No water in the dishwasher

The water doesn’t flow into the Bosch washer-dryer: the causes

The quality of assembly of appliances by the German corporation Bosch is known throughout Europe and beyond. But even the most reliable appliances are not insured from failures. Most problems are often blamed on violation of operating rules, incorrect installation, voltage fluctuations, etc. д. Therefore, the manufacturers have nothing to do with most failures. In dealing with the real causes of the fact that the dishwasher “Bosch” has no water supply, let’s note such moments:

water, dishwasher

It is important! Do not try to find the cause of failure of the module yourself: its repair is the task of specialists. You need a special tool and some skills.

Reliable dishwashers from Miele

If the dishwasher breaks down, it’s worth weighing the pros and cons of repair and considering an alternative solution. buying a new appliance. The manufacturer Miele offers innovative equipment, which impresses with its cost-effectiveness, pleases with a wide range of functionality. Besides, the brand provides an official guarantee, and the quality of service is worthy of the highest praise.

The Miele range offers 9 and 14 place settings. It is necessary to determine a set of programs, taking into account your own needs. Most often in any home are relevant modes such as “Automatic Wash”, which starts with a single touch, “Intensive”. for particularly heavy soiling. Another popular option is the half-load mode.

In order to care for the environment and for the sake of maximum savings of water and electricity it is worth to consider a model with the program “ECO”. If you want to run the equipment at night without disturbing the sleep of the family, the mode “Extra Quiet Wash 40 dB” is relevant.

The brand installs the reliable leak-proof system Waterproof. For nobody to interfere with the process of operation of the equipment and not to disrupt the program, the lock of the control panel is provided. Particularly useful in homes with children.

It is very convenient that you can set the delayed start so that the appliances themselves turned on at a certain time. If desired, you can find in the Miele range of models with connection not only to the cold, but also to the hot water supply.

Water supply error codes

Brand code
AEG i10, iA0
Ariston A10
Beko 0000
Bosch E3, E8
Candy E1
Electrolux i10, iA0
Indesit Al02
Hansa E1
Krona E1
Miele F12
Samsung E1
Siemens E3
Whirlpool E5

Your dishwasher wouldn’t take in water: causes and solutions

Today’s essential kitchen helper is the dishwasher. This home appliance can wash all kinds of dirty dishes cleanly. But as with any appliance, various problems can also occur with it. Owners often find that their dishwashers can’t get any water in. It can indicate both serious breakages and minor defects, or connection errors.

Door not closed

Symptoms: Dishwasher will not draw water and washing programme pauses quickly.

Maybe you didn’t close the door tightly enough in a hurry, got busy with other things: Close the door until you hear a distinctive click.

Re: dishwasher and water pressure

How many times do I have to write with problems you NEED to know the pressure, well the fifth floor in one house is not equal to the fifth floor in another. What do you mean all checked ? Looked like it? Measured the pressure, read the manual what is needed? The aquastop hose sometimes clogs very quickly because of the built in filter, and t.д. and t.п. MANOMETER in front of the dishwasher in your hands before checking, or professionals who checked everything. Sorry for the harshness, but it’s the same as asking me something hard to breathe, and you have all good in the village?

Zenit User Post: 80Registered: 10 Mar 2015, 01:01 pm Thanked (a): 0 times. Thanked: 0 times. Reputation points: 2

The main reasons why the dishwasher doesn’t draw water

If the connection of the dishwasher to the water supply is done correctly and there are no breaks in the water supply, the lack of water can be due to the following reasons:


  • clogging of the inlet filter or the whole system;
  • the door mechanism is out of order;
  • the “Aquastop” protection has been triggered;
  • Failure of the inlet valve, due to which the flow of water is blocked;
  • the pressostat is defective;
  • the control unit is defective.

Over time, dishwasher owners find that after the washing program ends, dirty water does not drain out. Modern appliances alert you to this problem with an audible signal or an illuminated error lamp. There are several reasons for stagnant water. Of these, you can fix the following on your own:

Other causes require the intervention of a specialist:

There is always a small amount of water at the bottom. If it is clean and does not exceed 1 cm, this is specially provided for by the design, so that the rubber seals do not dry out over time.

Possible malfunctions that can cause water not flowing into the dishwasher

The dishwasher program has a certain amount of time in which the tank is filled with the amount of water necessary for washing. It depends on the model and is 10-15 minutes. If there is no signal from the water level sensor to the control unit within the set time period about the fullness of water, the machine stops the selected program.

In appliances without display, water indicator starts blinking: the button with the faucet, the “Water” or “End” button. On the displays of the modern models that are equipped with a self-diagnosis system, the following error codes appear.

The error code combination related to the water supply varies depending on the brand of dishwasher:

  • Bosch and Siemens displays code E3 or E8;
  • on the display of Candy, Hansa, Krona and Samsung. E1;
  • on the display of Beko. 0000;
  • On the Ariston display. A10;
  • IE appears on the LG display;
  • Indesit display. A102;
  • i10 or iF0 on Electrolux and Zanussi display.

Advice. If after an error code appears, the machine tries to continue operating, it is turned off so as not to burn the electric heater.

If the dishwasher does not draw any liquid, it is checked first:

Dishwasher Won’t Fill With Water — Dishwasher Troubleshooting

  • Water availability and pressure in the faucet. Open any faucet in the house to make sure the water is not turned off during maintenance or repair work.
  • Stopcock. When connecting the dishwasher to the water supply pipe a special shut-off valve is installed. To be able to shut off the water. If it is blocked, it is opened to get the appliance running.
  • Household appliance door. If it is not closed until it clicks, the program does not start because the control module does not receive a signal to lock the door. After closing tightly, the appliance will begin to draw in liquid.
  • Water supply hose. If it is kinked, pinched, or crushed, no water will flow into the dishwasher and the Aquastop spill protection will activate. After eliminating the above cause, the machine should be started again.

All of the above reasons for not getting liquid into the appliance can be eliminated without much effort. If the water is not turned off, the hose is not kinked and the door is tightly closed, then there is a more serious problem. In this case, unplug the appliance and try to find the cause yourself or call a qualified professional.

What to do if the dishwasher won’t run?

The big family meal is over, the mountain of dirty plates, mugs and salad bowls is piled in front of you, and you easily load all the dishes into the dishwasher but it didn’t work out! Instead of the usual murmur of water you hear a strange hum, or even an ominous silence. Don’t despair: if your dishwasher won’t run, you may be able to fix the problem “right here and now.

How to Repair a Dishwasher that Does Not Fill with Water

  • Water in the tap. Maybe you have not noticed the announcement on the door of the entrance about preventive works? Check the taps in your home to make sure there are no problems with the water supply.
  • The door is not tightly closed.If the dishwasher door is not fully closed (no audible click) the dishwasher will not start.
  • Water supply valve. The dishwasher is connected to the water mains with a special shutoff valve to shut off the water supply. This is done for safety, but also to prevent constant pressure on the inlet valve. The valve is usually located on the water mains to which the dishwasher is connected. Just open it, and the machine is ready to work.
  • The hose through which water enters the dishwasher.If there’s water and the shut-off valve is open. it’s time to check the hose. It may be jammed, and, accordingly, the water supply to the “dishwasher” is blocked. Make sure there are no serious kinks in the hose or heavy objects lying on it. If that was the problem. try running your helper again.

But what to do if you have done all these tricks, made sure there is water in the tap and everything is all right with the hose, but the dishwasher is still not getting any water? Then there is some kind of malfunction. Therefore, unplug the appliance from the mains and try to determine the type of breakdown with the help of the table below.

| Denial of responsibility | Contacts |RSS