How to use a beard template

Template or stencil for haircuts of beard: Tips for use

If you are the owner of a luxurious beard, then most likely you know how to care for her. So that the bristles grow evenly and look aesthetically on the face, it must be periodically cut and combed. You can beautifully decorate the beard and form it in specialized hairdressers. But if you are sorry to spend money on a barbershop, you can try to put your face in order at home using a comb for a beard cutting.

A comb for a beard is an accessory of an unusual shape, with the help of which you can comb even the hardest bristles. Massage by the crests of the crest, you improve hair growth and set them the right direction. The hairs will lie one to one, and have exactly the form that you need. Say “no” sticking bristles and tangled hairs. With this accessories you can provide the desired care of your beard at home.

Assessoire for a beard is made of durable plastic. Rare teeth make it possible to carefully comb the bristle. If you are unhappy that the beard grows too slowly, try to comb it with this accessory twice a day. Thanks to the resulting massage during the procedure, you will improve blood circulation, and the hairs will grow faster. Proper care also prevents the problem of ingrown hair, which can provoke irritation.

Beard Bro

The comb for the beard has a convenient size and easily fit in the glove compartment of your car or in the of the coat. You can store it in the desktop box, because at work it is most important to look presentable and accurately.

Buy a beard template. Every morning, combing a beard, you can give her uniform in a few minutes and spit extra hairs right during the morning toilet. If you care for vegetation every day, then you will not need to spend an hour on the correction of the circuit.

A loan for a beard has the shape of a boomerang, on the one hand there is a comb itself, and on the other a flat handle, which serves as a pattern. The thin edge makes it possible to tightly apply stencil to the face and give a symmetrical shape of the beard. With the help of a stencil for a beard, you easily bow whiskey and the contour of the beard without violating their shape.

Just attach a stencil to the edge of the beard, and ware a regular machine. Then do the same procedure with the other side of the face. The stencil is suitable for caring for any vegetation on the face. If it was a three.day bristle, which must be emphasized with a beautiful contour. Stylish digitalis that requires thorough modeling or thick beard, which just needs to be combed well, Beard Bro will become your assistant anyway.

beard, template

If you decide to let go of the beard, you should be prepared for the fact that you will need to carefully care for it. Beautiful beard, certainly worthy decoration of any man. However, without proper care, vegetation on the face will only talk about untidiness and banal unwillingness to shave. Any self.respecting man who decided to grow a beard must buy a comb for a beard. In order not to go bankrupt from permanent campaigns in the barbershop, use a comb for a beard Beard Bro and to care for bakes or a mustache.

For these purposes, another accessory was invented, which will put in order not only a beard, but also another vegetation on the face. The comb for styling beard and mustache is made of the same material and has what form, as well as an accessory for a beard.

This accessory has crests on both sides, one more for a beard, the other smaller. for mustaches and bake. In one movement you can put in order all the vegetation on your face. A stencil for cutting a beard and mustache has a special brush brush brush.

What it is

A beard shaving template is a special adjustable, adjustable device, which is a given form. It is attached to the face and covers the one that should be left, the hair left outside is shaved out.

Yeard Project. Week 34. Beard Shaper

It looks in the form of a comb. a crest, a triangular shape, with a curved hypotenuse inside. Or in the form of an oval with clamps.

A stencil for the care of a beard is a multifunctional accessory for the care of a mustache, beard, temples, eyebrows. The purpose of the stencil depends on its design. Multifunctional stencils help create contours, symmetry, level straight lines. One stencil can be trimmed, create a presentable look, adjust, trim the hair in all parts of the face.

To do this, just attach it to the face, and remove excess vegetation with a trimmer.

Stencils and templates are used in tandem with tools such as razor, trimmer for grass, haircuts, scissors for beard.

Espanyolka template-an oval device that is tightly adjacent to under the nasal zone, holds his teeth. As soon as this condition is fulfilled, you can safely shave unnecessary vegetation along the contour. The width of the accessory is equal to the width of the mouth. It is made of durable plastic, with clamping clamps.

What is a stencil for a beard

The form in which you can easily cut the bristle on the face, is a pattern that can be adjusted, easily adjusting to the existing features of a person. The template is applied to the face, it closes the part where the bristles should remain, and the free areas should simply be shaved with a comfortable tool.

The template has the form of a comb, which has a triangular shape, inside is a curved hypotenuse. Sometimes you can find specimens, which are an oval with fixers.

The stencil is a multifunctional accessory that allows you to carry out the necessary care measures to put in order eyebrows, whiskey, beard, mustache. Its specific purpose is depending on the design. Multifunctional models allow not only to create contours, but to take into account symmetry, to align straight lines. One accessory allows you to create a form, maintain it with periodic adjustment, to trim the bristles in different parts of the face.

The use of the template is not particularly difficult, you just need to attach the device to the face, and then cut all the vegetation, which goes beyond it.

Sometimes the template can be purchased with vegetation haircuts, trimmers, combs, hairdressers.

Separate attention deserves the Espanyolka template, it must be held by his teeth. It is made of durable plastic. Unnecessary vegetation is simply shaved along the proposed contour.

Why do you need a stencil for a beard

A comb for a mustache, as well as a haircut stencil, must be present in the arsenal of each man who decided to let go of a beard. Because it is not enough just to grow the hair, you need to constantly care for it, maintaining the form by haircut or shaving. It is difficult to create even lines independently, even using a specially designed for this purpose, a trimmer for grass.

To facilitate this work, a special tool was invented. It facilitates the whole process, allowing, in just a few minutes, to shave excessive vegetation, without violating, while the existing contour.

Stencil is a real find for people that do not know how to independently maintain even areas of beard in neatness. Use tools and professionals, it facilitates their work, helping to maintain the necessary symmetry, significantly saving time.

The template facilitates the shaving of hard.to.reach areas. In stores of professional hairdressing tools, you can purchase a variety of models suitable for maintaining the beauty of a particular type of beard.

The basic principles of growing and adjusting the beard of Espanyolka

Espanyolka is one of the most stylish and elegant types of beard that has ever appeared on the male face. So it was in the days of gallant musketeers, so there are today.

  • Modern men value Espanyolka for giving sophistication to the features of almost any (with the exception of a particularly round) face.
  • This aristocratic beard never went out of fashion and has always been relevant.

If we want to get acquainted with the rating of the most popular types of beard, there is no doubt that the subject of our conversation will certainly enter their first ten.

What is an escapanol and who is recommended to wear it?

Espanyolka is a small island of vegetation left under the lower lip in the very center of the chin that has the shape of a wedge.

Espanyolka is sometimes mistakenly called a goor. In fact, these are different types of beards that differ in shape (the outlines of the Espanyolka is more rounded) and the area occupied on a round part of the male chin. Espanyolka occupies all its roundness, the goat beard is much already.

  • Espanyolka can be equipped with a mustache and wide bucks, at the same time it is often worn without additional accessories.
  • There is still a miniature option, which is only a small strip of hair under the lower lip. Most often, a combination of this beard and stylish short antennae is found.

Men with what type of appearance can wear such a beard?

We emphasize once again: Espanyolka does not fit only chubby men. On the faces of all other types, it looks impeccably.

It gives special romanticism the appearance of thin men, and burning brunette acquire with its help a special attractiveness for the fair sex, who prefer communication with true macho.

Types of escanols

The variety of escanols can be reduced to three main types. They are:

  • Classic, representing a neat, pointed wedge without a mustache, deployed throughout the area of ​​a round chin.
  • Vandaikovsky (a beard in the style of van dike). The beards of this species perpetuated the memory of Antonis Van Deek-the famous Flemish portrait artist who lived in the 17th century. This variation of the Espanyolka is a wedge.shaped island not connected to elegant thin antennae.
  • Circular. The beards of this species are devoid of a characteristic wedge.shaped shape, being a very attractive combination consisting of thin antennae connected with a small rounded island covering the central part of the chin. At the same time, the lower lip has a fairly wide base of hairs. On the sides of this base, gaps are left, in need of regular shaving.

How to grow and arrange an escanol?

Giving a beard is a very responsible step that radically changes the appearance of a man, so it requires a certain preparatory period.

Preliminary steps

  • Having removed the razor away, vegetation on the face is given complete freedom. Since the hair on the face of a man can grow in the most unexpected way (the fault of this is a genetic predisposition), before letting go of the digitalis, it is necessary to make sure that they are in the desired areas of the face. This will become obvious after a few days.
  • After making sure that the hair in the right zone grows without problems, you can calmly wait for it to become a little longer. If there are few of them there or they generally refuse to grow in the area of ​​the chin, a man should think about a beard of a different species.

How to quickly grow a beard.

  • Mentally introducing his image with Espanyolka on his face, the young man should think over several possible combinations of its length and shape. This can be done using information obtained from illustrated magazines and sources on the Internet. A great opportunity to choose for their face beards of different species provide computer modeling programs for appearance. They are on the Internet and in good hairdressing salons.
  • Having decided on the choice of shape and the desired length, you can proceed to the formation of a beard.

The stage of the formation of the Espanyolka

How to make a stylish escapanol?

Yeard Project. Week 34. Beard Shaper

  • Any beard begins to form along the edges, and this should begin. Carefully acting with a razor, they begin to remove excess hairs, planning the desired outline. At the same time, they monitor the strict symmetry of the beard created.
  • Perform the operation to outline the outlets of the Espanyolka circuit (a razor machine) or an impeccably sharp blade.
  • Since the direction of the growth of hairs on the face is never constant, it will have to operate with a blade in different directions.
  • If the beard is equipped with a mustache, it is necessary to determine their shape. If desired, you can make a small gap between the mustache and the nose.
  • Concluding the formation of the beard, they give it a wedge.shaped shape, pointing the corner (if the form of a traditional wedge is chosen as a sample). If it is assumed that the Espanyolka will be Vandaikovskaya, the corners should be performed on both sides of the chin.

How to make an espanol-a master class in

What is a shaving template for a beard and how to use it?

Beginners who are not confident in their abilities, you can purchase a special template for the formation and shaving of a beard. You can buy it both on the Internet and in a specialized store offering goods for stylists.

Such templates are universal, because, having slightly adjusted the size and set up a certain face shape (there are three types of settings), they can be used by men with any type of appearance.

Fashion trends of beard haircut

Fashion trends in recent years dictate men with thick vegetation on their faces in the form of tanks, mustache and beards. But the following beard haircuts are considered the most relevant and located at the peak of popularity:

  • Scandinavian Viking beard. a long and thick beard, tanks and mustaches that can be braided into braids for grass and other hairstyle options.
  • Lincoln beard. this beard is truly popular among high ranks and politicians, it does not accept a mustache, but is concluded with tanks.
  • Beard. wide and thick tanks and clear lines of beards, which usually give a triangular shape.
  • Sedding beard. the last peak of Hollywood fashion, the bright representative of which is the most beautiful man actor George Clooney.
  • Mexican beard. vegetation in the zone of a mustache and beard should be homogeneous, starting with a mustache. The beard all the bewolf frames the man’s mouth, completely closing it.

The fashion of this year also approves of such types of beard as Espanyolka, Suvorov beard, screen, garibaldi bristles and goose beard. Fans of extravagance and shocking can resort to beards of famous films, for example, Jack Sparrow or Tony Stark, to the Vikings style and other colorful characters.

How to choose the right shape of a beard and mustache?

To choose the best option of beard, a man must pay special attention to his face shape, the features of the appearance and type of hair. The shape of a beard and mustache must be determined in the shape of a face, namely:

  • For the oval shape of the face, all types of beard are suitable;
  • for a rhomboid shape. a beard with thick vegetation, for example, a screen;
  • for an elongated shape of the face. any kind of beard of medium length with tanks and a horseshoe.shaped haircut of a beard;
  • for a round shape. to lengthen your face, you can wear a goer or digitalis, as well as a massive bristle from one temple to another;
  • for a square face. the skipper and Hollywood beard is ideal;
  • for a triangular shape of the face. the beard of Lincoln or Balbo can increase the chin area.

Important! In order for the beard to look organically with the image of a man, you need to compare growth and complete set. For example, a long thick beard will look ridiculous on a man of short stature and vice versa.

How to make a circuit step step?

To create a beautiful edging at home, you need a little skill and a hair cutting tool.

Stages

The main stages of modeling beard and mustache:

  • Washing with products intended for hard hairs on the face, ordinary head shampoo will not work. It is necessary to use a special shampoo or a beard soap, then treat the vegetation with air conditioning, it will noticeably soften the hairs, make them obediently.
  • Dry a beard in a natural way or using a hairdryer.
  • Trimmer blades for grass process with oil, if necessary according to the instructions.
  • Cutting length to the required value. You can use a trimmer for grass or a hair cutting machine with an appropriate nozzle. With certain skills, you can do with ordinary scissors.
  • The formation of contours. After determining the boundaries, excess hairs must be lubricated with shaving or foam gel, and then shave. In areas requiring complete hair removal, it is permissible to leave a small bristle.
  • Applying a lotion or balm after shaving.

After the modeling is completed, a cold towel is applied to the face to prevent irritation. To fix the shape, the beard is treated with oil or wax.

The upper boundary of the beard. a fishing line for a trimmer cheeks

The fishing line for the trimmer of the cheeks is designed using stencils, the hairs must be shaved in the direction of their growth, starting from the upper part to the crossing with the border. To create a natural species along the hair growth contour, you can leave the bristles with a length of not more than 1 mm.

The lower border of the beard. a fishing line for a trimmer of the neck

After determining the circuit on the neck, excess vegetation is removed using a razor or a trimmer for grass without nozzles. During shaving, the skin must be pulled slightly.

The recommended distance between the kadyk and the border of the beard is no more than 5 cm. It must be remembered that a deep bend may look unnatural at a lateral perspective.

Restoring the boundaries of the beard

No one is safe from errors, especially if the process of modeling vegetation on the face occurs for the first time. If you did not work even, you should not resort to radical methods, you can try to correct the situation.

To correct the incorrectly designed beard, it is necessary to adhere to the following recommendations:

  • It is necessary to forget about the razor machine, until erroneously remote hairs grow to the required length;
  • vegetation at this period of time is trimmed with a trimmer for grass with the desired nozzle;
  • After 2-3 weeks, when the hairs grow back, you can re-try to give the correct beard shape.

Make a stencil with your own hands for a beard contour

Espanyolka is one of the most stylish and elegant types of beard that has ever appeared on the male face. So it was in the days of gallant musketeers, so there are today.

  • Modern men value Espanyolka for giving sophistication to the features of almost any (with the exception of a particularly round) face.
  • This aristocratic beard never went out of fashion and has always been relevant.

If we want to get acquainted with the rating of the most popular types of beard, there is no doubt that the subject of our conversation will certainly enter their first ten.

What is an escapanol and who is recommended to wear it?

Espanyolka is a small island of vegetation left under the lower lip in the very center of the chin that has the shape of a wedge.

Espanyolka is sometimes mistakenly called a goor. In fact, these are different types of beards that differ in shape (the outlines of the Espanyolka is more rounded) and the area occupied on a round part of the male chin. Espanyolka occupies all its roundness, the goat beard is much already.

  • Espanyolka can be equipped with a mustache and wide bucks, at the same time it is often worn without additional accessories.
  • There is still a miniature option, which is only a small strip of hair under the lower lip. Most often, a combination of this beard and stylish short antennae is found.

Men with what type of appearance can wear such a beard?

We emphasize once again: Espanyolka does not fit only chubby men. On the faces of all other types, it looks impeccably.

It gives special romanticism the appearance of thin men, and burning brunette acquire with its help a special attractiveness for the fair sex, who prefer communication with true macho.

Types of escanols

The variety of escanols can be reduced to three main types. They are:

  • Classic, representing a neat, pointed wedge without a mustache, deployed throughout the area of ​​a round chin.
  • Vandaikovsky (a beard in the style of van dike). The beards of this species perpetuated the memory of Antonis Van Deek-the famous Flemish portrait artist who lived in the 17th century. This variation of the Espanyolka is a wedge.shaped island not connected to elegant thin antennae.
  • Circular. The beards of this species are devoid of a characteristic wedge.shaped shape, being a very attractive combination consisting of thin antennae connected with a small rounded island covering the central part of the chin. At the same time, the lower lip has a fairly wide base of hairs. On the sides of this base, gaps are left, in need of regular shaving.

How to grow and arrange an escanol?

Giving a beard is a very responsible step that radically changes the appearance of a man, so it requires a certain preparatory period.

Preliminary steps

  • Having removed the razor away, vegetation on the face is given complete freedom. Since the hair on the face of a man can grow in the most unexpected way (the fault of this is a genetic predisposition), before letting go of the digitalis, it is necessary to make sure that they are in the desired areas of the face. This will become obvious after a few days.
  • After making sure that the hair in the right zone grows without problems, you can calmly wait for it to become a little longer. If there are few of them there or they generally refuse to grow in the area of ​​the chin, a man should think about a beard of a different species.

How to quickly grow a beard.

  • Mentally introducing his image with Espanyolka on his face, the young man should think over several possible combinations of its length and shape. This can be done using information obtained from illustrated magazines and sources on the Internet. A great opportunity to choose for their face beards of different species provide computer modeling programs for appearance. They are on the Internet and in good hairdressing salons.
  • Having decided on the choice of shape and the desired length, you can proceed to the formation of a beard.

The stage of the formation of the Espanyolka

How to make a stylish escapanol?

  • Any beard begins to form along the edges, and this should begin. Carefully acting with a razor, they begin to remove excess hairs, planning the desired outline. At the same time, they monitor the strict symmetry of the beard created.
  • Perform the operation to outline the outlets of the Espanyolka circuit (a razor machine) or an impeccably sharp blade.
  • Since the direction of the growth of hairs on the face is never constant, it will have to operate with a blade in different directions.
  • If the beard is equipped with a mustache, it is necessary to determine their shape. If desired, you can make a small gap between the mustache and the nose.
  • Concluding the formation of the beard, they give it a wedge.shaped shape, pointing the corner (if the form of a traditional wedge is chosen as a sample). If it is assumed that the Espanyolka will be Vandaikovskaya, the corners should be performed on both sides of the chin.

How to make an espanol-a master class in

What is a shaving template for a beard and how to use it?

Beginners who are not confident in their abilities, you can purchase a special template for the formation and shaving of a beard. You can buy it both on the Internet and in a specialized store offering goods for stylists.

Contour of the beard: how to make a edging?

Today’s article will be interesting for both lovers of small bristles and fans of a thick full beard. The most common mistake of such men is the complete absence of a vegetation edging on the neckline because of which the beard’s contour becomes greased and the overall impression of sloppiness and gloomy is created.

The bristles simply need special care, which includes styling. To create the correct shape and clear contours of the beard, it is necessary to adhere to certain rules and know what to do in any case, so as not to spoil the chosen shape.

Why is it necessary to design a neckline?

Incorrect fishing line for a trimmer of a beard on the neck. an error curve uneven edging can ruin the whole impression of a brutal image. A neat stylish form has an even and clear fishing line for a trimmer on the neck. There are men who refuse such styling and leave hair on the neck in a natural form. But lovers of the classical form understand that in their case it is unacceptable to leave sticking and uneven hair on the neck and cheeks. Only a special image and style of clothing can beat an inaccurate shape. That is why the bulk of the stronger sex is recommended to carefully care for the vegetation on the face and monitor its shape and edging.

Errors in the design of the contour of the beard

In order for the vegetation on the face to look neat and stylishly it is very important to determine the correctly its outline in the neck area. The most common mistake is an uneven or too high fishing line for trimmer edging. As a result of improper design, the beard visually seems to be a curve and a small. If you make the lower border of the beard on the neck too high (on the ledge of the jaw), then when viewed from the side it will seem that the face is too large for the selected shape.

How to make a edging beard and mustache?

In order for a beard on the neck to have a correct and neat fishing line for a trimmer, one trimmer for grass will be enough for a trimmer.

  • In order to make an exact fishing line for a trimmer, you must use a nozzle with one blade. In the process, you should not rush all movements should be smooth and clear. You can slightly dilute the shaving product with water so that the razor slides easily. It is recommended to shave hair against their growth.
  • Before starting the haircut, wrap your face with a heated towel for several minutes to steam naughty bristles and open the pores. Do not press much on the razor so as not to injure the skin. After the end of the work, attach a cool towel to tone the skin and close the pores.
  • Initially, before making a beard’s edging, it is recommended to align the total length of the hair. To do this, a troika nozzle is put on a trimmer for the grass, which needs to go through the entire surface of the hair and align them. After that, we change the nozzle to a unit and proceed to clean shaving from the admire towards the jaw. At the same time, it is necessary to ensure that the distance to the jaw remains at least 5 cm, otherwise the appearance of the beard will become, to put it mildly, bad.

After the end of the work, you need to wash the bristle using shampoo and balm to cleanse the skin of the face of dust and cut hair. Use cosmetics with natural components that will make the hair soft and obedient, which will help to direct it in the right direction with the help of a ridge.

Template for creating a beautiful beard contour

There is a certain template for edging a beard, because on how to shave a beard on the neck and trim the mustache, it depends on whether the final result will be stylish or failure.

Do not fully rely on templates. Each person has its own characteristics of the shape of the face, the length of the chin and the bulge of the cheekbones, so it is worth knowing the rules for the design of the beard, but it is necessary to adjust them for yourself.

Before starting work, it is necessary to find a triple mirror in order to be able to evaluate the shape of a beard from all sides.

Further before taking up the trimmer for the grass, it is worth mentally drawing several boundaries. In order for the lower border of the beard to be beautiful, it is necessary to mentally draw a fishing line for a trimmer from the ear through the upper neck (above the Adam apple) to the second ear.

The second step we hold another line, which passes along the line of bacenbard to the intersection with the first line. All that remains behind these lines can be safely removed using a trimmer for grass.

Next, go to the cheeks. If the hair does not grow too high, then you can leave everything in natural form. But if the vegetation reaches the eyes and completely hides the cheeks, then you just need to get rid of this effect. To do this, a fishing line for a trimmer from the front of the bakanberds to the mustache line is carried out. The segment can be either even or slightly curved. All the hair that remains on top of the line can be safely getting rid of.

It is important to understand that you will have to maintain this form constantly. The frequency of repetition of the creation of even edging lines directly depends on the hair growth rate. Some men will have to trim its borders daily to preserve the “corporate” type of their beard, but no one said that it was easy to start a beard!

I would like to add that neatly designed vegetation on the face several times improves the appearance of a man and makes his image expensive. The process of creating a edging itself is not complicated, but requires free time and effort. Regardless of what type of beard is chosen to preserve the creative or classic shape will have to trim, cut and maintain the exact lines.

Advantages of stencils

The beard template has undoubted advantages, once using it for its intended purpose, it is difficult to continue the haircut without this device.

  • The simplicity of the performance of many functions, ranging from the care of the bristles, mustache, and ending with bacenbards, temples, eyebrows.
  • The possibility of joint use with a trimmer, a razor.
  • Lack of need to spend money on the work of masters in barbershopes.
  • The compactness of the device that allows you to take it on trips, business trips, vacation. To always be able to maintain your own well.groomed appearance.
  • The possibility of applying for haircuts in an intimate area, including women.
  • Significant time savings: all correctional procedures will take no more than 5 minutes, without the need to go to the hairdresser salon.
  • Complete safety during operation.
  • Earling of labor for the correction of beard, mustache.

What are the templates for haircuts of the beard

A beard shaving template is selected according to the type of haircut that is present in a man. The latter, by the way, is selected, focusing on the type, human face shape.

Oval.shaped owners are lucky, almost all models are suitable for them. Men with a round type are suitable options for goat or trapezoidal beards. Triangular view will decorate square or round shapes.

Separately, it is worth noting the shade of hair: blondes are suitable for any model, while it is better for brunettes to prefer compact haircut options.

  • The box is a classic where the cover is smoothly trimmed, the hair is distributed evenly, slowly flowing into a mustache;
  • skipper. is a middle lane passing from one ear to another, slightly clinging to the fishing line for the trim of the chin;
  • goat. design, which has a slight lengthening to the edge of the lower jaw;
  • Anchor. resembles the appearance of the object of the same name, is represented by a narrow strip, which falls down, where there can be short or long hairs;
  • Franz Joseph-here the strip falls from the ear, goes to the mustache, but the chin does not reach;
  • Espanyolka is an asymmetric oval passing above the upper lip, expanding below.

To create a style of Espanyolka on your own face, a goer’s goer, or to design a different shape, you need to purchase a suitable version of the stencil.

There are different variants of such a pattern that differ in shape, size, materials of manufacture. They can be equipped with a comb, a ruler or not to have them at all.

It is important to select the tool for your own style, given the shape and length of the vegetation. This is the only way to be sure that the use of the device will be convenient, allowing you to achieve your goals.

What is required to work?

For the manufacture of a stencil, with which you can independently maintain the shape of a beard in perfect condition, nothing special or specific will be required.

  • scissors;
  • Chancellery “layout” knife;
  • ruler and rhealle;
  • roller scale;
  • pencil;
  • eraser;
  • marker;
  • protractor.

Of course, not only tools, but also materials will be needed for work. In this case, a piece of dense, but quite flexible, not brittle and not loose cardboard will be required. You will also need tape.

Step One: Measurements

Start the production of a stencil with a measurement of the face and finding the necessary proportions. The measurement should be done as follows:

  • put a perpendicular along the shift line;
  • From this line at right angles, measure the distance to the highest point of the beard located near the ear.

As a rule, for most men, this distance is about 12 cm. But, of course, there is no single size suitable for all men, because everyone has different faces, and everyone grows a beard in their own way.

The second measurement that needs to be carried out is width. It is measured in two different places:

These measurements are extremely important. You can not round the received numbers. That is, if the size turned out with millimeters, then do not round the number either in large or less. The result of the use of the stencil depends on the accuracy of measurement.

An important point: everyone has different faces and some men need to measure the width of not two, but in three sections. The third fishing line for a trimmer measurement takes place at the level of the lower jaw.

Step two: drawing out contours

After the measurements are held, you need to transfer them to a sheet of cardboard. The procedure is simple:

  • draw a horizontal fishing line for a trimmer corresponding to the size of the width of the face in the upper part;
  • From the ends of the line, draw two vertical, corresponding to measurement of lengths;
  • complete the square of a thin “black” line in the lower part;
  • find the middle and draw in the center an axial fishing line for a trimmer;
  • In the lower part, draw a fat line, which should be divided equally with an axial feature;
  • Combine the ends of the lower and upper line with arcs, drawing them using a rheat.

During the construction of the drawing, transportation will be required. The rhealle can be moved if the circle is not able to conduct a holistic line.

It is necessary to place a drawing on a sheet of cardboard so that in the finished stencil, in its lower part, a corner is formed,

Step Three: Cut the stencil

At this stage of work, you need to arm yourself with scissors and a clerical knife. The process of cutting the stencil is no less important and complex than measuring and drawing an arc.

It is especially difficult to cut the arc so as not to go beyond the line. The easiest way to do this is with the help of a stationery knife, but the cardboard sheet needs to be well fixed so that the fishing line for the cutting trimmer does not go past the features of the arc.

Step Four: apply markup and seal with tape

Marking is not necessary, but with it the stencil can be used more productively. Yes, and a homemade universal “brand” looks more solid with marking. Marking is applied to the side lines of the triangle and is a simple line scale.

Adhesive tape is required in order to make a stencil resistant to wear. In other words, a transparent adhesive tape in this case performs the same function as lamination. If there is an opportunity to laminate a stencil, then you can not use adhesive tape.

If the cardboard stencil will not be particularly convenient due to the subtlety of paper, then its base can be made more rigid by gluing a piece of soft thin plastic to it.

How to use a stencil?

Using a stencil is very simple. With it, you can arrange a beard, like an expanol or give it a neat natural form.

The stencil must be put to the face and looking in the mirror move it below the chin. Thus, an oval fishing line for a trimmer, fully corresponding to the natural proportions of the face, will shift below the chin. A fishing line for a trimmer of the axis must be kept right in the center.

The offset should correspond to the desired length. Next, cut the hair of the beard exactly along the line. The next stage of the stencil must be shifted to the sides and trim in accordance with the line.

Thus, you can maintain the perfect natural shape of the beard.

Espanyolka is made out differently. The difference is that stencil should not be shifted down, but up. Correct a beard in the form of an espanolka should be on the bottom of the stencil.

Found a violation? Complain about

A comb for a beard

Today it is fashionable to wear a beard, it gives strong floor brutality and masculinity. In this regard, the establishment of the Barbershop type has gained popularity. Services in such workshops are quite expensive.

Many men had to abandon the beard due to the inconvenience related to the care of her.Constant irritation on the skin, inability to support the symmetry of the contours is unlikely to be pleased.

Buy a shaving template for a beard, and you can independently care for the main male decoration of your face.

A stencil for a beard

If you are the owner of a luxurious beard, then most likely you know how to care for her. So that the bristles grow evenly and look aesthetically on the face, it must be periodically cut and combed.

You can beautifully decorate the beard and form it in specialized hairdressers.

But if you are sorry to spend money on a barbershop, you can try to put your face in order at home using a comb for a beard cutting.

A comb for a beard is an accessory of an unusual shape, with the help of which you can comb even the hardest bristles. Massage by the crests of the crest, you improve hair growth and set them the right direction.

The hairs will lie one to one, and have exactly the form that you need. Say “no” sticking bristles and tangled hairs.

With this accessories you can provide the desired care of your beard at home.

Assessoire for a beard is made of durable plastic. Rare teeth make it possible to carefully comb the bristle.

If you are unhappy that the beard grows too slowly, try to comb it with this accessory twice a day.

Thanks to the resulting massage during the procedure, you will improve blood circulation, and the hairs will grow faster. Proper care also prevents the problem of ingrown hair, which can provoke irritation.

Beard Bro

The comb for the beard has a convenient size and easily fit in the glove compartment of your car or in the of the coat. You can store it in the desktop box, because at work it is most important to look presentable and accurately.

Buy a beard template. Every morning, combing a beard, you can give her uniform in a few minutes and spit extra hairs right during the morning toilet. If you care for vegetation every day, then you will not need to spend an hour on the correction of the circuit.

A loan for a beard has the shape of a boomerang, on the one hand there is a comb itself, and on the other a flat handle, which serves as a pattern. The thin edge makes it possible to tightly apply stencil to the face and give a symmetrical shape of the beard. With the help of a stencil for a beard, you easily bow whiskey and the contour of the beard without violating their shape.

Just attach a stencil to the edge of the beard, and ware a regular machine. Then do the same procedure with the other side of the face. The stencil is suitable for caring for any vegetation on the face.

If it was a three.day bristle, which must be emphasized with a beautiful contour.

Stylish digitalis that requires thorough modeling or thick beard, which just needs to be combed well, Beard Bro will become your assistant anyway.

If you decide to let go of the beard, you should be prepared for the fact that you will need to carefully care for it. Beautiful beard, certainly worthy decoration of any man.

However, without proper care, vegetation on the face will only talk about untidiness and banal unwillingness to shave. Any self.respecting man who decided to grow a beard must buy a comb for a beard.

In order not to go bankrupt from permanent campaigns in the barbershop, use a comb for a beard Beard Bro and to care for bakes or a mustache.

For these purposes, another accessory was invented, which will put in order not only a beard, but also another vegetation on the face. The comb for styling beard and mustache is made of the same material and has what form, as well as an accessory for a beard.

This accessory has crests on both sides, one more for a beard, the other smaller. for mustaches and bake. In one movement you can put in order all the vegetation on your face. A stencil for cutting a beard and mustache has a special brush brush brush.

A pattern for a beard

With a beard cutting template, you can make any modeling of bristles in a few minutes.

The comb for modeling the beard is made of durable plastic, which gives confidence in the durability of the comb. Smooth surface and environmentally friendly material do not allow bristles to be electrified.

Rare teeth allow you to evenly distribute the gel for styling vegetation and give it more distinct contours.

Buy a stencil for a beard, and you can simplify the procedure for haircuts of vegetation to a minimum. A beautiful beard will not only give masculinity, but also emphasize your personality.

Advantages

  • Combs even the hardest bristles;
  • Makes it possible to independently arrange the edge of the beard;
  • Compact size;
  • Suitable for professional and home use;
  • Allows you to save on a paid haircut and correction;
  • A good present for owners of beard and mustache.

Be an extravagant man: Espanyolka beard. Types and photos

Any man who has a neat and stylish beard acquires an image of a confident and exquisite person. And if you hold a rating among the most extravagant and beautiful men, we can no doubt say that the first positions will take the stronger sex with the Espanyol beard.

This type of beard was fashionable during musketeers and now it gives a man to a man some sophistication and aristocracy. The beard is spectacular and self.confident men. Want to look clearly at Espanyolka, photos to your service in this article.

Despite the variety of escanols, they are divided into three main types.

Classic style

At the beard of pegs has a neat pointed shape over the entire area of ​​the chin. Such a type has no mustard of a beard.

Vandaikovsky

This type of beard was named in the Honor of therected Flemish artist Antonis Van Dyck, who wore such a beard. It consists of a wedge.shaped island on the chin and is not connected by thin, elegant antennae.

Circular beard

It does not have a wedge.shaped shape and consists of an original combination: thin antennae are neatly connected to a rounded island in the central part of the chin. On the lower lip there are rather plentiful antennae, on the sides of which there are no hairs.

What Espanyolka looks like?

Those who have seen such a beard at least once will never confuse it with others.

Espanyolka is a small rounded island of hairs on the chin under the lower lip in the center.

It passes throughout the chin in the form of a rounded edging.

Espanyolka can be with elegant antennae or combine with backed. But if desired, it can be worn without them.

Some men prefer to leave only a thin strip under the lower lip, but still a more common option is a beard with thin, short antennae.

The beard of this style is satisfied with the original and suits all men who have any oval of the face.

How appeared?

It was the Spaniards who became the first to introduce a beard of Espanyol into fashion. During the Crusades, this type of beard was quite popular among soldiers.

They thoroughly shaved, leaving the hairs around the lips and under the lower lip, not touched on their face. Since the 16th century, many noble nobles in Europe began to wear Espanyolka with pleasure, thereby emphasizing their status in society.

Sometimes the barber had to spend not a single hour of time so that the nobleman was exquisite and beautiful escapanol.

Henry IV himself was the owner of such a beard, introducing this element of jewelry. Therefore, we can safely say that it was from these times that Espanyolka beard became fashionable and has not lost popularity until our time.

For centuries, it changed its name, but the English version of Imperial is considered the most beautiful, since in translation it means a majestic.

Peculiarities

The most important thing is that the beard gives the image of a man a kind of charm and attractiveness. Espanyolka looks very elegant, even aristocratic.

She not only hides the shortcomings, but also favorably emphasizes the lower part of the face, sculpture, lips. Thanks to small bristles, it looks well.groomed, giving its owner masculinity with a note of grace, independence and success.

It is quite difficult to take care of a beard yourself. It is recommended to entrust your appearance to the experienced master.

beard, template

If you have made a choice in favor of the Espanyol beard, the photo is attached below.

Who is suitable?

Espanyolka is a universal look of a beard that is ideal for all men except those who have a round oval of faces. The beard looks very beautiful on thin men.

In this case, the whole image acquires a touch of aristocracy. No wonder it is very popular among celebrities of show business.

Espanyolka. ideal for burning brunettes. She gives them a special charm and attractiveness. Without any doubt, it can be argued that such men will easily win the heart of the fair sex, which will not be able to resist the real macho.

Fashionable beard “Spaniard”: how to do it yourself?

Spanish beard. decoration of a real man. This type of beard choose confident men, real macho, kidnappers of female hearts. No wonder it is the Spanish beard that is the most popular among the most popular Hollywood actors: Johnny Depp, Brad Pitt and other handsome men flaunt precisely with Espanyolka.

In the article we will consider in more detail the features of the Spanish beard: find out how to grow it, how to prepare a face, how to care for such a beard. We will also touch on other important questions about this topic.

Description of the “Spanish” beard

It should be noted that the Spanish beard is chosen by men who know what they want from life. This is a rather bold version of the formation of vegetation on the face, so for weak and uncertain men it does not fit. The Spanish beard is a great way to emphasize the originality of appearance, highlight expressive eyes, emphasize interesting facial features.

Do not confuse the Espanyolka and goat beard. The Spanish version has a much more rounded outline, and occupies a much more extensive area.

If the classic Spanish beard emphasizes the sexuality and adventurous character warehouse of a man, then it is also suitable for calm men, reliable family people and fathers in combination with backs.

Despite the popularity and style of Espanyolka, not all men can choose it. This type of beard goes mainly to people who have the shape of a person close to the perfect. the correct oval. It should also be noted that men with soft feminine facial features can give masculinity, make their face more sharp, clear.

Espanyolka looks especially good if a man has a thin physique, as they give their appearance a certain share of romanticism. Even if the man himself is in nature. absolute pragmatist. And the Spanish beard on the brunettes looks most advantageous, as in this case gives a little “Mephistopheles” chic, vicious and attractive.

How it looks?

Outwardly, this interesting and sexual type of beard is perfectly shaved cheeks (but a slight bristle is also acceptable), a corner of hair is exactly in the middle of the chin, as well as often short straight antennae.

1 minute Beard Grooming and Beard Trimming. Beard Shaping tool

This is an ideal option for men with an adventurous and romantic character warehouse, for real dreamers.

Under the term “Spanish beard” hides more than one type of beard, but several. We will tell you more about them.

Classic

This is the most common option, the most popular, base for everyone else.

In this case, the wedges of the beard have a pointed pronounced shape, in the upper part it occupies the entire area of ​​the chin, and gradually narrows down. There are no mustache in the classic version.

Vandaikovskaya

As the name implies, the “founder” of this type of beard is considered by the artist Van Dyck, who is the most famous carrier.

In this case, the Spanish beard is a small island in the form of a wedge on the chin, as well as in the composition, thin antennae of elegant form take part.

Here, Espanyolka does not imply a wedge, but is a connection of thin antennae with a round island on the chin.

How to do it?

We find out how to grow an Espanyolka.

Under this condition, the Espanyolka will look neat and beautiful, it will have clear boundaries, which is necessary.

Bear’s Beard Care All in One Beard Shaping Tool for Men

I must say that the growing of the Spanish beard will not cause special difficulties. And if the hair on the face grows quickly, then the acquisition of Espanyolka is a matter of literally one week.

  • If the vegetation on the face has not yet reached the length, do not bother at all. Tear out for several days to then form a chic Spanish beard from inaccurately growing hair.
  • When the bristles have already reached the required length, you can start cutting the beard. The most attractive and accurate manner is an espanyolka if the length of the hairs is about 2 cm or a little less. If the length of the beard is more than 2 cm, this option may look already sloppy, and it will be more difficult to care.
  • If the beard grows poorly or unevenly, it will be logical to use the help of special drugs of medicine or cosmetic nature to help to solve this problem.

How to prepare a face?

So that the Spanish beard becomes a real decoration of the face, the skin and hair must be prepared. We give a few recommendations that will help you achieve the desired result.

  • Rinse the grown beard with warm water with the addition of shampoo regularly: this measure will help remove all pollution. If dandruff appears (and this problem happens with the beard), use special tools that will help to eliminate it. Dandruff and stylish escanolka. incompatible things.
  • To accelerate hairs growth, grease the beard with castor oil at night, burdock is also suitable. These inexpensive, but effective and time.tested funds are available in the pharmacy, so there will be no problem with their acquisition. As a result of their use, the beard will become thicker, even, hairs. thicker. In addition, the beard will have a pleasant glossy tide.
  • Use cosmetics: masks, lotions, creams that have a beneficial effect on increasing hair growth and their density, strengthening.
  • Normalize your diet. In order for the beard to grow dense, strong and healthy, it is necessary to include more vitaminized products, dairy, from fiber and minerals in the diet. This measure will benefit the whole body as a whole, as it will also make it healthier and stronger, raise immunity.

About the author

| Denial of responsibility | Contacts |RSS