How to load the dishwasher
Learn how to load the dishwasher correctly for best results. Our tips can walk you through all aspects of using your dishwasher, including prepping your dishes, avoiding overloading them and finding the best placement inside the machine.
No high-tech dishwasher or heavy-duty detergent can give you dishwashing results if you load your dishes incorrectly.
Luckily, learning how to load a dishwasher is easy. all you need to do is stick to a few guidelines. Our simple tips can help:
How to load a big dishwasher?
Trays, pans, sauté pans, etc.п. put them in the bottom container. It is recommended to arrange a separate washing without glass, porcelain and crystal products. It is better to wash them in intensive mode, in hot water. place pans and trays on their sides, turn pans upside down or place at an angle. Thanks to a reasonable arrangement, the water jets will reach each product, there will be no obstacles to access the top.
Remove the removable handles of the pans. Do not let them touch the walls of the cooking cabinet. When placing large dishes in the bottom basket, the main thing is not to turn them upside down, otherwise the water will not reach the top. If you do however decide to place your pans in this way, do not place them on top and use the “half load” mode. This way you save on water and electricity consumption. Putting pans on the sides of the lower basket.
Let’s see how to load the dishwasher correctly. Arrange the dishes in the lower compartments of the dishwasher. Make sure they are positioned in the right direction, i.e.е. hollow side toward the center. If the compartments are slanted, then the plates should be tilted down and also turned toward the center with the hollow side. Most dishwashers have this arrangement:
- The upper basket holds mugs, glasses, goblets and small dishes.
- Lower basket. for pots, pans and plates.
- Bucket, or plastic tray. for knives, forks, spoons, and so on.
This is because the pipes and rotating arms spray water from the middle to the outside. Water comes down from the top and out and vice versa. Make sure that the dishes are separated from each other so that the water jets can easily rinse them out.
All glasses and glasses should be placed slightly inclined so that the water spreading from the bottom can easily reach their bottoms. Arrange the cups in a staggered arrangement so that detergent can wash easily on all surfaces, inside and outside, and drip down freely.
This layout makes much better use of the cup compartment space than a straight layout.
Place plastic containers on top of the machine. It is better not to place them in the lower compartment, because the heating element is in the very center and when heated plastic is particularly prone to deformation.
To properly load the main dishes, you need to sort them. Pots and pans should go in the bottom compartment, but make sure not to overload it. Wash with care the pans with Teflon coating, it’s better to wash such pans by hand.
It should be noted that pots made of aluminum, and other aluminum dishes should not be washed in the dishwasher! Aluminum gets darker with washing, and loses its usual appearance.
Place cutting boards and large bowls on the outer perimeter of the lower compartment if they cannot be placed in the plate slots. But it is still better to wash cutting boards by hand because wood is prone to warping at high temperatures.
How to load forks, knives, spoons, etc. п.? Place cutlery in the dishwasher pail, keeping the handles facing down. Especially large and sharp knives should be washed by hand because they tend to blunt easily. Other kitchen tools or tools with wooden handles should also not be washed in the dishwasher.
All forks and spoons should, if possible, be separated from each other and from the rest of the utensils in such a way as to be easily accessible from the water. The more thoroughly you distribute the cutlery, the cleaner it will be at the end of the wash.
The various ladles and ladles should also be placed hollow-side down on top. This way they can be cleaned better thanks to the downward flowing jets.
For crystal and glass glasses, use the special hooks located in the upper compartment of the dishwasher. In some models there are such fasteners at the bottom. They perfectly support the stem of the glass to prevent damage and scratches to the glass.
How to load your dishes correctly in the dishwasher
Do not rush to use the appliances you have just purchased. Firstly you need to learn how to load your dishes into the dishwasher. How the items are placed in the chamber depends on how well they will be cleaned.
Placing dirty dishes in the dishwasher with specific rules in mind
Correct loading of cutlery
These items should be placed in a small tray or basket in the interior of the bin. Properly place such dishes in the dishwasher, alternating forks and spoons so they do not clump together. Knives should be placed with their blades pointing downwards.
modern models of a washing machine have a special tray for cutlery in the upper part of the machine. Then spoons, knives and forks are stacked horizontally. This saves space inside the unit and allows for quality washing.
You are not allowed to wash ceramic or sharp knives in the dishwasher, or any dishes with wooden inserts. Such items should only be washed by hand.
How to use the dishwasher correctly
The dishwasher operates correctly to guarantee long and trouble-free operation and to keep crockery sparkling clean. How to load the dishes? What utensils should not be washed in the dishwasher? What detergents and rinses to use? What’s the best mode for dirty dishes?? Finally, what do the common error codes say about? You will get the answers to these questions in the article.
Household dishwashers, whatever their brand, have a similar design. Their “guts” are accessible through the front door. Behind it there is a “two-story” hopper with baskets and shelves for dishes, cups and cutlery. Water dispensers are usually placed in the bottom and top of the chamber. Salt compartment at the bottom of the hopper. And in the door there are compartments for detergent and rinse aid.
It is necessary to “run” the dishwasher in idle mode before initial start. A dishless rinse will remove small debris and grease residue, help check the quality of the plumbing connection for possible leaks. If the dishwasher is installed properly, there are often no problems at the idle program stage, and you can move on.
How to load your dishes correctly?
The basic rule for loading your dishwasher is to place your dishes in the machine so that the water washes them on all sides and flows down unimpeded. If your dishes pile up or stand on end, they might still get dirty after your bath. There should be easy access to the surface of each pan, dish or glass inside the dishwasher. In the bottom basket we usually put large kitchen utensils like pots, pans, pans, large plates. The dirtiest dishes are put there too. the water flow is stronger at the bottom and the dishes are washed more thoroughly. Dirty water also runs straight down. bypassing the already clean dishes. Pots are placed upside down in the dishwasher reservoir, plates, bowls and tureens. inside towards the center and at a slight incline to allow the water to run off better. Bigger dishes and plates are placed on the sides of the lower basket; smaller items are placed closer to the center.
The upper basket is a shelter for cups, glasses, relatively small saucers, etc.п. Often, the upper tray provides shelves for knives, holders of small items, and other devices for firm fixation of dishes (so they will remain stationary during bathing procedures). It is also important to make sure that delicate items of thin glass do not come into contact with each other and their “neighbors” in the basket. Otherwise they can break.
Especially for forks, spoons and knives the cutlery tray is used. Its name speaks for itself. it’s a small basket with slots for cutlery.
If the baskets have special dish holders, use them for their intended purpose. For example, it is common to place plates and bowls in sections (if possible, one by one). An equally important detail. the placement of high objects that can interfere with the normal operation of the beater-sprayer. When oversized dishes need to be washed, the upper basket can be removed and the cycle can be started with one lower basket.
How to Load A Dishwasher! (Clean My Space)
How the dishwasher works?
Dishwasher work is a great substitute for manual labor. It will save a lot of hours that you can spend on more pleasant activities than washing dishes. Still have doubts about the effectiveness and necessity of such appliances? We’ll tell you how your dishwasher operates, what happens when you press the start button. You will find that it is the best alternative to a hand-wash for any family.
If you’re wondering how to use the dishwasher correctly and what mistakes you should avoid when loading your dishes, here are some basic answers to these questions. Watch our short video below to learn about the most common mistakes when loading the dishwasher and avoid them.
You have questions about the operation of your dishwasher or you find a problem? Call Bosch Customer Service toll-free at 8 (800) 200 29 61, or book a visit at your convenience with our online form.
Choice of Mode
It’s important not only to properly prepare your appliances for use, to put the dishes in the right place, but also to choose the best wash mode. Как правильно подобрать режим мытья рассмотрим на примере техники Bosch, которая имеет 4 режима:
- 70°C. for large containers or very dirty dishes and utensils;
- 50°C for dishes with medium soiling;
- 45°C. to wash glassware or items that are lightly soiled;
- Rinse and rinse. recommended when food is stuck to the dishes.
When washing delicate garments select the “Delicate wash” option. Quick washer mode saves water, electricity and time.
