In Rostov the seller of “fake” gas meters will pay a fine for his client
than two thousand interventions in the operation of gas meters revealed metrologists in the Rostov region in 2016. Such data are provided by specialists of Gazprom Mezhregiongaz Rostov-on-Don LLC. The leaders of the black list of violators are Yegorlyksky, Salsky and Shakhtinsky districts. These districts account for most of the cases. As noted in the company, in most cases, consumers do not re-equip their meters themselves, but seek help from “specialists” or even buy initially “left-handed” or, as they are also called “charged”, meters.
As a result, violators have to pay for illegal use of natural gas for three months in the amount of ten times the norm, the amount can reach several hundred thousand. However, such cases do not always turn into financial responsibility for consumers. An unusual case happened recently in Rostov.
How to bypass an antimagnetic sticker on the meter at home?
Antimagnetic tapes on meters are installed to provide protection from extraneous effects. The very device of the seal eliminates the possibility of bypassing the magnetic tape in a simple way. That is why it is extremely difficult to cheat or remove the magnetic seal from an electricity, water or gas meter on your own.
There are different ways to solve these problems, but not all of them are safe.
The location of the magnet at a distance
Antimagnetic tape on the water meter Antimagnetic tape on the water meter, to cheat which they are trying to remove the effect of the magnet, are particularly sensitive. Protection is triggered when the strength of the magnetic field reaches 90-100 mT at a distance of 3-5 cm. The slurry encapsulated in the capsule will change shape (color) even with minimal contact. Therefore, to bypass the antimagnetic seal on the water, electricity or gas meter, use the location of the magnet at a distance.
As already mentioned, after a certain modification of the UPS, by placing a magnet on the back of the body, you can bypass the magnetic tape. Distance in most cases will be sufficient to affect the accounting mechanism and safe for other household equipment.
how to lower your electric bill Oncor said I was meter tampering Really !
How to remove the antimagnetic seal by freezing
Trying to remove the seal from a gas, water or electric meter using exposure to low temperatures is an extremely unreliable method.
The technical device of antimagnetic protection is supposed to work in conditions of low air temperature, some stickers retain functionality in freezing temperatures up to.30-40°C.
That’s why the attempt to block antimagnetic seal by applying dry ice will not give the expected result, and peeling off the antimagnetic tape in the cold may lead to its partial destruction or to a change in the color of the indicator.
How to peel off an antimagnetic seal with a hair dryer
Remove the antimagnetic sticker from the water meter or electric meter by the influence of hot air is also very difficult. This method was used on old stickers, with some skill and improvised means tape was glued from the surface.
The new type of anti-magnetic stickers are designed to withstand prolonged heating up to 50. 60 °C.
Therefore, heating with hot air will not help disarm the antimagnetic seal on the water meter or gas meter PSU. When exposed to high temperatures, it is also possible to destroy the indicator, change its shape or color.
How to cheat a magnetic seal on the meter with a ferromagnetic ring
Ferromagnetic parts There is a way to bypass the magnetic seal on a water meter or electric meter reading by using a ferromagnetic (ferrite) ring:
- Purchase the ferromagnetic part in an electrical goods store or remove it from a household appliance, such as the electronic unit of a fluorescent lamp.
- Place the ferrite ring on the indicator so that the capsule with the suspension is inside.
The ring thus shields the external magnetic field and blocks the mechanism of the seal actuation.
The method can help maintain the antimagnetic seal and fool the protection, but there is a high probability of a negative result. The ferrite ring may reduce the intensity of the external magnetic field insufficiently, leading to the triggering of the magnetic tape.
The result of the procedure depends on the sensitivity of the indicator to the magnetic field, the distance and the intensity of the ring.
How to cheat the magnetic tape on the meter coating gel
Another way is to trick the magnetic tape on an electric meter or water meter by coating it with gel. Since an attempt to peel off the protective strip in the usual way will lead to a warning inscription, in order to carefully remove the seal from the meter and not to leave traces on it, use gel.
The gel should be applied to the tape and left for 2-3 hours, then you can try to peel off the magnetic seal. The method is not reliable, because the gel can excessively impregnate the structure of the sticker, leading to its changes, which can be regarded as intentional damage to the UUT.
Why do you need a magnet on the gas meter. Stopping the gas meter
and more people are looking at their gas bills with horror. Every time their price gets higher and salaries and pensions do not change. Blue fuel consumers are looking for any ways to reduce the amount of payment for gas used, and the remaining money to spend on themselves and their families. Can you pay less for gas each month, but use more of it, you will learn in this article.
Almost all people in whose apartments there is a gas stove, in order to save and fully control the amount of gas consumed, install meters. But even this method of saving does not help, because cooking takes a large amount of time and, accordingly, the blue fuel.
For people who want to use gas in large quantities, but at the same time pay a minimum amount of money, manufacturers have invented so-called magnets, how to stop the gas meter, which suspend the work of the meter. Such magnets can easily be ordered on the Internet or bought at the market from special people. At the heart of gas meters is an antimagnetic coupling, which prevents any action capable of tweaking the work of the device. These are the magnets that can damage the coupling, and therefore stop the gas meter. These magnets consist of special elements, such as neodymium, boron or iron, which directly affect the performance of the device.
It is best to use neodymium magnets to suspend the gas meter. Selecting such a magnet is easy enough, you only need to know the model of the meter and its name. It is very easy to suspend the operation of the gas meter, you just need to take into account a few details. The gas meter works in a gas environment, which affects its structure. The consumer needs to determine the right time when the numbers on the meter are not wound up, but the blue fuel is still coming. If it is the other way round, you have to look for the point where the counter stops working, by means of searching. The ideal point of contact between the device and the magnet in order to suspend its operation, would be the front panel of the meter, namely where the dial is.
When buying a special neodymium magnet you should pay attention to its size, it is better to buy a large-sized sample. In addition, in order to avoid the appearance of various kinds of defects on the meter under the magnet is better to put paper or cloth.
The buyer should know that the use of such magnets, punishable by law, and if an employee of the gas service finds such an object, he will write out a large monetary fine to the owner. Therefore, it is not recommended to use such a magnet permanently, and when you ring the doorbell for personal safety, it is best to remove it from the meter.
So, you can use a lot of blue fuel and pay less, but very carefully.
How to Cheat the Meter: Ukrainians Cheat to Make Payments Easier
It is worth mentioning that this method twists money only on dry-type water meters. Many metering devices are equipped with check valves, which prevent the reversal of the rotation vector of mechanisms.
But the models with a membrane mechanism for counting consumption are not stopped by a magnet on the gas. They can include products of brands Metrix, Primagaz, Berestye G2,5. G6, Vizar G4 and others.
Gas meter BK G4 device and stop. Gas meter VK G4 his device from the inside and the answer to the question Controllers Gorgaz long ago found resistance to stopping or winding back gas meter readings by mechanical means.
Why put a magnet on the meter is a bad idea
Checkers can easily find a magnet and write a fine of up to 15 thousand.
To reduce water and light charges, some people put powerful magnets on meters. Under the influence of a magnetic field, even during the consumption of water and light, the device does not rotate.
But the magnet is not an innocent way to save money. If a person spends water and light, but does not pay for them. he steals, that is, commits an administrative offense. In the laws it is called theft and is punishable by a fine, temporary detention or community service.
Magnet to stop the gas meter
A magnet to stop the gas meter is often used by gas consumers to reduce their gas bills.
The high amounts natural resource consumers are forced to pay for their gas, electricity and water consumption are pushing citizens to use illegal ways to save money.
Dear Readers! Our articles talk about ways to solve legal issues, but each case is unique.
If you would like to know how to solve your problem. Contact the online consultant form on the right or call 7 (800) 551-79-07. It’s fast and free!
All sorts of magnets for stopping the gas meter are being actively sold at the moment. You can buy them not only in the markets of our country, but also on the Internet, where there are many ads for the sale of these magnets. There are people who remain satisfied with the purchase of magnets to stop the gas meter. They point out that magnets do their job, and the gas bill is sharply reduced through their use. However, there are also many people who argue that no magnets to stop the gas meter does not work, the meters have worked and still work, the payment for gas is not reduced, and increases with the growth of tariffs.
Thus, sellers of magnets to stop the gas meter does not give any guarantee. Because it is illegal to sell any device, such as a magnet to stop a gas meter. By buying these devices, the consumer is cheating the state, using natural resources for free. This in itself is a crime. Therefore, a person who has been spotted with a magnet to stop the gas meter can be held liable. No lawyer can give a recommendation on the use of these devices. Because this use is illegal and there may be negative consequences for the person. In addition, a competent lawyer will explain that you should not hope for impunity in the case of using a magnet to stop the gas meter. Gas authorities often make rounds of their customers in order to check the equipment installed in apartments and the private sector. Therefore, an employee of the gas service can easily be noticed a magnet installed in the home of the consumer to stop the gas meter. Then the appropriate steps will be taken to remedy this violation and hold the violator of the law accountable.
Despite all the above, each consumer of natural resources to independently decide whether to use magnets to stop the gas meter, or not. However, if a problem arises related to the occurrence of negative consequences from this use, you should contact a lawyer. A knowledgeable lawyer can help a person protect their interests and minimize adverse consequences. In addition, if the consumer decided to buy a magnet to stop the gas meter, you should always keep in mind the fact that the seller of such magnets does not guarantee the effective work of this product. So often the consumer buys a completely pointless thing that will not reduce the charge for gas and other natural resources consumption. Thus, the customer is most likely being deceived. In this case, the consumer of natural resources is also better to contact the lawyers to get their money back for the implementation of the illegal sale of his magnet to stop the gas meter.
Did not find an answer to your question? See how to solve your problem. call right now:
7 (800) 551-79-07 (Regions )7 (800) 551-79-07 (Moscow)7 (800) 551-79-07 (St. Petersburg)
Memo to the gas consumer p. 3
THE PICTURE CAN BE SAVED. right mouse button. “save as.”. assign a name.
“Memo” written after the stories of several neighbors about the actions of controllers, the courts, hearing only gasprom. They “got it all”. The gas bills, the “maintenance” bills, the “people’s wealth” advertising (which people are we talking about ?). and temperature in the house. т.е. The “Memo” summarizes a great deal of information.
1) WHY DO WE PAY MORE FOR GAS THAN IN EUROPE WHO BUYS GAS FROM US ? See “What’s the price of wood these days FINAL” http://www.stihi.ru/2019/10/19/8932. How to pay less for gas, Strictly adhering to the laws!
2) All goods purchased by us are measured by the seller’s measuring instruments, and the seller is responsible for their accuracy and timely verification.
EVERYTHING EXCEPT FOR UTILITY SERVICES. GAS, WATER, ELECTRICITY, HEAT !! PA-RA-DOX. (power engineers have understood this and are installing their meters on poles)
Resolution of the Government of 19.01.1998 N 55 Paragraph 7. A seller is obliged to maintain and keep the measuring devices in a good working order, to have them checked in due time and in accordance with the established procedure. To verify the correctness of the price, measure and weight of the purchased goods, the appropriate measuring equipment should be installed in the sales area in an accessible place.
THAT IS, GASPROM MUST INSTALL A METER, ENSURE TIMELY VERIFICATION OF THE GAS METER.
MASKS DROWNED IN REGULATION OF THE REGULATION OF THE GOVERNMENT N 307 FROM MAY 23, 2006. “On the APPLICATION OF COMMUNAL SERVICES to CIVIL CIVILIZERS” first of all it says: “In order to protect the rights of consumers of public services.”And in decrees N 354 and N 549, which replaced decree N 307, this phrase was simply thrown out for lack of use !!
A new “invention” of Mezhregiongaz: inspectors began to check the reaction of YOUR meter to a magnet, which they take out of their (which has no documents, identification numbers, quality certificates and characteristics confirming that it is a measuring instrument, methods of application, etc.).п.), if it responds, they declare the meter defective and. get an “additional charge” bill for tens or even hundreds of thousands! Interreiongaz lawyers refer to the certificate of conformity of SDS magnets used.TP.CM.04586-14 (you will not find it on the Internet!), but from the text of this certificate (its scan is given above) it absolutely does not follow from the correspondence of the magnet (nameless piece of metal) taken out of the to anything!!
AS SOON AS YOU SEE A MAGNET IN THE CONTROLLER’S HANDS, STOP HIM, MAKE A VIDEO, DEMAND TO SEE DOCUMENTS FOR THE MAGNET, MEASUREMENT METHODS APPROVED NOT BY GAZPROM BUT BY FGUP VNIR, CITE GOVERNMENT DECREE #354, WHICH DIRECTLY SAYS THAT GAZPROM MAY PUT UP SEALS RESPONSIVE TO EXTERNAL MAGNETIC FIELDS (AND ONLY IF NECESSARY). ), IN THE EXTREME CASE (IF HE DOES NOT COMPLY WITH YOUR REQUIREMENTS) THROW HIM OUT THE DOOR!
There is a letter-explanation of FSUE VNIIR (the legislator on measurements in), that references to their letters, which gasprom is trying to do, are unauthorized. These letters are not regulatory documents! These letters are sent to metrological organizations and copies to gas supply companies. for information
THIS SIGN UP (open the picture, you can save it by naming it).
WHEREAS the requirements of normative documents (meter passport, its specifications, laws):. THE CONSUMER HAS TO CHECK ALMOST DAILY WHETHER HIS METER REACTS TO THE MAGNET, SO THAT HE CAN IMMEDIATELY NOTIFY THE GAS SERVICE AND THUS AVOID ANY SANCTIONS ?
It’s absurd. That is why the PP N 354 (Government Decree) and is written for the controllers: “Install antimagnetic seals. INSTEAD OF COMPLYING WITH THE REQUIREMENT OF P. 354, THEY ARE DOING IT ON THEIR OWN, TAKING THE MAGNET OUT OF THEIR
MANY TYPES OF METERS (APPROVED FOR USE) INITIALLY, BECAUSE OF THE MATERIALS USED, REACT TO THE MAGNET. WITHOUT INTERVENTION IN THE METER !!) ( see “Super magnets and gas pressure at the Consumer inlet”, where there is a huge (far incomplete) list of such meters. http://www.stihi.ru/2018/08/16/2342
THE STRONG ALWAYS BLAME THE POWERLESS FOR THIS WE HEAR MANY EXAMPLES IN HISTORY. И.А. Krylov He who dines the girl, dances the girl! (from the movie “Mimino”)
THE SADDEST. IS THAT MANY JUDGES BY VIRTUE OF UNPROFESSIONALISM (OR YOU KNOW WHAT) TAKE THE SIDE OF GAZPROM IN THIS MAGNETIC MUDDLE. AND THEY PERFECTLY UNDERSTAND THAT CHECKING THIS PARAMETER AT HOME FOR THE ABOVE REASONS. ILLEGAL!! IT IS POSSIBLE ONLY WHEN CALIBRATED BY SPECIAL CERTIFIED METROLOGICAL ORGANIZATIONS (FOR EXAMPLE, CSM).
there is even an incomprehensible case when the entire physics department of a very reputable educational institution (doctors, candidates, professors) unanimously signed a document stating that a counter of this type (inside steel rods and duraly body) is subject to the influence of external magnetic fields. the only question is the strength of the magnet and the distance to it, but the Court refused to accept this document, thereby undermining faith in the courts, showing that all is closed and the truth does not interest them !!
HOW CONTROLLERS FAIL GAS METERS
Inside the meter, over the period of operation, particles and microparticles of scale, rust, formed in the supply pipe and brought inside by the flow of incoming gas, may be present in a scattered form. When a powerful magnet is placed outside the counter case, these particles begin to “pile up” on the back side of the counter case (inside it) to the place of the strongest magnetic field and when the magnet moves, this pile follows it, attracting additional particles on the way. Having thus moved the formed pile to the place above the gears or rotation axes and having torn off the magnet from the body above this place, a kind of “dumping” of this pile into the mechanics is made. The consequences will be very bad. if they get between the gears or in the rubbing surfaces, they increase the friction, increase the error and can even cause the meter to stop or no metering at low consumption. There can also appear the effect of dependence on an external magnet (rust, scale, filings change their position). There may also be dents in the plastic of the gears when scale passes between them, which the “expertise” can interpret as “scratches from extraneous influence”.
Obviously for the same reason when installing a new or old (after calibration) meter, Mezhregiongaz workers do not clean the pipe leading to the meter from dirt and rust, although the passport (eg, smart meters SGMN-1) is a direct indication of the need to do this. My idea of cleaning a pipe without disassembling it is not an easy process. you need a special cleaner on a rope, a vacuum cleaner with a thin hose, and the desire to use it all in practice. In practice, none of the above is simply absent.
HOW CONTROLLERS DISABLE SEALS ON METERS
If during each inspection move the factory lead seals with the accompanying bending of the wires included in the seal, then after several inspections the wire will break and there will be “grounds” for the verdict: “the seal is in violation”.
(THAT’S WHY THE “MEMO” SAYS. KEEP A VIDEO RECORD OF THE CONTROLLERS ACTIONS, DO NOT LET THEM TOUCH THE COUNTER AND THE SEALS, DO NOT LEAVE THEM ALONE WITH THE COUNTER!)
Cunning TAPE-STAPE TAPE WITH HOLOGRAPHY It’s basically duct tape, with all the consequences that follow:. Afraid of sun, rain, frost. Badly held on surfaces untreated with special reagents. Under the influence of the sun the inscriptions fade, become hard to read. Under the influence of the sun in the heat there is a softening of the adhesive composition and the spontaneous peeling can happen Destroys at the slightest mechanical impact
In general, the TAPE SEALING WITH HOLOGRAPHY, used by Gazprom, does not meet the requirements of GOST R 51912-2002 “sealing devices”, in which even the Weak indicator seals must withstand exposure of at least 5 kgf (p.п. 4.4)
AND VIOLATION OF THE SEAL, INCLUDING SPONTANEOUS PEELING. THIS IS GROUNDS TO “ADDITIONALLY CHARGE” YOU FOR SIX MONTHS TENS OR EVEN HUNDREDS OF THOUSANDS !!
The “reason” could also be “meter malfunction”, including a reaction to a magnet being held up, or no metering at the smallest gas consumption (e.g. a boiler igniter), a scratch on the meter glass. You draw up a report and be kind. 100. 200 thousand. rubles (a pensioner has a pension of 8-10 thousand rubles) !!). (the case of the igniter. blatant! A warrant for an extraordinary verification would have been enough! is to beat with a club on the forehead, on which a fly was sitting. meter has a threshold of sensitivity. this is stated in the certificate, maybe the igniter consumes less than this threshold)
They will try to distract you. “bring the passport of the meter or boiler” etc. o “let’s measure the square footage of the house” and t.п. (in order to be left alone with YOUR meter.). Do not fall for this trick! While one is “talking your teeth” to you, the other may do something else uncontrollably!
A neighbor said that the inspectors sent her for the documents, she went (without looking, leaving the inspectors alone with the meter), and on return she was told that the seal is broken, and then you understand how it ended. BE VIGILANT, DO NOT LEAVE CONTROLLERS ALONE WITH YOUR METER, KEEP A VIDEO LOG, DO NOT LET THEM TOUCH YOUR METER AND SEALS.
Keep a log of visits. names, position, date, time, ID number, (it will be hard to remember later). Video or photo will then help expose fraudulent fake controllers.
IT IS VERY IMPORTANT! There is a credible case where two nice girls-controllers came, inspected the meter, wrote down the readings in the magazine, gave it to sign and left. Two or three weeks later, other controllers came, ignored the message about the recent inspection (already a violation of the law), found something to complain about (reacts to a powerful unnamed controller magnet), and be kind.
AND THE COURT SIDED WITH THEM, IGNORING THE REQUIREMENT TO PROVIDE THE INSPECTION LOG!! IGNORING THE FACT THAT THE STEEL RODS INSIDE THE METER ARE SIMPLY REQUIRED TO REACT TO AN EXTERNAL MAGNETIC FIELD!!
Everything would have turned out differently, if the recording from the DVR, the specific names of controllers, if the court is interested in the establishment of the TRUTH.
Appropriating itself “maintenance” Mezhregiongaz apparently did not calculate the consequences. Make a video of their “maintenance” (essentially just copying models and numbers of equipment), demand a Statement of work performed, then file a claim for damages, attaching copies of relevant sections of passports for your equipment (pre-informed with the lawyers). For example, look at the passport of a modern gas boiler. Most of the items a huge section of the “MAINTENANCE” coming locksmith just can not do.
In the laws already in force, just replace the word “TECHNICAL SERVICE” with “TECHNICAL INSULATION” with a THIRTY-FOUR DECREASE OF THE AMOUNT.
In more detail. See “The Gasmen’s Outrage” http://www.stihi.ru/2019/04/30/6903
Natural Gas Consumption Meter Counts: in Russia. m3 excluding pressure. (may as well be measured in parrots) in Europe. MWh (MWh) in the USA. mmBTU (in British thermal units of 1 million. BTU = 28.264 m3 = 293.1 kWh)
Imagine you bought two gas cylinders of the same type. One has a pressure of 1 atm. The other has 2 atm. The volume is the same, and from the second one, you will get twice as much heat by combustion.
AND OUR METERS COUNT THE VOLUME WITHOUT REGARD TO PRESSURE.
NOW YOU UNDERSTAND WHY THEY “DRAGGED IN” AN ADJUSTMENT FOR THE PRESSURE RATE OF THE GAS SUPPLIED TO YOU, REDUCING IT BY HALF WITHOUT CHANGING THE PRICE.
To calculate with your gas supplier, you need to convert using the FORMULA FORUMULA to standard conditions. you’ll be stunned by the result. It turns out that you have to pay ten times less ! (Read more in “What’s the price of firewood nowadays FINAL” http://www.stihi.ru/2019/10/19/8932″)
According to https://www.eprussia.ru/epr/70/4803.htm, about 10 billion m3 of associated gas is flared every year in Russia, which roughly corresponds to the annual consumption of natural gas by the country’s population. Such a wasteful attitude towards fossil fuels is unacceptable and calls for the immediate creation of new technologies to process light hydrocarbons There is something for scientists and the government to work on. Maybe it is time to attract people who will teach them to love their Motherland, their people and their nature, not as source of profit, but for real?
Meanwhile, the Abramovichs (owners of factories, palaces and steamships), including Gasprom, are spending hundreds of millions of dollars (the money of Russians, including poor pensioners) to buy foreign soccer clubs, yachts and so on.п.
A VOLUME ? And with their salaries, the price of gas is a mere fraction of a penny, and these people, what’s his name? get out.
A people? The People. invent wind turbines, new burners and stoves, low-cost hydrogen extraction, stockpiling firewood.
And Gazprom ? Gazprom, meanwhile, does not deny itself anything.
IT’S TIME TO REVISE THE GAS PRICE POLICY IN RUSSIA
AND FOR SOCIALLY PRIVILEGED PEOPLE, GAS SHOULD NOT COST MORE THAN 10 KOPECKS PER HOUR. FOR 1 kWh (80-100 m2 per person).) т.е. 1 per m3. AND FOR OWNERS OF PALACES THERE SHOULD BE A PROGRESSIVE SCALE. Up to 2.5 kW (a separate scale for industries). As a result, Gazprom will not lose anything and the citizens of the Russian state will feel that they are not forgotten about between elections.
By REGULATION OF GOVERNMENT REGULATION PP 54 of May 6, 2011. п. 157. d) if the gas pressure in the premises of the consumer does not meet the requirements established by the legislation of the Russian Federation; (read the full text in the resolution) Annex to the Rules of communal services to owners and users of premises in apartment buildings and residential houses n.п. 13. The gas pressure must be within the range from 0.0012 MPa to 0.003 MPa, deviation of gas pressure by more than 0.0005 MPa is not allowed, at a pressure different from the established by more than 25 percent, the amount of payment for public services determined for the billing period in accordance with the annex to the Rules, the amount of payment, calculated in total for each day of public services to improper quality (regardless of the meter readings) in accordance with paragraph 101 of the Rules
TO BECOME WARMER AND AT THE SAME TIME MUCH CHEAPER IN MULTI-STOREY BUILDINGS
In my opinion, the best and cheapest way. is to put one set of heat meters per entrance hall and divide the resulting monthly amount among the apartments in proportion to the square meters. AND IT MUST BE DONE AT YOUR REQUEST BY THE SERVICE PROVIDER. That is, the heating systems and at their expense on the grounds set out above. see PP N55 paragraph 7
IF YOU DO NOT DETECT A GAS SIGNAL Situation: Gas goes on, no flame, no smell or almost no smell (water has boiled and extinguished the flame).
Most likely there is not enough odorant in the gas. substance that has a specific pungent odor, which must be added in a certain proportion to the gas.
Maybe someone is “saving money”, maybe it’s a stretch, maybe it’s more serious.
This is a potential gas explosion hazard, at least increasing the probability of.
The “maintenance” interregional gas I wrote about above further increases that likelihood.
How will the automatics behave when the gas pressure is low. a big question, but the gauge is simply not provided.
The number of domestic gas explosions can be greatly reduced, if a very cheap (200-250 ) gas alarm (up to 1000 with a cutoff valve), I think our government is unable to solve this “problem”. will have to borrow from China. Too bad. This is a profitable, fast-paying project. These are jobs (needing hundreds of thousands of them) and safety of citizens not on paper, but in practice.
Strange situation: A car owner can change a tire, adjust the engine, etc. on his or her own.п. which can cause an accident, and the gas user has no right to lubricate the gas valve, sniff the air or use soap and detect leaks by himself. Many patients (e.g. diabetics) determine their own sugar levels with the help of the device and give themselves injections. etc. There are lots of examples. I PROPOSE to include in the law that if the consumer has a secondary or higher technical education, if he writes a commitment to self-service his gas equipment (if necessary involving specialized service centers), then he is exempt from forced “maintenance” by “Uncle Vasya” with a wrench, screwdriver, soot and soap. for which you can leave the “TECHOSMOTE”, with the drawing up of the act and reduce the price by an order of magnitude (10 times). As it is now “TECHNICAL SERVICE” and the existing price for it. it is simply looting.
Sgmn 1 G6 How to Stop
Gas meter SGMN 1 g6 how to stop it learn by tel. 89185220077 write on WhatsApp.
How to stop the gas meter СГМН g6, ВК g6 and what is better to buy
I show you how to stop the gas meter with our modification. What is the best gas meter to buy and.
SGMN-1 G6 how to stop the magnet 45×15
READ CAREFULLY. SGMN-1 G6 modified (not sold in the store) with a 45×15 magnet in the kit.
Seal SGMN 1 G6 / Stop the gas meter
Website: http://пломба-сгмн./ If you have any questions, get advice before you buy stopping seals.
Gas meter SGMN-1-2-2 G6 or SGMN-1 G6
Belarus counter SGMN-1-2-2 G6 right axis distance 200 mm. GOST 5542-87 or liquefied gas vapor by.
Stopping a gas meter SGMN 1 G6 with a magnet
Modernization of water, gas and electricity meters. The variants of stops are various. Further details by phone: 8904663371.
Disassembling gas meter.
The first video of the section disassemble and see what’s inside.
It is impossible to stop the gas meter!Here is a proof!!Don’t even try.
Attention!! vinyl record player (PLASTINES!) buy http://ali.pub/50kkv9 Bluetooth speaker http://ali.pub/50kl13.
How to stop the gas meter SGMN 1 G6 device is converted to stop the magnet
You can buy on the site gazoff.ru.
Reveal expensive meters.
Planned checks to detect “tricky” gas meters began. #dorobotannyesmeters #stop gas meter.
Stopping the gas meter SGMN 1-G6
Become the owner of modified gas meter СГМН 1-G6 and get gas savings up to 90% Attention! Promotion!
Magnet for gas meter СГМН 1 G6
Buy a magnet on the gas meter. https://msk3.bars-magnity.com/magnity-na-schetchik-gaza.
The consequences of stopping the meter with a magnet
How did the attempt to stop the gas meter with a magnet end? How I stopped the gas meter, and what is it.
How to stop the counter SGMN 1 G6 with a magnet 89185220077
Stopping the counter SGMN 1 G6 With an ordinary counter it will not work! Gas meter needs to be reworked. Order from.
Gas meter what is useful inside
Meter#Utility#Disassembly gas meter and its usefulness from disassembly.
How to stop the gas meter film ВК G10, ВК G16, ВК G25, ВК G6, ВК G4. 79174887717
How to stop the gas meter BK G10 with film Stopping of gas meter with film, BK G10 (4, 6, 10, 16, 25).
How to stop the gas meter СГМН-1 with an antimagnetic seal. Tel:. 8-968-702-25-52
Gas meter СГМН-1 with magnet in the kit 8-968-702-25-52. Delivery to any region of Russia, on sale such meters.
How to stop the gas meter SGMN 1 with a neodymium magnet
stopping the SGMN-1 G6 with a neodymium magnet.
How LEGALLY to reduce the flow of GAS without stopping the meter
My store for gasmen https://www.instagram.com/budgaz_shop/ Instagram. https://www.instagram.com/bud_gaz/ My.
Stopping the gas meter SGMN-1 G6 with a neodymium magnet
This meter is not designed to meter energy resources for which you charge money, only as a.
How to stop the SGMN-ET G-6 with a control panel
Apply, a call within Russia is free: 8-800-250-11-97 mail [emailprotected] Website https://shtrafy-stop.com/
Gas meter SGMN-1 G6 stopper with magnet
In the video there is a demonstration of stopping the metering with a magnet for the gas meter SGMN-1 G6. 7 917 485 54.
Seal license plate on the counter SGMN 1 G6
Seal plug on the counter SGMN 1 G6, numbered with your numbers, individual performance, also with other.
The first way to save money is to reduce consumption, which is very problematic. Gas stoves today are installed in most apartments and used for cooking. Alternatively, you can use an electric stove, but then the costs can only increase.
The second way is to install a special meter https://schetchik001.ru/ with a magnet. It contributes to slowing down the counter mechanism. As a result, real gas consumption may be higher than the documented consumption.
