 ml of 9% vinegar into a powder compartment for powder. Activate the washing function at high temperature. After a mixture of water and vinegar is heated, suspend the washing for 60 minutes., then resume the process and bring it to the end. After the end of the process, keep the hatch open and let the vinegar smell get out of the machine.

How to clean the drum of a washing machine with soda

Mix 200 g of soda and 200 g of water (in a proportion of one to one). Apply the resulting gruel to the drum, the glass of the hatch cover from the inside, as well as on the rubber cuff of the hatch. Leave the mixture in the typewriter for half an hour, and then remove it with a damp sponge. Then run the rinse mode in the typewriter.

How to clean the drum of a washing machine chlorine

Pour 250 ml of a 0.5%chlorine solution into a powder department for powder. Turn on washing at the highest temperature and high speeds.

If you have doubts that in the course of cleaning the drum on the internal details of the washing machine the product you use remained, then the washing mode should be launched (withstanding the temporary interval specified in the instructions for your LG washing machine). Otherwise, this can lead to corruption of linen in the future.

How to clean the drum of a washing machine with powder

  • Remove all the linen from the drum
  • Select the cotton program and set the highest temperature
  • Add a small amount of powder detergent to an empty drum to remove the remaining contaminants

From time to time, at the end of the cycle, an icon may appear on the display. it notifies that it is recommended to clean the drum.

At the end of cleaning the drum, the badge disappears.

Washing machine service recommendations

ARISTON drain filter Margarita 2000 or another model should be cleaned at least once every two to four months. If the equipment is used daily, for example, in a family with several children, then the device maintenance must be carried out every month.

The regularity of cleaning the drain filter is affected by the type of fabrics that are erased in the machine. So, products from pile and wool are more often erased in winter and autumn. These materials contain villi, which quickly and seriously clog the drain filter, which means that it should be cleaned more often.

When washing things from the pen and fluff, for example, pillows or outerwear, a huge amount of garbage is released, so cleaning must be performed immediately at the end of the program.

Zasor factors and its types

There are two types of blockage:

Most often, a mechanical blockage appears after small objects from outside enters the filter. Therefore, before the start of each washing, carefully inspect your clothes and the drum itself for the presence of such things:

The filter blockage also occurs naturally. After each washing, villi, wool, fluff or particles of synthetic winterizer accumulate in the plum.

After a strong blockage, the water passes poorly through the drain, which can cause a software failure of the washing machine, and the device will refuse to rinse or squeeze out. As a result, the car can completely fail.

Failure of heating element

Symptoms are obvious. water does not heat up. Many Ariston washing machines in this case may simply not turn on or highlight an error on the display. With such a breakdown, sometimes the machine is able to “beat the current” due to the broken insulation of the heater. The most common cause of breakdown is hard water.

A similar problem would not have arisen if the car was cleaned in a timely manner from scale. Repair consists in replacing the heating element with a new. The process cannot be called difficult and replacement is easily made with your own hands without involving paid specialists. In more detail.

Again, the back wall opens by removing the mounting screws.

Directly behind it, under the tank of the washing machine, there are large contacts and in the middle the fastener element of this heater itself.

Contacts are disconnected and a screw is unscrewed. Then, gently swinging movements, we pull the heater outward.

clean, ariston, hotpoint, washing, machine

Accordingly, a new one is installed in its place, it is already fixed with a screw, the contacts are installed in its place. Close the lid of the washing machine.

How To Clean The Filter on a Hotpoint Washing Machine

Ready. We connect the machine and check the work with the new heater.

Wear or destruction of the bearing

It is clear that such a malfunction is more complicated for independent correction, but nothing more. Just replacing bearings still requires certain skills. First of all, it is impossible not to notice that when there are signs of signs of problems with bearings, you should not drag time and “finish” the machine while it works.

A timely not solved problem can lead to a situation where the repair is impossible or simply unprofitable. Symptom of wear of the bearing. a hum or even a knock with spin and washing, the backlash in the drum is likely. The difficulty of repair is that the car will have to disassemble almost completely.

Additional problems are created by the design of the tank of most washing machines Ariston. He is soldered from two halves and unprofitable. As well as to extract old worn bearings may need special devices.

Although the process of independent replacement of bearings is quite cognitive. The unlimited tank is quite easily transformed into a metal sawn by a hacksaw and then into a silicone sealant glued with silicone sealant and tightened by bolts.

To talk about what devices for removing bearings are able to come up with a head-to-hand and hand-to-hand person, even somehow pointless. In extreme cases, to remove the bearing on the extracted tank, it is quite possible to contact the nearest car service.

How To Clean The Filter on a Hotpoint Washing Machine

In any case, it will be cheaper than “asking” the service center for serving washing machines. over, it is not a fact that the service even knows how to carry out such repairs.

If the part cannot be obtained

In some cases, to extract a clogged node from the body of the Ariston Artf 1047 washing machine or another model does not work. The reasons can be different: the handle does not turn or the filter is stuck in a landing place and is not removed outside. Such consequences may neglect the rules of operation of the Ariston washing machine and the lack of regular or periodic cleaning.

If the part cannot be unscrewed, this is explained by the hit of a foreign object (for example, bones from a bra or button) or the formation of a scale between the seal and carvings. You can unscrew the knot using pliers. You need to act with great care so as not to break the handle or the filter itself.

If the use of pliers did not help, you need to remove the pump and only then to unscrew and clean the filter.

On different models of Ariston washing machines, you should remove the rear or front panel of the case, then disconnect the wires, unclench the fixing clamps that attach the drain pipe and the hose to the pump snail, and then remove the pump connected to the snail. Cleaning the drain filter is easier through the hole for the drain pipe. You can also unclench the latches or twist the screws, disconnect the pump from the snail, and then clean the filter through the pump opening. After processing, it should easily get out.

The actions to clean the drain filter through the pump are quite complicated, so if there is no certainty that the procedure will be correctly completed, it is better to contact professionals.

Посудомоечная машина Hotpoint-Ariston, часть 2

In the event that all the actions described above did not bring the results and it was not possible to get the part, this means that somewhere an error was made or the Ariston washing machine has some kind of peculiarity. No need to break the device, the correct solution will be to seek help from professionals.

If after cleaning the drain filter leaks

After the part is cleaned, you will need to check the washing machine for detecting leaks. It should be borne in mind that it may not appear immediately, but only after performing several washes.

There are a number of reasons why the washing machine flows.

  • The first and main reason is the incorrectly performed installation of the drain filter. He could be screwed loose or crookedly. The part should be screwed without distortions to exclude random shutters on the thread. In this case, the element should be tightened tightly, but very carefully. It is worth remembering that with strong pressure when tightening the lid, you can damage the thread on the plastic part. To eliminate the leak, it is enough to twist and re.install the knot in the same place, correcting the distortion and fixed tightly.
  • Secondly, the integrity of the rubber gasket could be violated, which provides the density of the drain filter installation. She could crack during operation or be damaged with careless removal of the part, as well as during inaccurate cleaning with cutting tools. To eliminate such a breakdown, it will be necessary to replace sealing gum, if they are on sale or install a new drain filter.
  • The third cause of the filter leak is its damage or a thread defect. This could happen when the part was incorrectly removed or with excessive tightening the lid. As a result, the contact of the drain elements becomes weaker, and therefore the leak appears. To eliminate the breakdown, you will need to replace one or several details at once, for example, a filter and a snail. If there is no certainty that it will turn out to perform all actions correctly, you should seek help from professionals.

About the author

| Denial of responsibility | Contacts |RSS