How to remove traces on an induction stove

How to care for an induction hob

Due to their technical and operational properties, induction plates are considered practical in everyday life. However, given the regular exposure to the aggressive external environment on the glass.Ceramic surface, it has to be cleaned quite often and washed. There are both special and folk methods of removing various contaminants. In order for the stove to serve for a long time by faith and truth, you need to know all its features and not to bring the surface to the formation of complex and difficult spots. And if this happened, then how and how you can clean the induction plate will be described in the material further.

Induction slabs have become popular not only due to their properties of heat transfer without heating the surface, but also due to their stylish and aesthetic appearance. Glass.Ceramic hob that provides perfect smoothness and mirror. This material is impact.Resistant, reliable and heat.Resistant, but it is easy to scratch and damage it with a sharp object, which must be taken into account when servicing induction electric furnaces.

So that the cleaning of the slab does not turn into a problem every time, it is enough to observe a few simple recommendations for the care of the hob.

  • Wipe and clean the oven only after it cools down. Otherwise, traces of the soap product may remain on the stove. In addition, there is a probability of burning.
  • It is best to wipe the stove before cooking, no matter how strange it sounds. Otherwise, all the pollution available on the plate will be even more than boiled and dried up to the surface.
  • In order not to damage the coating, you need to carefully monitor the cleanliness and smoothness of the bottom of the dishes used. If it is uneven, rough, or crumbs stuck from the table, that is, there is a high probability of scratching the surface.
  • It is necessary to control so that there is no moisture or drop on the surface after washing. Be sure to wipe them with a dry or paper towel. Otherwise, stains and scale will remain.
  • It is undesirable to use the same sponges and rags for caring for an induction stove as for washing dishes, furniture, windows. Most likely, after such cleaning, stains will remain.

How to Clean an Induction Cooktop

Daily care

It is best to care for an induction stove every day. Then she will always delight not only her innovative technologies, but also the appearance.

Important! Daily care is best done with a sponge, fabric, paper towels and detergents, in the role of which a solution of liquid soap, dishes for dishes or windows can act.

To clean the stove, you need to do the following manipulations:

  • Wait until the hob cooles;
  • Wet a sponge or soft tissue in a soap solution and wipe the surface;
  • Wait a few minutes until the detergent dissolves pollution;
  • Wipe with a clean damp cloth to wash off soap along with the remnants of fat and scale;
  • Discharged to be polished with a dry cloth or paper towel.

Advice! Note to housewives can recommend additional funds that are designed specifically for quick and easy removal of stains, divorces, fat and other pollution. These are microfiber napkins, which have suitable properties: very soft (do not scratch the surface), well absorb moisture, wear.Resistant.

You can also take a melamine sponge into service. It has a number of unique advantages that allow you to easily and simply cope with almost any pollution, without making any effort. It is enough to wipe the surface with a stain with a damp sponge without the use of additional detergents.

Capital cleaning

For serious and already burnt to the surface of pollution, more radical methods will have to be used using scrains (metal, rubber or silicone) and special products (sprays, creams or gels) for cleaning glass.Ceramic plates. First, you can try to moisturize the entire surface with the detergent, and put a fabric cloth moistened with this solution on especially problem areas and leave to “sour” for several minutes. After that, you need to wipe everything with a damp cloth, and carefully clean the products of the products with a scraper. At the same time, you need to keep the shoulder blade at an angle of 30-45 ° C so as not to scratch the hob.

If the detergent solution has lost complex pollution, then special tools for cleaning induction plates will help to wash it from the carrier. Using the operating manual, apply the product to pollution, wait a few minutes and remove the remaining solution with a damp sponge or cloth.

On a note! In addition to the rapid and efficient splitting of pollution, special solutions for induction electric stoves form a protective film on the surface, which for a long time will protect from the influence of the external environment. But it is necessary to wash the stove with such means in special gloves to protect your hands, since they contain quite aggressive chemical compounds.

See also  How to drown a stove from peat briquettes

Struggle with spots on glass ceramics

Unfortunately, becoming a happy owner of glass ceramics, I immediately began to operate it, not making it difficult to get acquainted with the rules for handling glass.Ceramic surfaces. And immediately made the most rude mistakes from the point of view of the manufacturer. I set to boil salted water for pasta in an aluminum pan and allowed it to boil on the stove. Of course, I did not expect such a result- a circular spot of a whitish color, rough to the touch.

I immediately began to get rid of him with the help of washing dishes. This, aggravating the situation. Realizing that something was wrong, I left everything as it is and decided that now I will have to live with this outrage. Even for a whole week (!) I continued to use this burner. And finally, I found time to climb on the Internet and listen to tips on cleaning and proper operation of glass ceramics. One. You can’t: use aluminum and plastic utensils. Allow food to “boil” on the stove (especially sweet). Wash the surface with dishwashing products, stain carriers, ovens. Leave the spots out. Put wet or very cold pots on a hot surface. Drop sharp and heavy objects. Clean the surface with abrasive sponges and funds with them in the composition. Wash the plate with the same sponge with which you wash the dishes. 2. You need to clean: using special cleaning tools not just email. Plates, namely glass.Ceramic. You can use products for cleaning products made of high.Quality steel (not containing abrasive) from folk remedies can be used by food soda. I acquired not cheap means of Holland’s production recommended for glass ceramics and became Bosch. First I started rubbing a glass.Ceramic product. I had to make a lot of efforts. Terlla and washed off for 10 minutes. The roughness (aluminum carpet) became much less, but the whitish spot was still visible. The result did not satisfy me. Then I found on the Internet that the manufacturer in this series also offers a special reinforced formula for removing just such spots. But she was not on sale. Then I applied a tool for steel. I think I would suffer less if I started with him. The roughness almost all left, and whitishness could be seen, if only to know where it was.

The main thing is not to forget to wash off well with a damp, clean, soft cloth the remnants of the product. So from experience I believe that a stainless steel remedy was more effective and you can limit yourself to it. I do not indicate the brand that my material is not considered hidden advertising. I would be very glad if someone shares his personal experience, t. To. It will be interesting not only to me. And I promise to try out.

Care recommendations

  • Do not use hard brushes, metal sponges, abrasive and aggressive cleaning substances. Scratches, cracks remain from them, which in the future will cause damage to the entire coating.
  • Highlight your, separate, sponges and napkins for cleaning glass ceramics. They will not be able to wash the dishes. This will prevent a fat panel on the surface, as well as small particles of food, which, when subsequent operation, the stove will not only burn, but will lead to bleaching of the coating.
  • Apply a cleaning substance to a wet sponge, and not on the hob itself.
  • Refuse to use the oven caring. They are not suitable for glass ceramic. By the way, it is better not to take a cleaning product for dishes. After it there are stains and spots of bluish shade. Sometimes you can use the liquid to wash the glasses.
  • Complete the slab cleaning the surface of the leisure. This will avoid ugly divorces, and metal elements will protect from rust.

The stove will always look clean if, after each cooking, wipe the surface. Fresh traces, spots are much easier and faster to remove.

Conventional cleaning technology is as follows:

  • Moisten a soft sponge in a soap solution or apply a special tool for washing glass ceramics to it. Wipe the hob thoroughly.
  • Use a wet sponge, collect the remnants of the detergent.
  • Wipe the surface with a dry cloth or polish a paper towel.
  • If necessary, with a detergent, you can process the surface again, leaving it to act for 30 minutes, and then rinse.

Note: It will be possible to remove stains if you spray the solution from ammonia on the plate, and then thoroughly wipe the drying surface.

Induction panel service rules

Induction slabs have become popular not only due to their properties of heat transfer without heating the surface, but also due to their stylish and aesthetic appearance. Glass.Ceramic hob that provides perfect smoothness and mirror. This material is impact.Resistant, reliable and heat.Resistant, but it is easy to scratch and damage it with a sharp object, which must be taken into account when servicing induction electric furnaces.

remove, traces, induction, stove

So that the cleaning of the slab does not turn into a problem every time, it is enough to observe a few simple recommendations for the care of the hob.

remove, traces, induction, stove
  • Wipe and clean the oven only after it cools down. Otherwise, traces of the soap product may remain on the stove. In addition, there is a probability of burning.
  • It is best to wipe the stove before cooking, no matter how strange it sounds. Otherwise, all the pollution available on the plate will be even more than boiled and dried up to the surface.
  • In order not to damage the coating, you need to carefully monitor the cleanliness and smoothness of the bottom of the dishes used. If it is uneven, rough, or crumbs stuck from the table, that is, there is a high probability of scratching the surface.
  • It is necessary to control so that there is no moisture or drop on the surface after washing. Be sure to wipe them with a dry or paper towel. Otherwise, stains and scale will remain.
  • It is undesirable to use the same sponges and rags for caring for an induction stove as for washing dishes, furniture, windows. Most likely, after such cleaning, stains will remain.
See also  Metal stove for a garage with their own hands

Daily care

It is best to care for an induction stove every day. Then she will always delight not only her innovative technologies, but also the appearance.

Important! Daily care is best done with a sponge, fabric, paper towels and detergents, in the role of which a solution of liquid soap, dishes for dishes or windows can act.

To clean the stove, you need to do the following manipulations:

  • Wait until the hob cooles;
  • Wet a sponge or soft tissue in a soap solution and wipe the surface;
  • Wait a few minutes until the detergent dissolves pollution;
  • Wipe with a clean damp cloth to wash off soap along with the remnants of fat and scale;
  • Discharged to be polished with a dry cloth or paper towel.

Advice! Note to housewives can recommend additional funds that are designed specifically for quick and easy removal of stains, divorces, fat and other pollution. These are microfiber napkins, which have suitable properties: very soft (do not scratch the surface), well absorb moisture, wear.Resistant.

You can also take a melamine sponge into service. It has a number of unique advantages that allow you to easily and simply cope with almost any pollution, without making any effort. It is enough to wipe the surface with a stain with a damp sponge without the use of additional detergents.

Capital cleaning

For serious and already burnt to the surface of pollution, more radical methods will have to be used using scrains (metal, rubber or silicone) and special products (sprays, creams or gels) for cleaning glass.Ceramic plates. First, you can try to moisturize the entire surface with the detergent, and put a fabric cloth moistened with this solution on especially problem areas and leave to “sour” for several minutes. After that, you need to wipe everything with a damp cloth, and carefully clean the products of the products with a scraper. At the same time, you need to keep the shoulder blade at an angle of 30-45 ° C so as not to scratch the hob.

If the detergent solution has lost complex pollution, then special tools for cleaning induction plates will help to wash it from the carrier. Using the operating manual, apply the product to pollution, wait a few minutes and remove the remaining solution with a damp sponge or cloth.

On a note! In addition to the rapid and efficient splitting of pollution, special solutions for induction electric stoves form a protective film on the surface, which for a long time will protect from the influence of the external environment. But it is necessary to wash the stove with such means in special gloves to protect your hands, since they contain quite aggressive chemical compounds.

Rating of the most popular funds presented in the market

It should be noted that, despite the abundance of household chemicals intended for work in the kitchen, the purpose of which is not so much care. All products, regardless of the manufacturer, have one common line. The presence of silicone or silicone oil in the composition. Chemical. Oligorganosilicans. The main purpose of the component is the creation of the finest protective film, which simplifies the removal of fat spots and prevents further pollution.

Clean your Burnt Glass Hob: Hob Scraper Razor this Homemade Cleaning Solution for Stove Tops

Three of the best funds, according to customer reviews, is represented by the following products.

Selena-Extra

A cleaning composition, which, according to the manufacturer’s certification, is able to cope with any pollution and does not irritate the skin of the hands, although it is recommended to work in gloves. Previously, before application, you need to shake. The product helps to remove even old fat spots without applying special physical efforts. A small amount of silicone in the composition does not provide sufficient polishing the surface of the slab.

Domax

A tool that is ideal for daily cleaning. Very well removes stains, simple spots, but cannot cope with already dried pollution, so the use of additional means is required. This product contains much more silicone oil, so in its effect it is more reminiscent of a polish for furniture.

Dr.Beckman

Composition that helps to quickly cope with fresh pollution. If you need to remove dried spots, then you must first apply the product and leave for several minutes. Does not contain potent chemistry, so irritation of the skin of the hands is minimal. With regular use, it creates a film on the surface, which prevents the rapid formation of pollution.

Folk remedies for cleaning induction surfaces

Our domestic housewives have found many alternative ways than to clean the kitchen slab at home. There are situations when you need to wash the stove right now, but there is no special chemistry at hand. Then folk remedies come to the rescue, which repeatedly confirmed their effectiveness.

Alcohol is ammonia

Ammonia is part of various cleanings for washing windows, as it has the necessary properties to give a shine. Therefore, if this substance is in a house in a pure form, it is also appropriate to use it for washing glass ceramics. To do this, the ammonia must be diluted with water in a proportion of 1 to 5 and applied to the surface with a fabric cloth or from a sprayer. If the stains are old, it is better to leave the solution for 5-10 minutes so that it can well corrode pollution. After that, wipe the right place with a soft fabric, and the stove will shine again. According to the reviews of the housewives, this is the best tool for cleaning the slab from the escaped milk.

See also  How to make a stove in the house with your own hands

Butter

Very well vegetable (sunflower or olive) oil to remove various spots helps. To do this, apply it on a rag and attach it to the place of pollution, leaving for half an hour. After that, it is necessary to wash the surface with a detergent, and then wipe it with a clean and damp sponge.

How to clean different pollution

IMPORTANT! In order for the cleaning of the hob is as effective as possible, you need to take into account the type of pollution and its origin. Based on these data, we select a way to remove dirt.

From the haze

Quite often, the drops not wiped off from the surface of the tile and not cleaned pieces of products are turned into a carpet. If you have launched the problem, then you can’t do without a rubber scrap. We will have to soak the burnt residues for 10-40 minutes in the wash (or in a specialized cream for induction plates), and then, after the fiber softens and moves away a little, just carefully clean them with a scrap. At the end of the work, be sure to remove the remnants of cleaning products and dirt with a damp sponge and wipe everything dry with a paper towel.

Read more about how to clean a ceramic slab from a carbon fiber at home, read here.

IMPORTANT! When using a rubber scrap, always moisturize the surface before starting cleaning, so that cracks or scratches do not appear on the surface.

To remove fat from the hob is suitable for a conventional dishwashing tool. It perfectly dissolves fat.

However, it is better to entrust such contamination with specialized sprays, gels or cleaning creams for induction tiles. They work much more efficiently and will not harm the hob.

How to clean the oven inside of fat, read in this article.

Sugar

Sugar particles from induction tiles need to be removed very carefully (this also applies to the products that it contain):

These two rules relate to other fusible materials like polyethylene, plastic. They quickly melt on a hot surface, and then bake and stick in it tightly.

To remove sugar, you need to use capital methods of cleaning: specialized cleaning agents, rubber scrapers, dishwashing products, etc.D.

Divorces and plaque

On the glossy and perfectly even surface of the tiles there are stains. This is fine. But when these stains are launched and not cleaned on time, they turn into a rather thick layer of raid, which cannot be removed by ordinary humid daily cleaning.

IMPORTANT! The windows for cleaning windows best removes the stains that appeared after using tiles. These products contain chemical compounds that do not leave stains or divorces after drying out.

Just spray the surface of the tile with a solution, then wait for some time and wipe dry with a soft clean cloth or paper towel.

How to clean the hood in the kitchen from fat read here.

What can be used

Attention: what you are trying to clean the induction stove should be clean and not used for other economic purposes.

Clean the induction surface

Not all housewives have the opportunity to monitor the stove every day, as a result, they have to make serious efforts to clean the surface.

To remove organic pollution, they will have to be soaked.

The fabric is wetted in a solution of detergent and distributed along the hob.

A few minutes later the spot quickly retire with a scraper.

Try to use detergents as little as possible, as they leave stains on the surface.

Attention! The main enemy of induction plates is sugar. Several spots that have fallen on the sensory surface must be immediately removed with a damp sponge and treated with a professional gel.

Scraps will help to remove fat formations, which delicately processed pollution. For cleaning, melamine sponges are often used. They are practical and quickly get rid of spots of any complexity.

Professional tools for cleaning glass ceramics will not only clean the product, but also create a protective film to prevent scratches and some spots. If there is no special solution at hand, then any non.Abrasive gel can be used.

It is not recommended to fill the cleaning product on the hob: they only need to moisten a sponge or soft cloth.

Pure and sparkling hob surface. Decoration of any kitchen. Using improvised household funds and professional chemistry, you can easily and quickly get rid of any spots on glass ceramics. Compliance with some recommendations will extend the service life of household appliances.

About the author

| Denial of responsibility | Contacts |RSS