How to get rid of scratches on the refrigerator

How to polish the stainless steel refrigerator?

Polish the surface of the refrigerator, possibly with the help of a small amount of olive oil. Aerosol for polishing furniture is also suitable for this purpose. You can also use cars. Wax. Turning to the instructions from the manufacturer, you will be able to clarify the details of care precisely for your technique.

Scratch on matte stainless steel can be removed using a nail polishing block. As an abrasive agent, you can use a bleaching toothpaste. Apply it to the damaged place and rub it with a brush with a soft bristle or soft cloth along the metal texture. Wipe the paste with a clean damp cloth.

The reasons for the appearance of scratches on the refrigerator

Most often, scratches appear on the door and side surfaces of the refrigerator. They can be applied during transportation or movement of equipment from place to place. The cause of damage may be improper cleaning and care. Some cleaners have an aggressive effect on the material from which the unit is made.

Most often, scratches appear on the door and side surfaces of the refrigerator

The behavior of children or animals can also be the causes of scratches. Roughness occurs when fastening on the refrigerator of decor items (magnets, photographs, calendars, etc.D.).

The behavior of children or animals can also be the causes of scratches.

See soy.Flavored doors in the interior. A variety of models and textures. A photo.

Try to remove small scratches with whitening paste

You can cope with minor damage on the surface of the refrigerator using a hygienic agent that is found in every bathroom. You can use toothpaste with a whitening effect. The main thing is that it does not contain intracers that can aggravate the situation. Step.By.Step procedure:

• Take an old toothbrush with soft bristles and apply a small amount of pasta;
• Gently process the surface with circular motions, try to direct movements along the scratch;
• Wait for 5-10 minutes so that the product penetrates into the damage and dries;
• With a soft tissue cloth, remove the remaining pasta and polish;
• If necessary, you can repeat the procedure.

Carefully use toothpaste with a bleaching effect in relation to colored surfaces, because under the influence of the chemical composition the upper layer may change. It is better not to take risks and to restore the appearance of a color refrigerator choose a more gentle method.

How to remove scratches from plastic parts and combined parts

If the damage to the refrigerator was affected not only by metal on the outside, but also other parts, the output is also found. Help:

Pick the suitable shade of the product, clean the part, let it dry and process in the same way as in the case of an external metal surface.

Small damage can be packed with a drop of vegetable oil. The method will not help to completely eliminate the defect, but it will disguise it for a long time.

Experts to remove scratches with plastic use an ordinary lighter. If you are sure that you can do it yourself, you can do the same yourself. To do this, light the fire and bring it to the place of the defect at a distance of 10 mm. The plastic is heated and leveled. After that, let the surfaces cool.

Restore the appearance of non.Metallic elements of the device as follows:

• If the furrow appeared on a plastic part, try to bring a lighted lighter or match to a problem area at a distance of 1 cm. The flame should be influenced on the surface of 3-4 seconds. The surface of the plastic warms up and the scratches will “drag out”.
• Using a car marker. Degrease the damaged area and apply the product. Remove the remains of the paint after it dries with a smearing cloth.
• GOI paste. Treat the cleaned surface with a remedy. Polish, remove excess drug.
• Wax used in the production of candles. Heat the material so that it softens, and rub it into a scratch, polish the flannel cloth.

How to polish the stainless steel refrigerator?

Apply a little pasta to the bristle bristles, rub it with problem areas. Move along the metal texture and do not try very hard. Periodically erase the toothpaste with a rag and check the result. Continue until the results of your efforts satisfy you.

• Clean the surface of dust and degrease it.
• Install the suction cup so that the central pin is located in the middle of the damage.
• Fix the base of the pin on the surface of the dent.
• Scrolling the screw, slowly pull the metal.

How to polish the stainless steel refrigerator?

Apply a little pasta to the bristle bristles, rub it with problem areas. Move along the metal texture and do not try very hard. Periodically erase the toothpaste with a rag and check the result. Continue until the results of your efforts satisfy you.

Mix them in a bottle with a spray in a ratio of 3 parts of white vinegar and 1 part of the water. Spray into the refrigerator and wipe it with a paper towel. Vinegar cope with fat fingerprints excellently.

Useful recommendations

To get rid of scratches of different difficulties on the refrigerator, you will need:

Polish, soft cleaning powder, not granular toothpaste; toothbrush, bottomless cloth or sponge; sandpaper; marker pencil or acrylic paint; special kit for polishing; water; vinegar or soda solution.

For some damage, ordinary olive, sunflower or baby oil may be suitable. This option will not eliminate the problem completely, but can disguise it for a while. It is worth remembering that over time, dirt and dust will begin to accumulate in the treated places, as a result of which the surface of the refrigerator will not look aesthetically pleasing. Therefore, the problem requires a deeper solution.

For some damage, ordinary olive, sunflower or baby oil may be suitable.

Experienced housewives often use ordinary wax for polishing. Thanks to him, scratches are invisible, and the surface looks smooth and even.

The modern market offers many special tools and devices that help maintain the appearance of the refrigerator in excellent condition for a long time. In addition to improvised means and sets, manufacturers make various pastes, creams, gels, aerosols, paints and marked pencils.

Experienced housewives often use ordinary wax for polishing.

To safely remove scratches and effectively clean the coating of the refrigerator, especially white, experts recommend using a melamine sponge, which contains melamine resin and microfiber of synthetics. Before use, it is moistened with warm water without the use of any detergents. Such a sponge not only does not damage the surface, but also collects all the contaminants accumulated in the microcracks.

To safely remove scratches and effectively clean the coating of the refrigerator, especially white, experts recommend using a melamine sponge, which contains melamine resin and microfiber of synthetics.

See also the design of the kitchen in black and white colors

Useful tips:

In this article, we offered you some effective ways so that you can get rid of scuffs on a stylish and beautiful refrigerator of steel color of stainless steel. Use these tips in practice so that your home always shines with cleanliness and neatness.

Useful tips:

Any large household appliances in the kitchen are in sight and striking. I do not want guests to see the flaws that appeared. It is too early to throw away the device and run behind the new, if the paint just peeled on the door or the outer wall. Correct this can:

Both methods will disguise cracks and dumped paint, and in addition will update the design.

Gluing

Booking the refrigerator with a film cheaper than staining. However, it will take a lot of time, patience, accuracy and dexterity. With insufficient attentiveness, the material can lie crookedly, go by bubbles or wrinkles. For the desired result, glue the scratches evenly and the first time, otherwise you will have to stock up on a few rolons of the film.

It is better to choose material with a water.Repellent effect: in the kitchen, it will last longer. Professionals advise Oracal, Avery Dennison, Orafol or Ritrama. Their cost may seem overstated, but it corresponds to the quality.

Films can be either plain or with some kind of scenery or photo printing. Unusual material will not only remove the shortcomings from the refrigerator, but also add special Accent and mood to the kitchen interior. If in the store you do not like any of the colors, you can print any picture on a self.Adhesive film. You can even post a family photo.

The pasting process is as follows:

• The surface of the refrigerator is thoroughly washed and dried.
• All accessories are unscrewed.
• It is optional, but for convenience, it is better to roll the roll in advance and let it get out so that it straightens up. Then, a small strip of base of 2-3 cm is separated from the upper edge of the film.
• The adhesive side is neatly applied to the clean and dry surface. Do it as smooth as possible, t. To. The quality of further pasting depends on this.
• The wall of the refrigerator is wetted with a soap solution. It is more convenient to do this from a spray gun.
• Gradually peeling off the base, attach the film. For convenience, you can use a spatula or plastic card.
• The fully pasted surface is examined for the presence of bubbles, if necessary, it is expelled by a spatula or a dry rag.
• An hour later, the film will finally dry out, settle down. Then you can install accessories in place.

Painting

It is easier to paint the refrigerator, but it is important to take into account the features of household appliances. The coating of the refrigerator should meet special requirements.

The paint should not only be beautiful, but also match the following characteristics:

• Protect the refrigerator from mechanical damage;
• Hold the even layer in an upright position, and not drain down when drying;
• Be elastic to withstand different temperature regimes;
• Be on the detergent.

In particular, funds with an acrylic composition for metal, nitroemal automotive and epoxy or polyurethane paint are suitable.

Surface preparation and staining

Ideally, you should take the refrigerator out into the street and paint it there in calm weather. If this is not possible, then ensure the circulation of air in the room (without drafts, otherwise the paint may give a stream). Then prepare the space around:

• Cover the floor, walls and other surfaces on which the coloring agent can get, newspapers.
• Turn off the refrigerator from the outlet and push it away from the wall for convenience.
• It is not necessary to primer the surface, wash it well with a detergent.
• Remove the old layer of paint with sandpaper, carefully fencing all the bumps.
• Wipe the refrigerator with wet, and then dry with a smoking rag.
• Degrease the walls and door.
• Brave with food film those parts that do not need staining (electric panel, handle, rubber seals, holes, etc.).
• Put on rubber gloves and respirator.
• Apply paint with a brush, roller or with the help of a spray/spray can two or three layers, letting them dry together for 40 minutes.

Advice. Apply the product vertically or from left to right. Stell your small brush to tint hard.To.Reach places. If desired, a dried refrigerator can be covered with automobile varnish. This will give a shine.

Cleaning doors of a stainless steel refrigerator

Like wood, stainless steel has its own structure, or “texture”. When cleaning, polishing or grinding the material, it is necessary to move along this texture. To determine the direction, come as follows:

Clean the door with soft cleaning and polishing powder.

Before proceeding with the removal of scratches from the surface of stainless steel, it is necessary to clean it. When grinding or polishing the door, dirt remaining on it, dust and garbage can damage it even more. Clean the surface of the door with a soft tool, such as Bon Ami, Comet or Ajax.

Remove dirt from the refrigerator from the door, wiping it with a cleaning agent from vinegar.

This is a soft, but effective tool contains 1% more acid than standard food vinegar. Additional acid helps to clean the surface of fat spots. Before proceeding to the removal of scratches, clean the surface of the door with vinegar.