How to set the route to the Xiaomi vacuum cleaner

How to connect a Xiaomi vacuum cleaner to the phone

Modern robots vacuum cleaners stand out favorably among other models with their wide functionality. However, in order to completely open it, the device must be connected to a tablet or smartphone using a special application. Step-by-step instructions are often not attached in the documentation, and therefore consider below the algorithm that will help to explain how to correctly connect the Xiaomi robot permits to the user’s phone.

Before you start connecting a vacuum cleaner to a mobile phone, you should configure the interaction of the device with its recharge base. This process includes several stages:

• The docking station is connected to the network and removed the excess part of the cable, placing it in the nest specially provided for this.
• They pay attention to the correct position of the base: there should be a sufficient amount of free space around it (in front. At least 1 m, on the sides. 0.5 m). With the correct installation of the rear contacts, the bulb that is located on the case will begin to blink.
• Lack of flashing (light bulb shines without a break) indicates complete charging the battery. This makes it possible to start the operation of the vacuum cleaner if necessary. To do this, just click on the launch of the device.
• The color of the bulb indicates the completeness of charging the battery: white. Sufficient charge, yellow. No more than half, red. Less than 20%.

Before cleaning, all small items and wires should be removed from the surface removed, since they can interfere with the movement of the robot lobes.

The benefits of Mi Home

The Mi Home application is an international program designed to manage the Smart House system devices produced by Xiaomi brand. These devices also include the Xiaomi Vacuum Mop Essential vacuum cleaner. In its absence in the list of available units, adding a model to the application will not be difficult to manually.

The advantages that the user receives when installing the Mi Home application:

• The ability to control the actions of a robot permutal from any place.
• Access to the data of a certain model of cleaning technique, which will allow you to study all its functional features.
• Control over the technical condition of each part of the Robot Permis, which will allow one or another malfunction in time.
• The ability to track the level of battery charge.

Before you configure the Xiaomi Vacuum Mop Essential robot, it is important to correctly synchronize it with the application on the phone.

Flashing

The task is how to configure the voice on the Roborock and Vacuum Cleaner models to set up a voice, since it will require a complete flashing of the device. However, this method also carries additional advantages, for example, there is a sufficient set of various voices that will “communicate” with the device:

• Winnie-Pooh’s voice;
• The package “Leather bastards”, which is allowed only for category 18, since it contains obscene vocabulary;
• A male voice that will turn to the owner of the device with refined and phrases, like “Your Majesty”, and this package is the most loud;
• The voice of the robot from the Star Wars;
• Alice from Yandex, who will voice the vacuum cleaner, together with the animated hero of the Kusey house;
• Package with phrases from popular Soviet films.

Before you find out how to configure the language on the Xiaomi robot, it is important to decide on the moments that are subject to voice acting. In the standard version, the device at the request of the owner will accompany the following steps of work:

• Start of cleaning.
• Creation of a map.
• The formation of a virtual wall, possible docking with it.
• Return to the charging station.
• The process of cleaning the surfaces from garbage.

It is important to take into account that such packages are not available for any Xiaomi IROBOTELLY PLAND. How to set up Russian depends directly on the modification.

The most common method of firming the device can be carried out using a smartphone. Two installation options are possible here too.

Automatic definition of parameters

The parameters mean the determination of the IP address and token-the vacuum cleaner identifier, which is assigned to it when creating, it does not change if you do not carry out the reset to factory settings. Not knowing token and ay-pi address, Russifying the phone will not work.

The algorithm, how to set up Russian on Xiaomi robot vertebrae in automatic mode:

• Download application xvacuum firmware 4.0.0 from the Play Market or Apple Storah, depending on the model of the smartphone. It is not necessary to run it yet. Then you should download the selected voice package, it should be with the extension.PKG.
• On the device itself, press two buttons located on the top panel simultaneously, hold for 3-5 seconds. During this time, Wi-Fay settings will be reset.
• Next, you should turn off the cell data on the phone and connect Wi-Fi precisely the vacuum cleaner itself.
• Run the XVACUUUM Firmware 4 program.0.0, selecting the Flash Sound tab in the main menu. Then you just need to select a package that was downloaded before that.

In conclusion, it remains only to wait for the full installation. This can take a certain time.

Manual determination of settings

If it is impossible to automatically determine the Xiaomi vacuum cleaner to be automatically determined, before you configure the Russian language, you will have to set these parameters manually.

You can find out these data by the following algorithms:

• Delete the original Mi Home application, setting it to modify Vevs developer.
• Add the device model to the opening application. In the profile opened, select the “Access” tab, and then “Access to the device”. Token will be indicated under the name of the model. It will be enough to just copy it.
• Next, you should find out AI-Pi, for which in the original menu of the Mi Home application go to the “User Manual” section. The necessary data will be presented in the information “serial number”.

Enter the data must be entered in the XVACUUUM Firmware Appendix in the Settlement section, after which they should be saved and reload the program. Further stepping actions are similar to the algorithm in the previous section.

There is also a way how to set up Russian on Xiaomi robotes using the Win-Mirobo-1 program.One.0-Min for PC based on Windows. However, this algorithm is quite complicated, it is more convenient for an ordinary user to reflash the device using smartphone applications.

How to connect a Xiaomi vacuum cleaner to the phone (Mi Home)

Congratulations on the purchase of a Xiaomi robot. Below you will learn how to connect the Xiaomi vacuum cleaner to Wi-Fi through the application on Android or iPhone. And at the end of the page, the download files: synchronization of the vacuum cleaner with the application and instructions for robots-blankets (by clicking on the link, select your model).

Connection

To connect the Xiaomi vacuum cleaner to the iPhone or Android, you will need Mi Home app. With which from your smartphone through a Wi-Fi network you will be able to control a smart vacuum cleaner. Links for downloading from official resources (open in a new tab):

We advise you to download through Wi-Fi, files weigh a lot, especially for iPhone and iPad.

Smartphone connect to Wi-Fi network at frequency 2.4 GHz. Go to the Mi Home app, get back or register (if for the first time). Click on plusik in the upper right corner “.

Before connecting the robot vacuum cleaner Xiaomi Mi Home, make sure that it is charged, t.To. At the first inclusion, it may be updated.

Now turn on Bluetooth, and look for the busting nearby. If for some reason it was not possible to automatically find the device, then you can do it manually. In the “Household Appliances” tab, select your model. If it is not on the list, then change your region to “China”.

Next, ask for a reset of the reset, for this, click 2 of 2 buttons or 2 extreme out of 3, depending on the model; Wait for a voice signal in Chinese or Angerian. Everything, wi-fi huts are dropped.

Choose your Wi-Fi network in the next tab, excellent. Then synchronization and renewal of a smart vacuum cleaner will be completed. Well, then the settings to taste.

Functional

On the main screen of the application, the center is displayed in the center, drawn up by a blanket and its current place of position. In the upper part, the name of the vacuum cleaner and the current cleaning mode.

Information about the distance traveled, temporary cleaning range, battery charge level at the bottom of the screen.There you can start or stop cleaning.

• Button “go”. Send the robot to a specific place for unscheduled cleaning.
• Button “DOK-station”-send to the dock for charging.
• The “Clean” button launches sequential cleaning.
• Button “zoned cleaning”. Select a specific objective area of ​​the room that needs to be removed.

There are three points in the upper right corner, they open additional settings.

Additional settings

• “Timer”. Set the time interval in the range of which you can clean automatically.
• “Voice and volume”. A change in voice bags and volume of voice notifications.
• “Cleaning mode”-choose the intensity of the cleaning of the room: quiet, turbo, balanced and turbo mode.
• “History of cleaning”. Recording information about cleaning. Removen area, beginning and end of cleaning time.
• “Remote control”. Manual control, if necessary or have fun.
• “Card conservation mode” Adding virtual walls.
• “Carpet mode” specifically for improved carpet cleaning.
• “DND mode (do not disturb)” in the period you have chosen, the vacuum cleaner will not complete the cleaning and issue voice notifications.

Now you know how to connect a Xiaomi vacuum cleaner and all its functions.

Good to know

• Can be controlled with the help of the voice assistant “Alice”.
• If it is not possible to connect the Xiaomi vacuum cleaner to Wi-Fi, the document describes the tips below how to solve this problem.

⚙️ How to connect the Xiaomi Mi Robot Vacuum Mop P to the smartphone

Modern robot sprayers have great functionality, which is provided through the branded application. Today we will tell you how to connect the detergents of Xiaomi Mi Robot Vacuum Mop and Mi Robot Vacuum Mop P to your gadget.

To connect you will need Mi Home branded application, it can be downloaded both in the Play Market and in the AppStore.

Download the application, run it and get back in the European region. Once in the main menu of the application, click the “” ”in the upper right corner to add a new device.

Now it is necessary to reset Wi-Fi settings on a vacuum cleaner, for this, click the inclusion key and home for 3 seconds, before sound indication. After resetting the Wi-FI settings, the vacuum cleaner will automatically determine in the list of available devices for connection, you can also select it manually.

Next, enter data points Wi-Fi, to which you want to connect the Xiaomi vacuum cleaner. Only 2.4 GHz is supported.

Now you need to wait a couple of seconds to connect.

Then the connected vacuum cleaner will offer to specify the location.

You can also share access with other Mi Home users.

Xiaomi Robot Robot Vacuum Mop P Robot is connected to your smartphone and is ready for further manipulations, for which it is enough to press on the vacuum cleaner icon that appeared in the main Mi Home menu.

You can also use the instructions for installing the Russian language of the voice acting of your new friend.

Preparation of the apartment

For high.Quality cleaning, setting up a vacuum cleaner Xiaomi G1 requires preliminary preparation of an apartment or house. It is important to remove the wires from the floor, which can lead to stopping the device and even its breakdown. On the purified surfaces there should not be small things and objects that household appliances will capture with garbage.

To limit the access of the robot, the permits on certain surfaces should be purchased and installed special magnetic tapes. It is not recommended to use artificially created barriers in this capacity, since this can cause a program failure and disable the technique. It is important to limit the access of the robot permit to the steps and high thresholds from which it can fall.

After completing the cleaning cycle, it is advisable to carry out the full maintenance of the robot permollis-clean the filter and the garbage collection container, remove the dirt from the brushes.

Setting up the Xiaomi Mi Roborock S50 robot

Installation of cleaning time

Thanks to the mobile application, you can configure the cleaning time of the room. In this case, the vacuum cleaner automatically begins to remove it at the established time, and at the end of cleaning automatically returns to the dock.

Wi-Fi settings reset

Due to the replacement of the router, if you forgot the password or there are any other situations that led to the problem of connecting the device to the mobile application, open the upper panel of the vacuum cleaner to see the Wi-Fi indicator, at the same time press and hold partial cleaning and charging buttons, Until you hear a voice notification of resetting wi-fi settings. Wait until the Wi-Fi indicator begins to blink slowly, indicating a successful reset of settings.

Determination of the cleaning area

Using a mobile application, install the settings for the cleaning area of ​​interest, after which the vacuum cleaner will remove only the zone you have determined.

Determination of the final point

Using a mobile application, set the settings to achieve the necessary point on the room map, the device will automatically determine the route to achieve the goal.

Cleaning mode

Using a mobile application, choose a quiet, normal, strong and maximum cleaning modes. By default, the normal regime is chosen.

“Do not disturb” mode

In the “do not bother” mode, the device cannot automatically continue cleaning or independently reproduce the sound message, the brightness of the ring.Shaped indicator is reduced. By default, the “Do not disturb” mode is turned on from 22:00. 08:00. Using a mobile application, disconnect this function or set up on your own turning on the “do not disturb” mode.

Virtual wall

Not included in the standard configuration of the Xiaomi Mi Roborock S50 robot, order it from the link www.Roborock.Com.

Using a special tape, separate the area that does not need to be cleaned (for example, the rooms where there may be water on the floor (bathroom) or too small rooms where the device can get stuck), creating a virtual wall for a vacuum cleaner. Attention: securely secure a special tape on the floor surface so that the vacuum cleaner cannot move it, otherwise the effect of the virtual wall will not be achieved.

Setting up the Ilife V55 Pro robot

Time setup

BUT. Direct the remote control to the robot (make sure the power switch on the robot is turned on) b. Press and then use the direction buttons to install the correct time. Click. To save the settings. Turn off the robot to cancel the schedule

Scheduled schedule on robot vegetables

When the schedule is configured, the Ilife V55 Pro robot will be cleaned automatically at the same time daily. If the robot is turned off, then the schedule will need to be adjusted again.

BUT. Direct the remote control to the robot.B. Press and then use the direction buttons to set the schedule.AT. Click. To save the settings. Turn off the robot to cancel the schedule.

Elimination of possible malfunctions

1) whether it is necessary to charge the battery and completely discharge the first 3 times?

Lithium battery without a memory effect, so complete charging is enough.

In cases where there was a loss of communication between the robot and the phone (the router changed the configuration, you forgot the password or for some other reasons), open the top cover to see the Wi-Fi indicator. Then click at the same time on the power button and the Home key until you hear the V-Fi rebooting voice notification. If the Wi-Fi indicator infrequently becomes again blurring, this means that a successful reset has been made.

You can update the robot firmware through a mobile application. During the update, please connect the robot to the dock and make sure that the charge level exceeds 20%. Когда кольцевой индикатор замигает белым цветом – встроенное программное обеспечение обновлено.

If the robot does not respond to keystrokes or cannot be turned off, try to restart it by pressing the reset button (Reset button under the lid), the robot will automatically reboot the system. The reloading of the system drops the settings of synchronization, cleaning mode, as well as Wi-Fi settings.

5) how to restore factory settings if it is not possible to drop the system?

If you are not able to reset the system, please click on the Home key and on the Reset key until you hear the voice notification “Launch of the restoration of factory settings”. The robot will begin to restore factory settings.

The possible level of the battery can be very low. Please connect the robot to the dock and let it recharge.

Possible temperature can be lower than 0 ° C or higher than 50 ° C, while the working temperature range is 0-40 °.

A possible docking station may not be connected to the power source, so please make sure that both ends of the electric cord are connected.

The possible connectors of the docking stations can be polluted, therefore, please clean the charger connectors of the docking stations and the robot.

8) what to do if the cleaning efficiency has decreased or dirt remains?

Possible please clean the garbage container, it can be full.

Possible please clean the filters, they can be clogged.

Possible please clean the central brush, hair can be wound on it.

9) what to do if the robot cannot return to the docking station?

Possible please move it to another free zone, t.To. Obstacles may interfere with him.

Possible please put the robot next to the dock and check if it is returning to the dock or not. Perhaps he was too far.

10) What to do if the robot behaves abnormally?

Restore the robot. If the problem remains, then please, discharge the system or restore factory settings.

11) whether the robot consumes a lot of energy when constant charging?

During charging, the robot consumes a certain amount of electricity, but after complete charging it goes into sleep mode to maintain maximum performance.