How to turn on the leberg air conditioner for heating

Select model

Choose your air conditioner model (if not, read on):

  • Modes of operation of the air conditioner, description, translation into Russian, features
  • 10 reasons: Why the riser is hot, but the heating radiator is barely warm
  • 11 reasons: Why the air conditioner does not heat, blows badly, heats poorly
  • Inverter or conventional. which air conditioner is better to install in the apartment?
  • Micathermal heater: principle of operation, pros and cons, real reviews and efficiency


In almost all split systems, the “MODE” button is used to switch operating modes. With it, you switch between modes:

Each model they are located in their order. You just need to wait until the sun icon, “HEAT” lights up on the remote control display, or this inscription is marked with a check mark or an arrow.

Some models are equipped with universal control panels. If the mode does not switch in a normal way, you need:

  • Get batteries from the console and insert anew;
  • Wait while it does not begin to flash the arrow between the “HEAT” positions “Cool”;
  • Press the “Mode” button when the arrow will be opposite the inscription “Heat”.

Installation of the air conditioning system

Air conditioners should be operated with a clear observance of the most necessary norms. this action will provide extension of the service life to the maximum, and also eliminates the owners of climate equipment from the need for expensive and frequent repairs, which, as a rule, is carried out with the replacement of expensive parts such as compressor or control board.

Before installing the air conditioner, it is required to study in detail the instructions in which it is indicated how best to produce these actions, as well as how to include air conditioning for heat. Experts advise not to save on such responsible actions as installation, but to trust professionals. But with elementary functions, you need to understand yourself.

Installation of the system is to be made in accordance with generally accepted rules of use of this device. it is necessary to ensure the system easy flow of air and the outflow.

Switching the air conditioner to heat is carried out using the air conditioner control panel (remote control or wall-mounted). The operating mode of the air conditioner for heat is usually indicated on the control panel with an icon with the image of the Sun. In addition, to operate air conditioners before using it, you need to conclude with the company that is its supplier, a special agreement on the service of this system.

Before starting to use the air conditioner, you need to learn all the details and features of its operation. how to include air conditioning for heat or cold, how often it is necessary to ventilate it and is it possible to independently make preventive work? Everyone should know that regular maintenance of this unit will prevent premature failure of the system. This, for example, often happens in the summer. at a time when service companies are fully loaded with orders and simply do not have any opportunity to quickly respond to a call and restore the functionality of your particular system. So if the climatic equipment suddenly failed into a difficult period for repairing, and you do not want to urge it finally, you should not start repairing it yourself. It is necessary to turn off the air conditioner from the network and wait for a specialist who will be able to conduct a real qualified repair with its knowledge in this area.

Пульт для кондиционера. Как пользоваться? инструкция по применению!

To enable the heating function on the air conditioner using the control panel, regardless of the model, you need to perform slightly simple actions:

turn, leberg, conditioner, heating
  • Take the remote control from your air conditioner and turn on the device as usual mode, t.E. press the power button «ON / OFF».
  • On the remote must be the “MODE” button. Press it and switch the modes until the Shernyka icon or “Heat” icon will be displayed on the screen.
  • Press the “Heat” key (or the Sun icon). This will allow the split system into heating mode and heat the room to 30ºС.
  • If there is no “Mode” button on your remote, look at the buttons with the icons “Snowflake”, “Fan”, “Droplet”, “Sun”. Click the sun. If there is no “Sun” nor “Neat” on the remote, but other modes are displayed, it means that your air conditioner does not support the heating function.
  • Pay attention to the buttons marked “” and “-“. They allow you to adjust the temperature from 1ºС and above. Taking advantage of them, set comfortable conditions for yourself (the set temperature should be higher than that currently exists in the room). Or use the Up and Down keys.
  • Be sure to wait about 5-10 minutes. Warm air will not come out immediately. The fan will turn on first, then the air will start to heat up. But pay attention, the device must respond to your actions (beep, blink, turn on / off).

You can, on the contrary, first adjust the heating on the console and only then turn on the air conditioner (press the “ON” button). For some models, this order is considered correct.

It is more convenient to translate air conditioning in heating mode using the control panel. On the body of the device there are special buttons with inscriptions, all the necessary information is displayed on the display. For various models of split systems, there are two main types of designations on the remote control, which are somewhat different from each other. Let’s consider each of them.

With “MODE” key

On the remote control of the split system, the choice of the desired program is carried out by the “Mode” button. When you click on it, the inscription “Heat” or a schematic image of the Sun. Then the temperature value is set using the “” and “-” keys or the buttons with the “up”. “down” icon. You can pre-program the remote control to easily switch the air conditioner to warm mode if necessary using the “ON” button.

Without “MODE” key

In some models of split systems, there is no “Mode” designation on the remote control, but there is a “sun” symbol. By pressing the button next to it, you can set the air conditioner to warm mode. Heated air does not begin to flow immediately, but after 5-10 minutes. There are also systems where, to switch from one mode to another, you need to additionally press the “ON” button.

Important! It is not recommended to set too high temperature values. Because of this, the equipment elements quickly wear out and fail.

If the remote is not

Consider how to turn the air conditioner on heat when the control was lost or out of order. Most models of climate control equipment can be set to heating mode using the electronics control panel.

The sequence of actions should be as follows:

  • First, check if the split system is working by plugging it into the network.
  • Then locate the control panel of the plastic cover on the front side of the instrument housing. Lift it, slightly pressing and supporting the edges.
  • On the control panel there is a button with the inscription “ON / OF”. When pressed for a long time (for several seconds), the device turns on or off. The same key will help to translate the device into air heating mode. How to set the air conditioner for heating. just press the button without holding.

Important! You can only adjust the temperature of the air temperature only with the keys available on the remote control by clicking on the “” or “-” buttons. Before switching the air conditioner from one mode to another, you should familiarize yourself with the instruction manual installed in your apartment split-system model.

To get a consultation:

There may also be the LOCK buttons (blocks the settings), LED (remote illumination) and Clock (Shows the current time) and DR. It all depends on the model of the split system and its capabilities.

Sometimes manufacturers make the inclusion of Cool, Heat and Fan functions in separate buttons.

How to turn on the air conditioner for heating? Air conditioning to warm! The universal way!

How to enable heating mode on air conditioner

Many modern models with a remote control or without it allow you to easily turn on the heating mode. Those devices that can intend with a smartphone can also work and remotely.

With the help of console

First you need to simply turn on the power of the device. The consoles with the display usually highlight the current mode. The transition from one menu item to another is most often implemented using the MODE button.

Even the universal console works exactly by the same principle as the regular

Multiple pressing on this key switches modes in order. If the indicator is made in the form of icons, then you need to look for the one on which the sun is drawn. If there are inscriptions, then you need heat. To warm up the device can leave up to 10 minutes. Now only remains with the remote control to install a comfortable temperature.

How to operate Air Conditioner on Heating Mode

Without remote

In fact, the inclusion of the heating mode, like all the rest of the air conditioning control, directly from the device itself does not differ from the control from the remote control. the mechanism is. you need to turn on using the sun icon or label HEAT.

Air conditioning does not heat: reasons what to do

Modern split systems can work in several modes. Today, models of air conditioners working for cooling and heating are becoming more and more popular. Such devices are successfully used in the off-season and in winter as a heat source. For various reasons, this technique may fail, as a result of which the device ceases to warm the air well or does not work on heating at all.

In the article we will look at what reasons the air conditioner warms it bad or not turn on to heat, tips on solving problems and properly setting the heating mode.

In many modern devices, air conditioning modes for cold and heating are provided. The heating mode on air conditioners is especially useful in early autumn or late spring, when it is still cold outside, but there is no heating.

In this article we told in detail how to switch air conditioners on warm air and how to use the remote control. You can independently adjust the air conditioner for heat by reading this material and watching the video below. If you have already had experience using devices, share your experience on how to turn on hot air on air conditioners. Good luck!

Features of the operation of the air conditioner in winter

Air conditioners for heating in the winter season should be operated, adhering to some rules.

Instructions and features of the operation of split systems in winter:

  • It is forbidden to include the instrument if the street is below the critical indicator indicated in the product passport.
  • During prolonged operation at sub-zero temperatures, the radiator freezes over, which reduces the efficiency of the equipment. The device with a certain frequency (once every 40-60 minutes) goes into defrosting mode, in which hot freon from the indoor unit passes into the outdoor module. The frequency and duration of such a cycle depends on the degree of frostbite.
  • In the process of heating, water flows from the radiator grilles into the pan. At minus temperatures, it turns into ice, which should be eliminated, otherwise serious deformation of the heat exchanger tubes can occur. You can not shoot down the ice manually, you need to shed water from a hot teapot frozen places. To eliminate such consequences and troubles in the fight against icing, you can purchase an air conditioner with a built-in sump heating cable.
  • You should not specify too high temperature parameter to heat the air indoor, as it will make the device at high power, which will lead to rapid wear. Recommended value 1825 0.

In winter, air conditioning also needs periodic prophylaxis. Not less than once in 2 weeks you need to clean the filters and flushing the impeller, where pathogenic bacteria often accumulate. Also required timely refueling freon and preventive inspection of the performance of important mechanisms of the system performed by experienced specialists from the service center.

Outdoor air temperature range

Each split-system model has a specific temperature range parameter. Some models are designed for operation at a maximum temperature, not lower than.5 0. Advanced and expensive models are effective in operation at outdoor temperatures up to.15-25 0.

You can increase the outdoor temperature range by connecting the winter kit to the air conditioner. The set of such an installation includes a heating element for the compressor, a heating cable for the drainage system and a device that reduces the fan speed.

| Denial of responsibility | Contacts |RSS