How to unlock the Hansa oven

To turn on such a device you need to touch the “ON/OFF” button. On all the indicators will appear the symbol “-“. Then you need to set a suitable cookware on the desired heating zone. For models without a slider, the degree of heating is selected with the buttons “-” and “”.

To activate the lock, press and hold the WATCH button for 5 seconds. On the display you will see Loc for about 5 seconds. Indicating that the function parameters cannot be changed. To deactivate the lock press and hold the CLOCK button again for a few seconds.

Press and hold the WATCH sensor for 5 seconds to activate the lock. The display will show Loc for 5 seconds. Signifying that you cannot change the function settings. To disable the lock, press and hold the LOCK switch again for a few seconds.

To turn on the Hansa gas oven, light a match, press the knob as far as it will go and then turn it leftwards to the temperature chosen. Hold a lit match to the pilot light, light the gas and hold the knob down for approx. 3-10 seconds. If the flame goes out, repeat.

To unlock the hob, press the “key” button and hold it down until the text indicating the safety function and the symbol on the indicator light go out completely. You can try this: unplug the power cord and then plug it back in.

It is activated as follows. Press and hold the “key” button until the message “Child Lock is activated” appears on the display. At the same time the key symbol should appear. Approximately 4 seconds are required for the operation.

To set the time you need: Press touch 1 (MENU). The “Pot of steam” symbol should light up. Set the current time using the buttons 2 and 3 (arrows pointing left to right) After 7 seconds. After the time setting operation is completed, the new data will be stored in the memory.

To harden the oven, turn it to the maximum temperature and let it operate and heat up for 1 to 3 hours when empty. If the toxins and odors have not cleared, preheat the oven again.

See also  How to set the clock on a Siemens oven

Hansa BHC63366

Lo” on the display will indicate that the guard has been activated. When the lockout is active, the induction hob will only work on and off, but the heating in any zone cannot be activated.

To switch off the induction hob at the end of cooking, use the “Switch off” control panel (if present). The unit not equipped with a display is switched off with the “On/Off” button.The “/Off” switch, which must be held down for a few seconds before the hob shuts off.

The LOC indicator on the display indicates that the oven is in lockdown. If this symbol lights up, it means that you have accidentally pressed it on the sensor. Release the lock by pressing this symbol again. You can try unplugging the hob from the socket.

Press the start/pause button on the Bosch maxx 5 for about 6-8 seconds. If the “key” disappears from the display, the lock has been removed. On Bosch WAS 20443, you can disable this blocking in the same way. Press the start/pause button for about 8 seconds.

unlock, hansa, oven
  • Press and hold the “key” button for between 3-6 seconds.
  • In most cases, when the temperature reaches 50°C, the hob automatically locks itself and the “lock” sign appears on the display.

Духова шафа Hansa BOES68465

Main switch with child safety lock

Hansa. induction hob BHI68368

To switch it on, press and hold down the key until the lights on the burners light up. The shutdown is done in the same way. The residual heat indicator remains lit until the burner has cooled down completely.

  • Press and hold the “key” button on the touch pad until the “childproof lock active” sign is displayed.
  • The key is lit up together with this message.
  • All manipulation takes about 4 seconds.
  • Reset the oven or hob. To deflate an aluminum battery, unplug it for about 1 minute or turn off the power supply.
  • When the unit is reconnected to the power supply, the clock symbol will flash
  • Contact an authorized service center

About the author

| Denial of responsibility | Contacts |RSS