How to set up Dykin air conditioning for cold air

Review of Daikin air conditioners: error codes, comparison of channel and cassette inverter models

Like all other manufacturers, Daikin has instructions for all episodes and models of air conditioners. They include a standard set of operating recommendations, descriptions of working characteristics and additional options, installation tips and, of course, detailed instructions for the DAIKIN air conditioner remote control with all the rules for installing various modes.

We can say that the last point is one of the most important ones, since detailed installations are given to put the main cooling modes, heating, drainage, ventilation and purification. Instructions for the Daikin air conditioner control panel explains how to enable the “Timer” function, how to adjust air flows or enable an economical mode.

The main instruction for Daikin air conditioners also contains important information about cases of malfunctions that are not violations of the work. For example, if the operation suddenly stops and the “operation” light lights up, then this means the operation of the protective stop of the device with significant voltage fluctuations. Usually, renewal occurs after 3 minutes.

Installation of modes on air conditioning

To install the heating mode, perform the following actions:

Press the power button. To turn on the air conditioner.

Click the mode selection button to set the working mode.

With each click of the Mode button, the mode changes in the following order: Auto (Auto) → Cool (cooling) → Dry (drying) → FAN (ventilation) → Heat (heating).

The fifth function is the heating mode.

After choosing a Heat mode (heating), set the desired temperature with a button on the remote control control.

If necessary, set the fan speed with a button on the remote control panel.

When setting the heating mode, please consider the working temperature range given in the tables below.

For inverter air conditioners (AQV series):

For non.inverter (“ordinary”) air conditioners:

Instructions for the air conditioning remote control. what do the buttons and icons mean

I will arrange all the functions and buttons in an importance from often pressed to rarely used.

Perhaps, after pressing the button, the device will not start immediately (it depends on the selected mode and temperature).

  • To enable the desired mode, there is a “Mode” button (it can be displayed on a remote control in the form of several small icons. snowflake/sun/droplet). When it is pressed, the air conditioning modes switch sequentially. Most devices are 5 modes:
  • automatic (inscription “Auto” or icon of “triangle” or another);
  • cooling (inscription “Cool” or icon “Snowflake”);
  • Heating (inscription “Heat” or icon “Sun”);
  • drainage (inscription “Dry” or icon “Drive”);
  • Ventilation (the inscription “FAN” or the “Fan” icon. it is important not to confuse the “FAN” mode with the “FAN” speed button).

After turning on the desired regime, it is important to wait 5-10 minutes until the “Konder” is rebuilt.

P.S. Rares rarely come across, where the modes are not turned on by the Mode button, but by separate modes buttons. Cool, Heat, Dry, etc.

The principle of operation is simple. what temperature was set on the remote control, such an air conditioner will support in the room. For example, if you set up 25, then the device will try to maintain 25 degrees in the room (many mistakenly think that the higher the number, the colder the device will blow. this is incorrect. )

  • Of course, if the air conditioner is calculated incorrectly, then he will never achieve the desired temperature.
  • On some models, the configured number automatically changes to the current temperature in the room. do not get confused.
  • The air conditioner will not be cold, if you set up 25 on the remote control, and in the room, let’s say, 24 degrees. It also applies to heating mode (the device will not warm if the room is already achieved in the room).
  • To change the speed of air flow from the inner block, you need to find the Fan Speed ​​button (it can be just “fan” or just “Speed”, or “Fan” icon).

On the display, the fan speed is displayed in the form of a scale or inscriptions Low/Med/High/Auto (slow/medium/fast/automatic speed). When setting up automatic speed, the device itself chooses how speed to twist the fan at the moment.

How to Use AC Remote Controller || DAIKIN Inverter Air Conditioner Remote Control Functions ||

Speed ​​setting does not affect the value of the mood (for example, if they set up 25 degrees, they will also be supported). This function affects only the speed of cooling the room (speed of reaching a given temperature).

It is important not to confuse adjustment of the speed of the fan fan, and the operating mode “FAN” (ventilation. switches using the “Mode” button). Also, we do not confuse the automatic speed of rotation of the fan with the automatic mode of operation of the device (“Auto”. also switches using the “Mode” button).

The flow of any air conditioner is regulated in two directions. up/down and right/left. Up/down at any air conditioner is adjusted by the button on the remote control. But the right/left can be adjusted in manual form (in this case, be careful and better turn off the air conditioner).

There are several variations of the “Swing” button up/down:

  • It happens that the direction changes in the simplest mode (once pressed. the curtains “swim”, the second time pressed. the curtains were fixed at any point in the amplitude);
  • It happens that the direction is changing step.by.step (once pressed. the curtain moved one step, pressed the second time. the curtains moved one more step and so on);
  • It happens that the situation is changing, as the schematic image shows on the display of the remote control.

I recommend that you experiment with the setting direction to find the safest position (so that the flow of air does not blow on people and the vacation areas of households. Read more here)

These were the main buttons that are on absolutely every remote control. Next, we will analyze additional, more rare buttons and functions.

  • To enable the “sleep mode”, the “Sleep” buttons are used (it can also be “good Sleep”). The algorithm for the operation of this function for all air conditioners is different, but it unites them that the fan works at the slowest revolutions. In this mode, the configured temperature can automatically change by no more than 2 degrees. this occurs gradually within a few hours. This is due to the phases of human sleep so that the temperature at night when falling asleep, awakening and in the phase of deep sleep is the most comfortable and safe.

On the display in sleep mode, the icon “in the form of the moon” is often depicted. Read more how your model works when activating this option only in the instructions for its operation (it goes with the documents to the “Split”).

The quiet “Quiet” mode performs approximately the same function, only the temperature does not automatically change.

  • To quickly cool the room, the so.called “turbo mode” is used. The buttons on the remote control have the inscriptions “Turbo”, “Jet”, “Jet Cool”, “PowerFul”, “Hi Power”, or the icon similar to the “Accelerated Fan” icon. To activate accelerated cooling, you need to press the corresponding button once. After which the fan of the internal unit begins to rotate at the highest speed. Upon reaching the set temperature, the “turbo mode” automatically disconnects. It can also be turned off on your own repeated pressing the button.
  • To program the time for turning on or disconnecting the device, a timer is used. For different air conditioners, the timer settings buttons differ. Some models have only one button (“Timer”), some models for setting up time have a whole block of buttons (“Clock”, “Timer on”, “Timer OFF”, “ONF”, “OFF”, “ Cancel “,” set “and various arrows). In such models, setting is intuitively more understandable. you must first configure the current time, then the time of turning on or disconnecting the “Konder”. And in models, where only one “timer” button, the time switching function perform standard buttons (temperature adjustments, fans and others).

Settings of configuration of any air conditioner

P.S. If in the room the current temperature corresponds to the configured, then the air conditioner will not be cold (or warm depending on the regime).

Instructions for the Daikin air conditioning console

Like all other manufacturers, Daikin has instructions for all episodes and models of air conditioners. They include a standard set of operating recommendations, descriptions of working characteristics and additional options, installation tips and, of course, detailed instructions for the DAIKIN air conditioner remote control with all the rules for installing various modes.

We can say that the last point is one of the most important ones, since detailed installations are given to put the main cooling modes, heating, drainage, ventilation and purification. Instructions for the Daikin air conditioner control panel explains how to enable the “Timer” function, how to adjust air flows or enable an economical mode.

The main instruction for Daikin air conditioners also contains important information about cases of malfunctions that are not violations of the work. For example, if the operation suddenly stops and the “operation” light lights up, then this means the operation of the protective stop of the device with significant voltage fluctuations. Usually, renewal occurs after 3 minutes.

Infrared remarks optimally operate at a distance of up to 4 meters.

With a distance of 4 to 8 meters, bright lighting can disrupt the infrared beam stroke.

The instruction of the air conditioning control panel begins with the schematic image of the device with the designation of its parts and buttons.

Main functions

Description of the air conditioning remote control says: to go to the main functions menu, you must drown the Mode button. The modes are displayed on the display:

  • Heat. air heats up to 30 degrees;
  • Cool. air cools up to 15. 18 degrees. To change the temperature, it is necessary to press the arrows down or up;
  • Dry. air drainage. At a stable temperature, humidity decreases;
  • Fan. regulates the speed of rotation of the fan. Usually 3 speeds are set;
  • Auto. all parameters are set automatically. Sometimes this mode is turned on by a separate button. It can also be launched from the air conditioning building, without a remote control;
  • Sleep. quiet work at night;
  • Swing. a special regime of intensive ventilation of the room.

How to enable the air conditioning for cooling

Using this instruction, you will learn how to enable and correctly configure the household air conditioner. Any remote control of the household air conditioner has 5 main buttons. We will arrange them as the significance decreases in use:

Suppose we never used the air conditioner, or only it was installed, or we don’t know in what mode he is configured (heat, cold, etc.) In order to check the performance of the device, you can follow the following instructions.

Turn on the air conditioning for cooling:

When setting up some air conditioners, this figure can be changed in a couple of seconds (showing the current temperature in the room);

  • Further, if necessary, we change the speed of rotation of the shaft with the “FAN” button;
  • We can adjust the direction of air flow using the Swing button.
  • The air conditioner will not be cold if the temperature in the room reaches a configured temperature;
  • When using the remote control, we always direct it to the air conditioner.

Daikin Air Conditioner New Remote Clock & timer Setting | Tutorial by Ms. Elise Ho (DMSS Ipoh)

Free advice: when using the air conditioner, it does not need to be turned off at night or when you get cold. Better configure the optimum temperature. So it will be comfortable for you, and the air conditioner will work in its normal mode. For example, at night you can increase the set temperature by 1-2 degrees.

Cold air inclusion process

All household devices, including climatic, are continuously modified and modernized. Even the most ordinary averaged air conditioner has a considerable set of various modes, however, the main of them is cooling.

After acquiring the device, almost every consumer has encountered air conditioning settings and questions about how to switch from heat to cold and vice versa. Only the correct setup and the correctly set temperature will provide the most efficient functioning of the system.

To turn on the air conditioner for cooling, several steps should be performed:

  • Connect the device to the network, turn on the fork in the outlet;
  • Click on “On/OFF”, the blinds open;
  • We switch the Mode key several times before the appearance of a snowflake or mode “Cool”;
  • select the desired temperature value using the arrows up and down “TEMP”;
  • We adjust, if necessary, the position of the blinds and the fan speed “Far” and “Swing” keys.

In a regular air conditioner, after reaching the desired temperature value, the outer unit stops functioning until the air warms up again.

Inverter air conditioners overtake the usual split systems not only in terms of accuracy of the set temperature, but also for significant energy savings (up to 30%), due to the absence of numerous start loads

In inverter devices, the compressor does not turn off, but reduces the speed, due to the small low.minute temperature fluctuations, comfort is created and more accurate temperature parameters are provided.

Tips on the temperature range

Fleeing in the summer from the heat, you turn on the split system for cooling.

At the same time, we must not forget about the elementary rules so as not to make it source of colds:

  • The difference in the temperature of the room and the street should not exceed 3-5 degrees;
  • It is advisable not to set a low temperature of 16-17 degrees;
  • a decrease in temperature should be carried out gradually;
  • Avoid long.stay in three.meter risk zones.

It is recommended to cool the room with step by step, avoiding contrasting differences and lowering the temperature by 2-3 degrees once a half hour. The maximum difference with external indicators in severe heat is allowed 7-10 degrees. If possible, set values ​​in a comfortable range of 20-24 degrees.

At night, the temperature should be raised by 1-2 degrees, activating the “sleep mode” or do it manually. The regime is designed on the basis of studying the vibrations of human biorhythms during sleep, is characterized by a decrease in the minimum of the fan speed, and, as a result, by saving electricity

The use of various shaft speeds or “pumping” will be appropriate for uniform distribution of chilled air (in any modern model there are at least three options). It is worth considering that when the FAN and Turbo modes are turned on, the temperature on the air conditioner is set automatically and is not regulated.

How to set up air conditioning for cold

In order to configure the split system for the cooling mode of operation, you must perform the following sequence:

  • We turn on the split system in the “network” (put the plug in a socket or through an automatic machine). After turning on, the sound signal of the internal block should be heard, which indicates the inclusion of the device. You need to wait until the blinds go to a closed position.
  • After clicking on the “ON” button, blinds should go to an open position.
  • Choose the operating mode for cooling using the “Mode” button. To do this, you need to press this button until on the panel there is a designation of the required mode. “Cool” or stylized image of a snowflake.
  • The temperature regime is selected by the buttons “Up”, “down” or “”, “-“. The temperature is selected, which the split system should maintain in the maintenance room.

Important! Some models after setting up temperature and display the values ​​on the information board change the value to the current air temperature in the room. In this case, work on cooling will be performed until the initial given value is achieved and maintained.

  • If there is a need, then the fan speed changes using the FAN button.
  • The direction of the air flow through the adjustment of the position of the shutters is carried out by the button. “Swing”.

You should turn off the air conditioner at night or if the sensation of the cold appears. You should always configure the optimum temperature. This will not only achieve comfort, but also use the device in normal operation. At night it is desirable to increase the specified temperature by 2-3 0 s.

How to turn on the split system for the cold from the remote control

In this section, we will talk in detail about how to enable and correctly configure a home split system to work in cooling mode using a remote control. In the first part of this article, we overviewly described which buttons can be on the remote controls and they are also duplicated on the control panel, which is located on the internal block (by the way, it can be not only buttons, but also toggle switches, as well as “rollers”, the rotation of which sets the range temperature).

Now we describe the alternative layout of the buttons of the remote control of the split system:

  • “ON/OFF”-turning on the split system and turning it off. These are two functions that are combined with the functionality of one button.
  • “TEMP” with the sign “” and “-”-an increase and decrease in the temperature parameter.
  • “FAN Speed”. the speed of rotation of the shaft of the fan of the internal unit.
  • “Swing”. a change in the position of the blinds (direction of air supply);
  • “Mode”. selection of modes: cold, heat, moisture removal, ventilation, car.

You need to know when operating in cooling mode:

  • The split system stops cooling the air in the room if the temperature has reached the set parameter.
  • When using the remote control, it should always be directed towards the air conditioner.

How to Change From Heat to Cool & Back Again (NOT Auto)!!. Daikin Wall Controller BRC1E62

Self.diagnosis system of air conditioning

All models of Daikin air conditioners are equipped with a self.diagnosis system. With its help, they themselves diagnose their condition, and then inform about the problems found. You can start this function in a special mode, but it also works automatically.

Almost all failures can be found out by observing indicators, and the mechanism of this process is very simple. In normal condition, LEDs radiate even light. But as soon as the violation occurred, they begin to pulsate with the subsequent repeat of outbreaks. A letter-to-digital or letter combination occurs on the display of the remote control.

The latest models of Daikin air conditioners are created taking into account the latest technologies. They have a stylish design, low noise, undoubted quality. The models are economical and productive

Vocated in the decoding of encoded information about breakdowns, you can understand that some malfunctions of the house is quite capable of eliminating it independently. If the failures are difficult, then by informing the master the code, the user will speed up the repair process.

Classification of fault codes

The letter at the beginning of the code indicates the constructive part in which the malfunction arose:

  • failure in the inner block. “a”, “C”;
  • refusal to the power part. “e”;
  • temperature malfunctions. “f”;
  • Problems with nutrition. “n”;
  • problems in the external block. “l”;
  • Fan engines are blocked, pumps for drainage or the electronic board of the internal unit are faulty. “p”;
  • System failures. “u”, “m”.

Errors that are not critical and rarely appearing are encrypted by a combination of numbers.

Centralized control with a universal graphic controller

The universal graphic controller “all in one” (Intelligent Touch Controller), developed for Daikin air conditioners, allows you to control the condition of up to 64 devices and manage them to control them. It is a small-sized device with a sensory LCD display, its graphic Inte Weekes makes air conditioning management as convenient and understandable as possible.

Intelligent Manager allows you to control the air parameters in the premises of the whole building from the selected computer and control 1024 internal blocks of DAIIKIN air conditioners.

Centralized management allows you to combine Daikin air conditioners of all classes and types into a single system and monitor the climate system within the entire building.

Buttons on the air conditioner remote control

Any slide system has five main buttons:

dykin, conditioning, cold
  • Power button;
  • Switching button;
  • Double temperature adjustment button;
  • Button for adjusting the speed of rotation of the shaft;
  • Lyluzi direction adjustment button.

Read more about the value of these buttons can be spied in an article of the cooling settings.

But before taking the remote control, first we turn on the air conditioner into the network (like any electric device). Most often it’s just a fork that needs to be included in the outlet. The air conditioner power can also be through an automatic machine in an electric shield. In general, depending on the method of connecting the air conditioner, we turn on the machine or stick the fork into the outlet. In this case, you must hear the sound signal from the inner block. If the block does not react in any way, then read the article, which is why the air conditioner may not turn on. After a successful supply of power, we take the remote control and act further!

How to turn on the air conditioner for heat

I want to say right away that if you are mistaken somewhere, then nothing terrible will happen! You just need to wait and repeat everything again.

We are waiting for a few seconds, while the blinds open, and the fan of the inner unit will begin to rotate;

  • Then press the button to switch the mode so many times until we switch to the sun icon or the inscription “Heat” (which means “heat”).

After that, the air conditioner can stop the rotation of the fan or close the blinds (this will happen if the air conditioner has not been tuned to heat). What else will happen to the air conditioning, I will write a little lower, but now it does not matter. But at this moment we are already moving to the next setting (to the third point)!

Daikin BRC1E63 controller set up field settings cycle fan off, activate sensor in wall controller

  • While the air conditioner is “reconfigured” by the temperature adjustment buttons we set up degrees by 30. Let it be so for now, and in about 20 minutes already set up for yourself (I recommend 25-30 degrees).
  • The cluster adjustment button also put the most convenient position for you. Further, the most difficult thing is to wait until it turns out from the air conditioner with the long.awaited warmth. Then we set up the air conditioner comfortable for ourselves. Read more about the choice of temperature, as well as about the last two points, read the article on how to use the air conditioner correctly;

Now let’s get back to the second point. I want to explain in simple user so that you do not be scared, that a strange. There is nothing strange in his behavior! Just after switching the mode, the air conditioner’s algorithm changes, and it redirects the movement of the refrigerant (now you can not delve into this!). The temperature control of radiators and other processes that are not important for our article are. The most important thing for this article is only that you need to wait 10 minutes and do not press anything superfluous.

But there are several features that cannot be forgotten when turned on for heating:

  • When working on heat, the split fan can periodically stop (for heating the radiator). Don’t be scared! In most cases, this is its normal work;
  • If you do not know at what street temperatures you can use specifically your model, then at a negative street temperature I do not advise you to turn it on. Some air conditioners are defense for these cases, so they may not start. Read more on this issue, read the possibility of including the air conditioner in winter;
  • If the current temperature in the room is higher than you set up, then it will not “warm”;
  • When setting up, direct the remote control towards the air conditioner so that it receives a signal. Otherwise, it may turn out that the settings are changing on the remote control, and the air conditioner works in the same mode;

If in the cold period you are frozen, when you still did not have air conditioning, then with its acquisition you will immediately feel the difference. The heat that air conditioning provides you is cheaper than any heater. And it is also important that the temperature is very accurately maintained.

Finally, I’ll leave a link to another useful article about heating by air conditioning.

About the author

| Denial of responsibility | Contacts |RSS