How to fix a torn hose from the Kerher vacuum cleaner

How to disassemble the telescopic pipe of the Karcher vacuum cleaner

Dry cleaning is a convenient and reliable way to maintain cleanliness in a living room. A variety of models allows you to choose a vacuum cleaner depending on preferences regarding the manufacturer, functions and financial capabilities. The breakdown of the air intake sleeve is indignant for expensive household appliances. How to disassemble the hose from the vacuum cleaner in order to restore and return it to work, we analyze below.

Structurally, the vacuum assembly can be divided into two parts: a stationary block and a movable working element. The block contains:

How a hose is arranged

The duration of the vacuum cleaner and ease of use depends on the operational characteristics of the sleeve. The length of the plastic spiral varies, depending on the model, from 1.5 to 2 meters. The absorption power depends on the diameter of the sleeve: inversely proportional dependence. All working elements have two identical structural elements: an adapter, to fix the elongating rod, and the castle, to connect with the unit. The functional features of the hose depend on what material it is made and the purpose of the vacuum cleaner.

  • Universal models:
  • from thin.walled frameless corrugation;
  • hard frameless plastic;
  • flexible corrugation with a metal braid.
  • For washing vacuum cleaners.

Ribbed tubes of detergents are additionally equipped with rubber tubes for water supply.

Features of the design of the vacuum cleaner hose

Before you start the restoration of this spoiled element, you should understand its design. The hoses of most modern vacuum cleaners are made of polypropylene material, and they are a corrugated flexible pipe with good elastic data. Thanks to these qualities, the hose can be slightly stretched/compressed. Its length ranges from 1.5 meters.

The ends of the sleeves on both sides are equipped with plastic fittings, one of which is put on the executive holder for the working nozzle. Another pipe is nothing more than a coupling inserted into the body of the apparatus.

For reference. Basically, the integrity of the corrugation is disturbed near the place of its connection with plastic elements. Even the smallest defect is enough for the vacuum cleaner with an unchanged power to start poorly pulling. How much power do not increase, the thrust will still remain weak.

The causes of defects

The hose of household vacuum cleaner can be damaged for a number of reasons:

  • excessive excesses and twisting when using and careless storage;
  • strong stretching during cleaning;
  • the habit of pulling the device behind you or transfer it by the hose from place to place;
  • contact of corrugations with sharp edges of objects;
  • decrease in elasticity if the device was stored for a long time in a low.temperature room.

The hose can break or fade for natural reasons: the shelf life of the material came out and simply worn out during operation.

Structural features of the hose

Most corrugated hoses of cleaning equipment are a pipe made on the basis of elastic material (polypropylene).

Repair a split ducted vacuum hose. Aussie Vac Melbourne Sydney

The tube usually has a length of not more than 1.5 meters. Thanks to the corrugated surface, the accessory has the ability to stretch within small limits.

One end of the elastic pipeline ends with a short segment of a hard plastic tube. This part is a link of the connection with an extension bar or directly with the working nozzle of the vacuum cleaner.

The opposite end part of the hose is equipped with a short pipe-beam, through which a locking connection is formed with the vacuum cleaner module. This pipe-zoom is actually a continuation of the corrugated tube.

The practice of using vacuum cleaners notes that it is on the joint lines of an elastic corrugation with terminal stiff elements that the rupture most often occurs, and the breakdown of the hose is considered one of the common breakdowns of the vacuum cleaner.

Meanwhile, the formation of even a small impulse of the hose leads to a significant loss of the effectiveness of cleaning equipment.

The causes of defects

Cracks, breaks, punctures on the body of the vacuum cleaner hose can appear for various reasons. However, the main reason, of course, should be considered incorrect handling of this detail.

What actions of the user lead to the appearance of defects on the body of a corrugated tube?

  • Towing the vacuum cleaner from place to place through the hose.
  • The bend of the tube under unacceptable angles during cleaning.
  • Inaccurate use in conditions of cleaning objects with sharp edges.
  • Storage is not according to the instructions.

The natural reason for the formation of defects should also be considered the outflow of the service life of the product, wear, low quality of the material.

Towing the vacuum cleaner from place to place by pulling the device for a working hose. practice is quite common.

At the same time, many owners of vacuum cleaners make such “tricks” completely unaware of the future consequences. Meanwhile, the instructions for any vacuum cleaner clearly reads. this cannot be done!

The bend of the pipeline at an unacceptable angle may take place when the owner of the vacuum cleaner in the heat of cleaning seeks to get zones theoretically inaccessible in operational and technical parameters of cleaning equipment.

Several times such attempts may end quite well. However, the strength of the material in relation to unacceptable loads is not limitless. And therefore, at the most inopportune moment, the pipeline will simply burst in the place where there was an unacceptable outrage.

Carrying out harvesting work can be performed in different conditions. For example, in conditions of cleaning furniture, the frame of which has metal parts with sharp faces. If in such conditions to manipulate the hose inadvertently, there are all the prerequisites for the appearance of cuts on the body of the corrugation.

Finally, the rules for storing harvesting equipment specifically painted in the instructions of the vacuum cleaner cannot be violated, since violation here is one of the reasons for the malfunction of the vacuum cleaner hose.

So, storage of the device together with accessories, or separately accessories, at a temperature below the recommended leads to a decrease in the strength of the material of the corrugated tube.

Sudden temperature changes, loaded state, unacceptable excesses are also critical for the material of the hose.

How to repair a hose from a vacuum cleaner?

Depending on the place and nature of the damage, there are several ways to save your hose from the vacuum cleaner so as not to spend an unplanned purchase of expensive household appliances.

Repair using a camera from a bicycle wheel

If the hose was damaged in the middle, then it can be repaired using a conventional bicycle chamber. To do this, you need to perform such a sequence of actions:

  • Assess the degree of damage and cut off the length of the chamber you need, having previously checked the rest of the part for integrity.
  • The camera should be intact and not pass the air, otherwise. there will be a loss of power.
  • Using the camera connects the two ends of your hose.
  • If it’s hard for you to pull the camera on the hose, you can resort to soap help. grease the ends of the corrugated tube. This will help you without much effort and further damage to eliminate the breakdown of the damaged part.
  • After a successful connection, unscrew the ends of the camera and wipe the entire surface of the corrugation dry.
  • Pour these places with “moment” glue and wrap the camera back.

Important! Glued places on top can be wrapped with electrical tape or tape. for greater reliability.

Repair when cliffing at the base

Depending on which the fitting the hose came off, it is necessary:

  • Cut the part in a torn place.
  • Clean the fitting of pollution and residues of the torn hose.
  • Combine a corrugated tube with a fitting. In this case, when connecting, do not use soap. Since the hose is bending in the process, it may fall out of the fitting.
  • The corrugated tube from the vacuum cleaner has stiffener ribs. for effective and convenient use. Therefore, you need to screw it into a fitting or into the base of the case with the application of glue or islands.
  • Using a screwdriver, pick out the remaining fragments of a plastic sleeve, into which a damaged element was inserted.
  • Next, glue the part using epoxy resin or sealant.
  • Give some time to dry before operation.

EASY. How to repair Bad broken Hose in Vacuum Cleaner

Redecorating

It happens that due to the low quality of the material, the hose in some places begins to be siphoning-it appears in it cracks and small breaks appear. These unfavorable places can be corrected with the help of a medical patch or polyhlorvinyl (PHV) isolation.

In order to fix the hose from the vacuum cleaner with such means:

  • Put on the scene of the gaps a patch from a medical patch with insulation carefully wound over PHV. Wrap it very tightly, with a small margin on both sides, because the corrugated tube can pass air.
  • You can gently cut the tough base in places where cracks appeared, gently cut the tough base and wind up the hose. Rewind the density with tape or island.

How to fix a hose from a vacuum cleaner with your own hands

There are several ways to repair hoses.

Repair with a simple cut

This method is suitable if the problem arises at the junction of a corrugated pipe with a plastic ending. For repair from the tools, a well.sharpened knife or a knife.haired woman is required. What do we have to do? Gently cut the sleeve, leaving the damaged area from the side of the pipe, remove it, freeing and cleaning the plastic tip

Then treat it from the inside with a sealant and carefully plunge the corrugation on the cutting line from the cutting line

Putting the bandage

If in the process of inaccurate operation on the hose, large damage was formed: cuts, punctures, etc. P It is appropriate to repair the overhead bandage method. It is used for damage to the sleeve in the middle (at a certain distance from the plastic ends).

The sequence of actions is as follows. To begin with, as in the first method, it is necessary to carefully cut off the sleeve, only now on both sides, leaving the damaged area in the middle. A rubber chamber from a bicycle about 10 centimeters long will be used as a bandage. Degrease cut ends, tightly tighten the camera on one of them so that a small section of the hose peeps out from under it. Apply the adhesive of a quick action (for example, the glue “Super-Main”) to both ends of the hose, dock them and stretch the rubber “bandage” in the opposite direction to stick to each of the fragments of a corrugated tube. The site of joint should be strictly in the middle.

Repair by the thermal method

For this method you will need a special industrial hairdryer and a heat.shaped tube. Advantages of this approach: high quality connection without reducing the length of the hose. This method of repair is universal, in terms of the place of damage to the hose.

  • select the suitable thermal tube in size;
  • Disconnect one of the plastic tips;
  • put on the heat.shrink tube through the free end of the corrugation;
  • Install the pipe at the place of damage and by means of a hairdryer evenly heat the heat shrink.

Following corrugation with internal conductors

If the vacuum cleaner model involves adjusting the power on the handle of the working nozzle, then wires are mounted in the hose that supplies the signal from the regulator to the motor. In this case, the repair of the hose is complicated by additional actions. Complete repair instructions have the following view:

  • It is necessary to disassemble the fastener’s fastener, freeing the contacts of the wires.
  • Free the damaged end of the sleeve from plastic.
  • Cut off the damaged corrugation without touching the conducting veins.
  • At the desired distance, roll contacts for fasteners.
  • Collect the body of the holder.

How to temporarily restore the vacuum cleaner hose

If you need to finish the cleaning at all costs, and damage to the air intake sleeve does not allow this, you can resort to temporary restoration of its performance. Damage such as a puncture or crack can be eliminated using an insulating tape or adhesive tape. The repair will not take much time, but such an emergency measure will not last long.

Features and device

This detail always has such a design that an independent “exit” is excluded from the mount. The components of telescopic tubes are:

  • external channel;
  • internal channel with a oriented on the axis holding the bar;
  • Stop (sometimes several stoppers);
  • The cuff of the outer tube covering the inner channel.

The cuff body contains an additional stop and its drive. This drive is made in the format of a rotary body that contacts directly with the locking unit. Before fixing ledges had to be entered into the locking holes of the internal channels. These holes were formed by stamping, and therefore sometimes were not at an angle of 90 degrees. As a result, the design periodically “jumped out” from the nest.

torn, hose, kerher, vacuum, cleaner

The telescopic suction pipe is fixed in a given position using a built.in spring. In the products of all leading brands, it is closed from the inside. the opening is not initially provided for. Most often, the spring block looks like a curved ring. In addition, non.vegetable cloves and caps are added.

The causes of defects

Cracks, breaks, punctures on the body of the vacuum cleaner hose can appear for various reasons. However, the main reason, of course, should be considered incorrect handling of this detail.

What actions of the user lead to the appearance of defects on the body of a corrugated tube?

  • Towing the vacuum cleaner from place to place through the hose.
  • The bend of the tube under unacceptable angles during cleaning.
  • Inaccurate use in conditions of cleaning objects with sharp edges.
  • Storage is not according to the instructions.

The natural reason for the formation of defects should also be considered the outflow of the service life of the product, wear, low quality of the material.

Often violation of the rules of operation by owners of harvesting equipment lead to the appearance of defects on the body of a corrugated sleeve. Working with a vacuum cleaner, it is not recommended to apply physical force directly to the hose

Towing the vacuum cleaner from place to place by pulling the device for a working hose. practice is quite common.

torn, hose, kerher, vacuum, cleaner

At the same time, many owners of vacuum cleaners make such “tricks” completely unaware of the future consequences. Meanwhile, the instructions for any vacuum cleaner clearly reads. this cannot be done!

The bend of the pipeline at an unacceptable angle may take place when the owner of the vacuum cleaner in the heat of cleaning seeks to get zones theoretically inaccessible in operational and technical parameters of cleaning equipment.

Such a bend of the sleeve of the corrugation contributes to the rapid appearance of a crack or rupture. Therefore, manipulations with a hose during cleaning by a vacuum cleaner should exclude hoodies of corrugation at steep corners

Several times such attempts may end quite well. However, the strength of the material in relation to unacceptable loads is not limitless. And therefore, at the most inopportune moment, the pipeline will simply burst in the place where there was an unacceptable outrage.

Carrying out harvesting work can be performed in different conditions. For example, in conditions of cleaning furniture, the frame of which has metal parts with sharp faces

If in such conditions to manipulate the hose inadvertently, there are all the prerequisites for the appearance of cuts on the body of the corrugation

Finally, the rules for storing harvesting equipment specifically painted in the instructions of the vacuum cleaner cannot be violated, since violation here is one of the reasons for the malfunction of the vacuum cleaner hose.

The conditions for storage of accessories of household cleaning equipment directly affect the quality of the material from which the same working hose is made. Therefore, violations of storage rules contribute to the appearance of defects

So, storage of the device together with accessories, or separately accessories, at a temperature below the recommended leads to a decrease in the strength of the material of the corrugated tube.

Sudden temperature changes, loaded state, unacceptable excesses are also critical for the material of the hose.

Structural features of the hose

Most corrugated hoses of cleaning equipment are a pipe made on the basis of elastic material (polypropylene).

The tube usually has a length of not more than 1.5 meters. Thanks to the corrugated surface, the accessory has the ability to stretch within small limits.

One end of the elastic pipeline ends with a short segment of a hard plastic tube. This part is a link of the connection with an extension bar or directly with the working nozzle of the vacuum cleaner.

The opposite end part of the hose is equipped with a short pipe-beam, through which a locking connection is formed with the vacuum cleaner module. This pipe-zoom is actually a continuation of the corrugated tube.

The practice of using vacuum cleaners notes that it is on the joint lines of an elastic corrugation with terminal stiff elements that the rupture most often occurs, and the breakdown of the hose is considered one of the common breakdowns of the vacuum cleaner.

Meanwhile, the formation of even a small impulse of the hose leads to a significant loss of the effectiveness of cleaning equipment.

How the vacuum cleaner works: mechanics and electrician

The basis of the device of any vacuum cleaner is an air pump (or fan). The engine is equipped with a impeller, which, rotating, absorbs the air flow with blades and, after compression, sharply releases it out. The highways are in the case, as well as at the beginning and at the end of the air pump. High.pressure absorptions operate under low pressure, and pressure. under high. The body circulates the air that is discharged during the engine operation. Together with an air stream, dust particles are drawn into the hose with a nozzle and fall into a vacuum capacity. There the dust settles, and its small particles blow the air back. In order to prevent the backward exit of the smallest dust particles, modern models of vacuum cleaners are equipped with filters.

Ordinary vacuum cleaners (Samsung 1600 W and others) are designed for domestic use. You can not remove building garbage and dust from concrete with them.

The fan impeller sets in motion a collector.type electric engine. AC indicator in such a mechanism is 220 V. Tiristor regulators are installed in high.power household agrasts. With their help, you can limit the force of absorption of dust and carry out a careful cleaning of the room. The control functions of the vacuum cleaner are controlled by a board located inside the case.

How to make a case correctly?

For the convenience of work, first you need to remove the fork from the outlet and disconnect the absorption hose from the vacuum cleaner, otherwise it will interfere with the disassembly. Then it is necessary to remove the plastic vacuum cleaner or a bag to collect garbage, as well as dismantle all filters. Using the appropriate screwdriver, twist all the fasteners. As a rule, they are located on the outside: two in the front of the vacuum cleaner and four on the other side (under the handle and from the end). The location and number of screws depends solely on the model and type of device.

In Samsung vacuum cleaners, fasteners, with which the case is assembled, are not masked. It is not difficult to find them, you just need to carefully examine the entire device. But it should also be taken into account that, in addition to screws, individual parts of the device case can be attached to each other using special plastic latches. Therefore, if the case does not understand after the screws are twisted, do not be zealous and use force, otherwise it is easy to break it.

It should be disassembled very carefully: lift the upper part (preferably in the front) with a construction or stationery knife, and smoothly directed upward movement from the design of the vacuum cleaner. If the cover is also fixed with plastic locks, then in these places it will not give in. you need to alternately lift all the latches. It is convenient to do it with a flat metal object: a ruler, a knife. It is not recommended to use a slotted screwdriver, since you can damage the case.

How to fix a hose yourself

If the corrugation has leaked in some place-this does not mean that you need to urgently buy a new hose. The old hose for the vacuum cleaner can be repaired independently. In addition, the repair of this part does not require thorough knowledge. Since repair the vacuum cleaner hose?

Before starting the repair, unscrew the hose from the vacuum cleaner and check if sharp or large objects are stuck in it. Stretch it and look inside. if the lumen is not visible, take the ruler (with a round end), clean the hose and mount. So you free the absorption hose from the blockage, and it will be useful for the vacuum cleaner. you can check the power of its absorption.

Cracks on the hose (the frequent problem of vacuum cleaners for the pool). it will be just to carry out such a repair. You will only need to make a pad. Old bicycle tire is suitable. From this tire, cut the piece in width more than the place of damage and pull on the hose.

Then press the mounting with elastic bands. Another option, however, is less reliable, is to patch a crack by a medical patch and wrap it with polyhlorvinyl insulation.

The hose broke at the handle or base-a common breakdown, because of which it is often necessary to repair Bosch vacuum cleaners. The easiest repair in the place where the vacuum cleaner tube is connected to the hose is to rewind the mount with electrical tape. This method is not the most durable, but the easiest.

DIY vacuum recovery system

A more reliable way is to cut off the gap site. In this case, you do not need a thorough replacement of the hose, and the corrugation will look like new. As a rule, the device handle has plastic bushings inside. the hose is glued into them.

  • You need to pull out the fragment of the hose from the sleeve with a screwdriver.
  • Cut off a spoiled piece. the pen and the corrugation itself will become “separate” details.
  • Pick up the remains of the hose, clean the pen of dust and degrease.
  • Check if the handle and cut hose coincide in width. Match? Lubricate the edges with a super-cell and screw it back into the handle. Glue should be smeared with high.quality, otherwise in the case of the technique of Philipps, the subsequent breakdown of the Philips vacuum cleaner is possible.

Now leave the hose for the vacuum cleaner to dry, and after the corrugation completely dries will look like new, only a little shorter. For reliability, fastening can be wrapped with electrical tape. If independent repair for you is a troublesome matter, the vacuum cleaner can be attributed to the service, specialists can quickly disassemble it, look at the problem and eliminate it. Repair of the part of the vacuum cleaner will cost 8-20 at.e.

Of course, any repair is a temporary measure (which is especially true for vacuum cleaners for the home), which sooner or later will lead to the idea of ​​buying a new hose. At the same time, it is desirable to purchase a corrugated hose to any vacuum cleaner with the holder. The holder will extend the life of the hose itself, since it was created specifically so that the corrugation does not get confused underfoot, and the hose itself is stored in the correct position.

The holder is made of steel, plastic, and can be attached to the wall next to the storage site of the vacuum cleaner. You can buy a universal vacuum cleaner, which approaches most models, or a special holder for a particular model.

Of course, you will not find the holder to the Ural model, but for the models of Scarlett, Ariete you can buy a universal holder, the price of which will be about 5-8 at.e.

2.1 we buy a new hose. the price of the question

If Thomas did not help repair vacuum cleaners, then the vacuum cleaner needs to replace the hose. So how much will it cost to buy a new hose?

  • For a model such as the Urals, you will have to select a hose from those available in the store. Since the Urals stopped releasing, choosing a new accessory, it will be necessary to take into account a special mount. The price of the part for the Ural model can cost like 5.e., So 30 at.e. Also for the Ural vacuum cleaner, hoses are suitable for ordinary bags of units, but the fastening of modern cyclone models to the Urals to the vacuum cleaner will not be suitable for the vacuum cleaner.
  • Ariete vacuum cleaners need special flexible hoses, which are made of rubber. The price of such a model for Ariete will be about 70-90 in.e., A flexible hose for a vacuum cleaner, where the handle has the ability to switch power, will cost 80-100. The part for the ArieTe cyclone vacuum cleaner will cost cheaper-the plastic hose will cost about 10-20 U.e., A model with control for Ariete will cost 30-37 in.e.
  • Universal hoses for Siemens, Scarlett, LG, Daewoo vacuum cleaners will cost about 10-25 at.e. For the Siemens and Daewoo model with a round connection, you can buy a hose for 30.e., Here the handle will be rubberized, and the mount is made from a mixture of materials. For the Daewoo vacuum cleaner, you can also purchase a hose where the handle will have a curved shape, the part itself will be made of rubber, and the handle will be made of plastic.

Repair methods

If the hose breaks, jumps out of the barborer, flies out of the adapter, burst, broke, clogged or broke, experts recommend changing the damaged part and not rush to take the device for repair. Having a minimum set of tools, each owner can independently repair the device.

How to Repair Karcher WD 5 || 1.348-190.0 ||

The main methods of repairing a corrugated part:

  • removal of a deformed area;
  • bandage
  • the use of thermosoba;
  • repair of a hose with an electric line;
  • Temporary fastening of adhesive tapes.

The first option is the easiest way to restore the integrity of the part, which requires a minimum set of tools. To remove the damaged area, it is necessary to perform an even incision at the gap site, remove the cut section from the ending, cover the fishing line for the cutting trimmer with a hermetic tool and insert a whole hose into the tip.

Many vacuum cleaners have collapsible ending with nylon bushings. With the help of a thread on the sleeve, a hose is fixed. To carry out the repair of this device, it is necessary to disconnect the fixers, change the ring cork and remove the sleeve with a deformed area. After cutting the damaged area, it is necessary to assemble the structure in the reverse order.

The second option of deformation of the hose is characterized by the presence of mechanical damage in the form of incisions and ruptures caused by the careless operation of household appliances. The material for creating a bandage can be ordinary rubber from a bicycle, which has a high level of elasticity and tightly adjacent to the hose

The repair process consists of the following stages:

  • trimming the damaged area;
  • stripping the end parts of the hose;
  • preparation of the required piece of bicycle rubber, the length of which should be no more than 15 cm;
  • nozzle of a rubber bandage on a damaged area;
  • connection of the ends of the hose using a special adhesive;
  • lubrication of the bandage mounting location with universal glue;
  • A tight application of a piece of camera to the hose and reliable fixation until the glue dries completely.

Repair of a corrugated part using a building hairdryer and heat.shaped material is the most difficult method, which has high reliability and strength. Advantages. the lack of the need to remove a deformed piece of hose, the possibility of repairing any damaged area. Disadvantage. the presence of a special construction hairdryer. The main stages of repair work:

  • selection of thermal material in accordance with the diameter and color of the hose;
  • dismantling the ending from the intact side;
  • fixation of thermomaterial at the gap;
  • uniform heating of the rubber lining along its entire length.

This electrical device is installed on devices that have an air flow control sensor. The peculiarity of the repair is the removal of the damaged area along with the electric wires, which will require a second connection. Repair measures:

  • disassembling the body of the pipe;
  • disconnecting the pipe from the hose;
  • dismantling the defective part of the pipe;
  • Spike of contact pins for conductors;
  • Staff of the structure.

Among the main disadvantages of this device with an electric control sensor, experts highlight the possible deformation of the hose at the junction of it with the handle and the gap of only electric wires.

To quickly carry out temporary repair, experts recommend using tape, painting tape and island, which will help to close the damaged area for a short period of time.

  • cleaning and degreasing the place of overlap of adhesive material;
  • fastening the chosen sticking of the tape in two or three layers;
  • Fixation of the end of the tape with glue.

This design will not be able to replace full repair and has a short operational period, but can become a quick way to integrate the device.

Particular attention should be paid to the occurrence of a specific whistle and smell, which the hose can issue in the process of work, as well as a sharp decrease in absorption force. The main reason for this type of breakdown is the presence of an extraneous object inside a corrugated pipe

torn, hose, kerher, vacuum, cleaner

Most often, masters extract small children’s toys, socks, handkerchiefs, paper and plastic bags. Even an inexperienced master can eliminate this type of malfunction with his own hands by sticking a thick wire or a piece of reinforcement into a corrugated cavity. Disassemble the device, clean and fix it, pull out the sock, get a toy, get rid of the smell for several minutes.

About how to repair a vacuum cleaner hose, watch the following video.

How to disassemble a vacuum cleaner hose

In order to determine the cause of the hose breakdown, you need to disassemble it and check the presence of external damage, impulses, blockages, and then take appropriate repair measures. Instructions:

  • Unscrew the mounting of the hose holder.
  • Remove the mounting mechanism.
  • Remove the latch.
  • Unscrew the hose guide and remove it.
  • Remove the hose, repair it.
  • Follow back assembly.

The diameter of the vacuum cleaner hose

Hoses for modern vacuum cleaners have such internal diameters: 32, 36, 38, 50. The hose pipe can join the input hole of the vacuum cleaner with a thread in sizes, mm:

The vacuum cleaner hose is a very important component. If it breaks, the vacuum cleaner may become unusable. The hose can break due to improper storage or operation. Buying a new hose is not always possible due to the lack of components for this vacuum cleaner model or a large cost of a new hose. In some cases, the repair of the hose can be performed independently in various ways: using a simple cut, applying a bandage or the thermal method. After such a repair, the hose can last a few more years.

About the author

| Denial of responsibility | Contacts |RSS