Paint for stoves and fireplaces alpha

Heat-resistant paints for ovens

Heat-resistant Enamel HAMMER KO 800 °С, silver, 520 ml, 1 pcs.

Stove Paint

Elcon Heat Resistant Max Therm up to 1000°C Organosilicon Enamel (KO)

Heat-resistant CERTA Thermal Spray Paint Black (520ml) 750g. (12 units/pack)

Elcon Heat Resistant Enamel Max Therm 1200°C Black 520ml

Heat-resistant Certa Enamel White (0.8kg) 400C (15 units/pack)

Heat-resistant CERTA Enamel 1200°C, black, 520ml

Heat-resistant Elkon Red Thermal Spray Paint (520 ml) 800 C (12 units/pack)

Heat-resistant black enamel, Novbythim, 0.5kg

Heat-resistant Certe Enamel Black (0,8kg) 800°C (15/6 pcs/pack)

Heat resistant enamel Zerta red-brown (0,8kg) 500°C (6 units/pack)

Heat-resistant CERTA White (520ml) 400g. (12pcs/pack)

Heat resistant paint “Certa” black (canister)

Heat-resistant CERTA Graphite paint-aerosol (520ml) 750g. (12 units/pack)

Heat-resistant (Enamel) anticorrosive paint (up to 500°C; 0,8 kg) Red-brown CERTA

Enamel NPP Spectr Heat-resistant 400 ° C red 520 ml

Heat-resistant Zerta Colorant-aerosol (520ml) 500g. (12pcs/pack)

Elcon Heat Resistant Enamel Max Therm 1000°C Black 520 ml

Enamel NPP Spectrum Heat Resistant 700 °C silver 520 ml

Certe silver thermal spray paint (520ml) 650g. (12 units/pack)

Hi-Temp heat-resistant paint Hi-Temp up to 650°C matt flat black 400 ml

Heat-resistant Zerta silver enamel (0,8kg) 700C (14 units/pack)

Elcon Heat Resistant Enamel Max Therm 700°C Graphite 520ml

Enamel Elcon Heat resistant Enamel Max Therm 400°C red 520 ml

Airspray thermal enamel Elcon Red-brown (520 ml) 800 C (12 pcs.)

Heat-resistant ETUD Airspray Automotive Enamel

Heat-resistant anticorrosive enamel “Elkon” (silver) spray

Heat-resistant DECORIX 800°C Airspray Enamel RAL 9003 Decorix 0122-9003 DX signal white

Description of paint for stoves and fireplaces Alfavit 1,3 kg

Environmentally friendly heat-resistant paint, forming a silicate-based coating designed for long-term protection of mineral surfaces exposed to high temperatures typical of stoves and fireplaces. When heated does not change color and retains its decorative properties, does not emit odors. High temperature resistance up to 400 C. Can be used for painting stoves, fireplaces, chimneys: plastered, masonry and brick, including with old mineral coating. Does not contain organic solvents.

The manufacturer reserves the right to change the country of manufacture, product characteristics, appearance and completeness without prior notice to the seller. Check with our managers!

Pros:
Cons:
Review: A 1.3 kg can was enough for two large walls of a two-piece stove. It was painted with a brush. There is no smell. It turned out this way. What was stoked in the process of painting. Did not dilute before using, the paint is fresh counted. not for anything. Hiding power is good. Can’t say anything about durability yet. The stove was built by my husband with 19th century bricks. so there are both potholes and “handprints of the brick makers”. For us it is more on a new, even brick. At first we just wanted to leave the brick as it was, but since it was very old and had efflorescence and other spots on the inside of the brick, we first painted the oven (in the spring) with white paint. Some brick imperfections (spots) were still visible underneath it, but after this painting it is gone. I’ll be ordering a second can to paint the rest.

Try the browser extension that will show you the lowest online for Alfa Series Acrylic Paint for Stoves and Fireplaces Semi-Matt :

Paint for stoves and fireplaces heat-resistant white 1,3kg “Alpha

Color: white Coating: semi-matt Interior finish Room type: dry Time of complete drying: 24 hours Consumption: the estimated consumption for a single coat of surface area of 1 m2 is 150 gr. Depending on the type, condition and structure of the surface

ALPHA” STEAM AND CHAMES PAINT is designed for painting stoves, fireplaces, chimneys, on concrete, stone, brick, plaster, putty, except metal surfaces. For use in internal and external works, withstands heating up to 400C. Properties:. Creates a homogeneous matte finish;. high covering power; Instructions for use:. Before application, stir the paint in the container;. Apply with a paint sprayer, brush or roller to the surface in an even layer;. perform the works at temperatures above 5 ° C.

Color: white Coating: semi-matt Interior works Internal works: dry Total drying time: 24 hours Consumption: the estimated consumption for one layer coating of 1 m2 is 150 gr. Depending on the type, condition and structure of the surface

Catalog Catalogue

Information

Info

Contact

Contacts

  • г.Vladimir, ul. Mira d. 63
  • г.Vladimir str. Yurievskaya v. 24
  • г.Vladimir, st. Tractor d. 43
  • г.Vladimir, Vladimirskaya str. Zarechnaya v. 14а
  • info@alidistroy.ru

Privacy policy

One of the fundamental values of the AliDiStroy online store (hereinafter. The Shop) is to ensure the security and confidentiality of data provided by Customers. In order to fully and completely understand this document, please read it carefully.

Definitions and terms

1.1. Website. the Shop’s website, located on the Internet.

1.2. Customer. a natural person using the Shop’s website.

1.3. Personal information. Information pertaining to a certain Customer, as stated in the p. 3.1 1 5 of these regulations.

1.4. Personal data processing. any operation performed with or without the use of automation equipment with personal data, including collection, recording, systematization, accumulation, storage, clarification (updating, modification), extraction, use, transfer (distribution, provision, access), anonymization, blocking, deletion, destruction of personal data.

1.5. Cookies. Data fragments sent by a web-server to a browser when the Client visits the Site. The Company automatically receives certain types of information that are obtained when users interact with the Site. This refers to technologies and services such as web protocols, cookies, web memos, and applications and tools. A cookie is a piece of data that automatically resides on your computer’s hard drive every time you visit the Site. Cookies enable you to store information on the server and help you navigate the web more easily, as well as allowing you to analyze the Site and evaluate the results. Most web browsers allow cookies, but you can change your preferences to refuse cookies or track the path of cookies. However, some resources may not function properly if you disable cookies in your browser.

The purposes and principles of the privacy and data collection policy

2.1. The Privacy Policy applies to any information mentioned in Section 3 that the Shop may receive about the Customer while using the Site.

2.2. The Customer provides his personal data for the purpose:

  • creating an account,
  • provide technical support related to the use of the site,
  • placing orders, notification of order status, processing and receipt of payments;
  • receiving news, information about products, events, promotions or services;
  • participation in promotional actions, surveys;
  • use of other services available on the website, personalized Комментарии и мнения владельцев and feedback, but not limited to.

The data provided may be used for the purpose of promoting products on behalf of the Shop or on behalf of partners of the Shop.

2.3. To ensure the security of data retention and transparency of the purposes for which the personal data are collected. Customer personal data is collected, stored, processed, used, transferred, and deleted (destroyed) in accordance with the law, in t.ч. Federal Law 27.07.Please read the following Privacy Policy carefully and adhere to the terms of the following Privacy Policy.

Information to be processed

3.1. Personal data permitted to be processed under this Privacy Policy is provided by the Customer by filling out the registration form on the Shop’s Website and includes the following information:

3.2. The store also receives data that is automatically transmitted in the browsing process when you visit the site, t. ч.:

3.2.3. Browser information (or other program that accesses the display of ads)

Processing and use of personal data

4.1. Processing of personal information of the Client is carried out without any term limits, any lawful way, including in information systems of personal data with use of means of automation or without use of such means.

4.2. By agreeing to this Privacy Policy the Customer gives the Shop his/her indefinite consent to process his/her personal data, mentioned in section 3, by all the means mentioned in this Policy, as well as to transmit this data to the Shop’s partners for the purposes of fulfilling the obligations undertaken.

4.3. The Company may not pass on information about the Customer to unaffiliated persons or persons not connected with the Shop by contractual relations.

4.4. Transmission of information to affiliates and persons who have contractual relations with the Store (courier services, postal organizations, etc.).д.) is performed for the purpose of executing Customer orders as well as to provide the Customer with information on promotions, services and events.

4.5. Affiliates and persons connected to the Shop by contractual relations undertake to ensure confidentiality of information and guarantee its protection, as well as undertake to use the received information exclusively for the purposes of performing the above actions or rendering services.

4.6. The store takes all necessary measures to protect the Customer’s personal data from unauthorized access, modification, disclosure or destruction.

Client’s rights and obligations

5.1. The Client undertakes not to disclose to any third parties the login and password used by him to identify himself on the Company’s website.

5.2. The Client undertakes to exercise due diligence when storing the password, as well as when entering it.

5.3. The Customer is entitled to change his/her personal data and to request the deletion of his/her personal data from the Shop.

Additional conditions

6.1. By accepting this Privacy Policy, the Customer gives its indefinite consent to receive information on order status, account and other notifications of technical nature, as well as notifications of advertising nature, including, but not limited to, current marketing promotions and current Store offers, by various means, including but not limited to SMS and e-mail. The Customer may refuse to receive such information at any time by changing the account data at the Shop site.

6.2. The company is liable towards the client in cases provided for by applicable law.

6.3. The Company is exempt from liability in cases where information about the Client:

  • The information in this brochure is in the public domain until it is lost or disclosed.
  • was obtained from a third party before it was received by the Shop.
  • was disclosed with the Client’s consent.

6.4. The Company reserves the right to change the privacy policy unilaterally. The changes come into force as soon as they are published on the Shop’s website.

See also  How to clean the glass of stove from soot

Ecoterra stove and fireplace paints. 287 items found.287 items

All-purpose paint for furniture, doors, baseboards, window bindings, radiators, cabinets, etc.д. Helmi Acrylate furniture paint does not turn yellow over time. It is easily applied to new wood, fiberboard, particle board or metal surfaces inside the room.

/ECOTERRA/ 1kg, color: red-brown, does not change color when heated consumption: 180-230 g / sqm

Acrylic;. stone, concrete, plastered surface, brick, for interior work, for exterior work; base: 6, 5; gloss grade: semi-matt; coating: opaque

Elcon Max Therm grey corrosion preventive enamel up to 400°C (aerosol 520 ml) for protective and decorative painting. Heating stoves, boilers and fireplaces;- Heating radiators and pipes. chimneys and air ducts;- smokehouses and braziers;-automotive sinks;-highway chimneys and ducts.

Elcon Max Therm red-brown thermal corrosion-resistant enamel up to 700°C (520 ml aerosol) for decorative and protective painting:. Heating furnaces, boilers and fireplaces;. Heating radiators and pipes. chimneys and ducts;- smokehouses and braziers;- cars.

Processing material: metal, concrete, plastered surface, brick, gloss grade: matte, for interior works, for exterior works, number of components: single-component, type of coating: hiding, base: silicone, primer enamel, heat resistance, frost.

Elcon Max Therm Black 1200 degrees 0,8kg 00-00004050

Processing material: metal, concrete, plastered surface, brick, for interior works, for exterior works, number of components: single-component, type of coating: hiding, base: silicone, primer enamel, heat resistance, cold resistance. UV protection.

Product Type: Enamel; Brand: Certa; Type: Organosilicon; Purpose: For Facade, For Radiators, For Ovens, For Cars; Weight/Volume, kg / l: 0,520; Color: Black; Gloss: Matte; Surface Type: Concrete, Stone, Metal; Type of Work: Interior, Exterior; Type of Work.

Paint for stoves and fireplaces heat resistant “ALFAVIT” white 1,3 KG (6) series Alpha

Type: alkyd, material handling: wood, for exterior use, base: BM, 1 (A/BW), 3 (C/BC/D), A, gloss grade: semi-glossy, type of coating: hiding, number of components: single-component, maximum consumption (sqm).m/l): 13, thinner: solvent

Semi-matt alkyd paint. Metal and wooden surfaces indoors. Empire is a paint developed especially for wooden and metal furniture and garden furniture. It is odourless, easy to apply and easy to tint.

Water-borne, tintable acrylate paint that gives the surface a pearlescent effect with a noble metal sheen.A Thousand and One MoodsTikkurila Taika pearlescent paint magically transforms spaces. Its pearly glow and shine of precious metals.

Elcon Max Therm grey corrosion preventive enamel up to 400°C (520 ml aerosol) for protective and decorative painting:. Heating stoves, boilers and fireplaces;- Heating radiators and pipes. Chimneys and air ducts;- Smoke chimneys and braziers;- Automobile toilets and brush stoves;- Wooden furniture and metal furniture.

Product Type: Enamel; Brand: Certa; Type: Organosilicon; Purpose: For radiators, For facade, For cars, For stoves; Weight / volume, kg / l: 0,520; Color: Black; Gloss: Matte; Surface Type: Stone, Concrete, Metal; Type of Work: Interior, Exterior; Type of Work.

Elcon Max Therm Black corrosion-resistant enamel up to 1000°C (aerosol 520 ml) is suitable for protective and decorative painting of. Heating furnaces, boilers and fireplaces;. Heating radiators and pipes. Chimneys and air ducts;- Smoking chimneys and grills;- Automobile chimneys, stoves and hoods.

Designed for protective anti-corrosive painting of metal equipment of oil, gas, and steam pipelines, furnaces for burning waste, as well as for painting of car exhaust systems, engine parts and other metal surfaces, operated in conditions of the.

Type : silicate, material used: stone, concrete, plastered surfaces, bricks, interior work, exterior work, gloss grade: matte

Water-borne acrylic heat resistant paint. Designed for painting of plastered, masonry and brick stoves. Withstands heat up to 400 ° C

Heat-resistant Zerta enamel for painting of grills, stoves, fireplaces and metal structures. Color terracotta. Temperature resistance up to 600 °С

Processing material: metal, for interior work, for exterior work

Processing material: stone, metal, concrete, plastered surface, brick, degree of gloss: matte, for interior works, for exterior works, number of components: single-component, type of coating: hiding, base: silicone, primer enamel, heat resistance.

Treatment material: metal, glossiness: matte, bases: silicone, heat resistance, application: roller, brush, sprayer, minimum consumption (per square meter), thinner.m/kg): 8

bases: silicone, material properties: metal, interior and exterior application, high temperature resistance, minimum consumption (ml/sq.m).м): 520

Processing material: wood, for interior work, base: 5, gloss level: matt

Processing material: metal, concrete, plastered surface, brick, for interior work, for exterior work, number of components: one-component, type of coating: hiding, base: silicone, heat resistance, application area: for radiators, for fa.

Environmentally friendly, high temperature resistant enamel for long-term protection of mineral surfaces, exposed to high temperatures, typical for stoves and fireplaces.Contains no organic solvents. Not intended for tinting. At heat-up the top layer of the lacquer can be applied on the surface of the metal surface.

Alkali-resistant acrylate paintApplicationsFor painting of cement-treated concrete bases and plinths as well as fiberglass mineral panels.Designed for high quality painting of concrete bases of residential, commercial and industrial buildings.

Elcon heat-resistant varnish is designed for painting brick, stone, metal, concrete and other types of surfaces exposed to temperature variations in the range from.60°C up to 250°C. The lacquer is easily applicable, suitable for painting stoves, fireplaces and chimneys.

Surface finish: silicone, base material: metal, workmanship: wet workmanship, radiator, plumbing, bathtubs, interior workmanship, exterior workmanship, temperature resistant

Special coating paint for wall and ceiling surfaces with high hygienic requirements.Suitable for painting both new and previously painted surfaces. concrete, plastered, puttyed, brick, gypsum and wood-fibre surfaces in the interior of the building.

Material of treatment: wood, wallpaper, for internal works, for external works, base: 1 (A/BW), 3 (C/BC/D), A, gloss grade: matt, deep-matt, coating type: covering, number of components: single-component, minimum flow (sq.m.).m/l): 12, maximum consumption (sq.m./l.

Zerta heat-resistant enamel is a decorative and corrosion-resistant matte finish for forging and metal structures, which are exposed to extreme temperatures from.70°C to 750°C.Zerta” thermal enamel is used for painting metal stoves in houses and baths, fireplaces, etc.

Base type: organosilicon, processing material: stone, metal, concrete, brick, glass, gloss grade: matte, for interior work, for exterior work, coating type: hiding, heat resistance

Type : latex, material: plasterboard, concrete, plastered surface, wallpaper, brick, for interior work, base: 1 (A/BW), gloss grade: matt, deep-matt, type of coating: covering, number of components: single-component, minimum consumption (sq.m.).m/l).

Water-borne wallpaper and wall paint.Intended for painting all types of wallpaper, ready-made and pre-painted (structural, non-woven, vinyl, textured and double-glazed wallpaper). Also suitable for painting on concrete, plaster, brick, wood surfaces.

Semi-matt water-dispersion paint for wooden facades forms an elastic film on the surface, resistant to atmospheric precipitation, UV-light, humidity and temperature variations. Adheres well to the surface and covers easily. Easy to apply.

Zerta heat-resistant enamel for painting grills, stoves, fireplaces and metal structures. Color of enamel terracotta. Heat resistance up to 600 degrees

Processing material: metal, concrete, plastered surface, brick, for interior works, for exterior works, base: silicone, heat resistance, application area: for radiators, application: roller, brush, sprayer, minimum flow (g / sq.м).

Designed for protective corrosion resistant painting of metal equipment of oil, gas and steam pipelines, incinerators, as well as for painting of car exhaust systems, engine parts and other metal surfaces, operated in conditions of.

Processing material: metal, concrete, plastered surface, brick, gloss grade: matte, base: acrylic (AK), heat resistance

Protection class: metal, base: silicone, material used: wet rooms, radiators, bathroom fixtures, plumbing fixtures, bath tubs, interior work, exterior work

Water-dispersion paint for walls and ceilings with natural marble and optical whitener that gives the coating a dazzling white color. It diffuses light better, enhancing the natural glow of white and visually expanding the space (3D effect): the room you.

Acrylic interior paint forms a white matte finish, easy to apply evenly, dries quickly, does not flake, does not chalk. MAY paint is suitable for painting gypsum board, concrete, brick, plastered and puttyed surfaces, chipboard, wood-fibre board, as well as.

Base type: silicone, base material: metal, interior, exterior, heat resistant

Surface finish: silicone, material: stone, metal, concrete, plastered surfaces, bricks, gloss grade: semimatte, for interior works, for exterior works, temperature resistant

OS-12-03 exterior exterior paint for concrete, plaster. Protects against corrosion, moisture, precipitation. Withstands temperature fluctuations from.65°C to 300°C. Coating life of 15 years. OS-12-03 universal paint protects concrete, plaster, brick, cement, ironwork and concrete reinforcement.

Deep-coat waterborne dispersion paint for high quality wall and ceiling finishes: ideal for fast interior renovation; exceptionally easy to apply; ecological and safe. Must be painted fast and well? Then Euro Smart 2 is the best choice for.

Deep-coat waterborne dispersion paint for walls and ceilings. High adhesion to the surface, prolonging the lifetime of the coating. Ideal for wallpaper under painting and low-use areas that do not require intensive and wet cleaning.

High-quality organosilicon enamel designed for painting of metal products, exposed to heating up to 600 oC: parts of car exhaust systems, pipelines and steam pipes, parts of water heating, boiler.

type : acrylic, material used: plasterboard, concrete, plastered surfaces, wood, wallpaper, bricks, for interior work, base: A, 6, 5, gloss grade: matte, min.m/kg): 5, maximum consumption (sq.M/kg): 7, thinner: water

Paint for stoves and fireplaces heat resistant “ALFAVIT” red-brown 1,3 KG (6) series Alpha

Heat-resistant enamel “Zerta”. a matte decorative and corrosion-resistant coating for forging and metal structures, which are exposed to extreme temperatures from.70 ° C to 900 ° C. The resistance to high temperatures depends on the color. Thermal enamels are used to paint metal stoves in.

Heat-resistant coating, which forms a silicate-based coating, designed for long-term protection of mineral surfaces, exposed to high temperatures, typical for stoves and fireplaces. The putty is used for decorative finishing of stoves and fireplaces.

Zerta heat-resistant enamel for painting grills, stoves, fireplaces and metal structures. Color enamel terracotta. Temperature resistance up to 600 degrees

Surface finish: metal, concrete, plastered surfaces, brick, glass, glossiness: glossy, for interior and exterior use, base: silicone, heat resistant, application: roller, brush, sprayer, minimum flow (ml/sq.m.).м).

High quality heat-resistant corrosion-resistant enamel. Manufactured on German “NETZSCH” equipment with special “ABC Farben” technology. No pre-primer required.Prevents the formation of the color fade (color change when heated). Б.

Metallista paint is an effective solution to protect metal surfaces for up to 10 years. Now you don’t have to compromise, with Metallista you can be sure that you will get the maximum. The wax in the Metallista paint prevents penetration of moisture and dirt.

Semi-gloss alkyd paint for metal roofs and exterior metal structures. Contains an active corrosion pigment. Panssarimaali paint has been tested by time and the harsh Finnish climate. Its active corrosion-preventive pigment reliably protects the metal.

Surface treatment: metal, concrete, bricks, interior, exterior, base: silicone, heat resistance, application: for radiators, application: roller, brush, sprayer, minimum consumption (g/sq.m.).м): 180, maximum consumption (g/km).

Paints for stoves and fireplaces

Continental paint for stoves and fireplaces ALFAVIT heat resistant white 1,3 KG (6) Series Alpha, 6 pcs.

Heat-resistant anticorrosive enamel Elcon

NEOMID Interior paint 3 in 1 fire retardant matte

See also  How to paint a heating battery in an apartment

Silicate paint Alfavit for stoves and fireplaces matte white 3 kg

Paint for stoves and fireplaces Mitsar white (0.9 kg)

Heat-resistant Vixen Enamel, black, 520 ml

Paint for stoves and fireplaces Mitsar red-brown (0.9 kg)

Elcon Heat Resistant Enamel Max Therm 1000°C Black 520 ml

Elcon’s silicone enamel (KO) heat-resistant Max Therm up to 500°C

Heat-resistant enamel certa terracotta up to 600°C 0,8 kg

Acrylic paint Palizh GOLexpert for stoves and fireplaces fire retardant matte white 1 kg

Paint Emelya for stoves and fireplaces 149 items.149 products

Environmentally friendly heat-resistant paint for long-term protection of mineral surfaces exposed to high temperatures, typical for stoves and fireplaces.Does not contain organic solvents. Not intended for tinting. At heat.

Heat-resistant corrosion-resistant all-weather matt black enamel CERTA for items made of metal, stone, concrete, reinforcement, reinforced concrete, exposed to extremely high and low temperatures (from.70°C up to 1200°C)

Paint for stoves and fireplaces heat resistant “ALFAVIT” white 3 KG (1) Series Alpha

Fast-drying weather-resistant refractory enamel spray for fireplaces and chimneys up to 650 ° C. Paint for fireplaces is designed specifically for painting the outer metal parts of fireplaces, stoves, ovens and grills, stove pipes, grills, boilers and boilers. Paint for stoves, ovens, stoves and grills.

Description paint for stoves and fireplaces Alpha 1,3 kg The paint is designed for painting stoves, fireplaces, chimneys, on concrete, stone, brick, plaster, putty, except metal surfaces. For internal works, withstands heat up to 400°C.

Designed for protective anti-corrosive painting of metal equipment of oil, gas, and steam pipelines, incinerators, as well as for painting of car exhaust systems, engine parts and other metal surfaces, operated in conditions.

Heat-resistant black paint 600 °С aerosol 520ml.Designed for painting metal products exposed to heat up to 600 ° C, such as: car components (silencer, engine, brake drums, radiator). Domestic heating components (furnace.

Environmentally friendly heat resistant paint designed to maintain the aesthetic appearance of stoves and fireplaces and to maximize the life of surfaces exposed to high temperatures. Contains no organic solvents. Does not change when heated.

Environmentally friendly heat-resistant paint designed to maintain the aesthetic appearance of stoves and fireplaces and maximize the life of surfaces exposed to high temperatures. Contains no organic solvents. Does not fade when heated.

BEHRINGER XR12 digital mixer with 12 inputs for iPad / Android tablets suitable for studio and live performances. 4 programmable Midas-designed microphone preamps. Built-in 3-mode Wi-Fi router for direct operation

Behringer Xenyx X1622USB A compact, low-noise, premium mixing console (4 mono inputs with independent compressors, 4 stereo inputs, 2 AUX-bus, effects processor, integrated USB-interface, integrated switching power supply) Behringer XENYX X1622USB. compact.

Features Behringer SD8: 8 Midas fully-programmable mic preamps for the best sound quality. 8 analog, servo-balanced XLR outputs. AES50 network ports supporting Klark Teknik’s SuperMAC. 2-port ULTRANET distribution hub for powered connect.

Behringer DIGITAL MIXER X32 Digital Mixer Console. 32 balanced mono inputs with preamplifiers (XLR), 6 additional. Inputs (TRS), stereo input (RCA), 6 subgroups, 6-band EQ, effects processor, dyn. processing, 16 analog. outputs (XLR), stereo output (RCA), digital

Features Behringer X2222USB: 8 XENYX microphone preamplifier with phantom power. Compressors: 8. 3-band equalizer. Effects processor with 16 editable presets (including Reverb, Chorus, Flanger, Delay, Pitch Shifter, Multi-effects and Long.

Behringer X32 RACK. Digital mixer, 16 inputs, 8 x 25-bus, 8 FX slots

Mixer, 18 channels, USB/audio interface, mixer preamp and compressor, 9 EQ, Multi FX

Heat-resistant coating, which forms a coating on silicate base, intended for long-term protection of mineral surfaces, exposed to high temperatures, typical for stoves and fireplaces. Coating is used for decorative finishing of stoves, fireplaces.

Heat-resistant anticorrosive enamel Elcon silver-gray up to 700°C (0,4 kg) is intended for protective painting of furnaces, boilers, metal equipment, brake calipers, gas, oil pipelines and pipelines operating at temperatures from.60°C up to 700.

Environmentally friendly heat resistant paint, designed for long term protection of mineral surfaces. Exposure to high temperatures, typical for stoves and fireplaces. Does not contain organic solvents

Low noise premium mixing console, 4 mono inputs with compressors, 2 stereo inputs, 2 AUX-bus, effects processor Klark Teknik, USB-intakes for connecting 2-channel digital receiver wireless microphone radio systems and connect to your computer, ins.

The new, compact and low-noise mixing console BEHRINGER X1204USB premium musicians presented fairly well-known Austrian company Behringer, which has established itself and became known for its modern and innovative approach to o.

Behringer XR16. Digital rack mixer 16 channels

Water-borne acrylic heat-resistant paint. Designed for painting plastered, masonry and brick ovens. Withstands heat up to 400°C

Manufacturer: BEHRINGER Type of mixer: digital

Low-noise premium mixing console, 8 mono inputs with compressors, 4 stereo inputs, 3 AUX buses, 2 subgroups, effects processor, USB interface, built-in power supply

Digital mixing console. 16 programmable MIDAS preamps, 17 motorized faders, LCD channel display, FireWire/USB audio interface and remote iPad/iPhone control

Behringer X32 RACK 40-channel, 25-bus digital mixer 3U

Premium low-noise mixing console, 4 mono inputs with compressors, 4 stereo inputs, 6 mic preamps, 2 AUX buses, effects processor, EQ in master section, USB interface, built-in power supply

DJ mixer with built-in USB interface (7 input channels, 45 mm optical VCA crossfader, 3-band EQ). Additional Balance./unbalance. 1 zone woofer output

Digital rack-mixer, 12 channels with insert-ams that supports iPad or Android-pads, 4 programmable Midas preamplifiers, 8 line inputs, built-in Wi-Fi module and USB stereo recorder

Universal premium low-noise mixing console (8 mono inputs with independent compressors, 4 stereo inputs, 10 mic preamps, 4 AUX buses, 4 subgroups, effects processor, integrated USB interface, built-in switching power supply)

Type. 18-channel premium mixing console with built-in effects processor and USB port, 18 channels, 3 aux bus, Inputs. 6 mic (mono) 4 line (stereo), low-noise preamplifier xenyx.

Behringer X1204USB Compact, low-noise, premium mixing console (4 mono inputs with independent compressors, 2 stereo inputs, 2 AUX-bus, effects processor, integrated USB-interface, integrated switching power supply)

Behringer X1204USB. Mixer,4 mono, 2 stereo, 2 AUX-bus, effects processor, integrated USB

Low noise mixing console, 6 mono inputs with compressors, 4 stereo inputs, 6 mic preamp with phantom power, 3 AUX-bus, 2 subgroups, effects processor Klark Teknik, 3D processor, 9-band graphic equalizer, surround sound effect, bump function.

Heat resistant paint for stoves and fireplaces. 412 items.412 products

Elcon heat-resistant enamel is designed for protective painting of furnaces, boilers, metal equipment, gas pipelines, oil pipelines and pipelines operated at temperatures above.20°C.60°C to 600°C. General characteristics Operating temperature range: from ?60°C to 600.

Processing material: metal, concrete, plastered surface, brick, gloss grade: matte, for interior works, for exterior works, number of components: single-component, coating type: covering, base: silicone, primer enamel, heat resistance, frost resistance.

Elcon Max Therm Black corrosion protection enamel with a temperature resistance up to 1000°C (520 ml aerosol) for protective and decorative painting:. Heating furnaces, boilers and fireplaces;- Heating radiators and pipes. chimneys and vents;- smokehouses and grills;-automotive.

Type: acrylic, processing material: plastered surface, for interior work, number of components: single-component, minimum flow (g / sq.m.).м): 150, thinner: water

Heat-resistant Zerta enamel for painting grills, stoves, fireplaces and metal structures. Color copper. Temperature resistance up to 750 ° C

white, matte, 1 kg.,does not change color when heated consumption: 180-230 g/m²

Treatment material: metal, gloss grade: matte, base: organosilicon (KO), heat resistance, application: roller, brush, sprayer, minimum flow rate (kv.m/kg): 8

Elcon Max Therm grey corrosion preventive enamel with a temperature resistance up to 400°C (aerosol 520 ml) for protective and decorative painting:. Heating furnaces, boilers and fireplaces;. Heating radiators and pipes. chimneys and vents. smokehouses and grills.

Anticorrosive heat-resistant paint designed for protective anti-corrosive painting of metal equipment operating in conditions of high humidity and temperature, furnaces for saunas, baths, chimneys

Heat-resistant coating, forming a coating on silicate base, designed for long term protection of mineral surfaces, exposed to high temperatures, typical for stoves and fireplaces. The wrap is used for decorative finishing of stoves, fireplaces.

/ECOTERRA/ 1kg, color: red-brown, does not change color when heated consumption: 180-230 g / sqm

Elcon Max Therm red-brown corrosion-resistant enamel with a temperature resistance up to 700 ° C (520 ml aerosol) is designed for protective and decorative painting:. Heating furnaces, boilers and fireplaces;. Heating radiators and pipes. chimneys and air ducts;- smokehouses and braziers;-auto.

Processing material: metal, for internal works, for external works

Heat resistant matte Zerta enamel for painting grills, stoves, fireplaces and metal structures. Color black. Temperature resistance up to 1000 degrees

bases: silicone, processing material: metal, for interior work, exterior, heat resistance, minimum flow (ml / sqm).м): 520

Heat-resistant enamel Luxens is designed for painting metal surfaces, which operate in conditions of high humidity and high temperatures. Suitable for the treatment of elements of water-heating, boiler and furnace equipment, exhaust vent.

Elcon Max Therm” heat-resistant corrosion-resistant enamel, grey to 400°C (520 ml aerosol), designed for protective and decorative painting of. Heating stoves, boilers and fireplaces. Heating radiators and pipes. Chimneys and air ducts;- Smokehouses and grills;- Automobile to.

Features: High-quality organosilicon enamel BOSNY used for painting stoves, boilers, ovens, exhaust pipes, mufflers, engines, and other high-temperature equipment; Weatherproof; Moistureproof; Does not burn out or yellow; Resistant to organic.

Heat-resistant Zerta enamel for painting grills, stoves, fireplaces and metal structures. Color orange. Temperature resistance up to 400 ° C

Anticorrosive, heat-resistant paint designed for protection of metal equipment operating in conditions of high humidity and temperature, stoves for saunas, baths, chimneys

Application type: non-silicate, stone, concrete, plastered surfaces, bricks, interior work, exterior work, gloss grade: matte

Type: acrylic, volume: 5 l, weight: 5 kg, scope: interior and exterior work, method of application: cold application, composition: one-component, consumption: 1.5 kg/m2, material handling: plasterboard, cement plaster, concrete

Anticorrosive heat-resistant paint designed for protective anti-corrosive painting of metal equipment operating in conditions of high humidity and temperature, stoves for saunas, baths, chimneys

Zerta” HS series heat-resistant enamel for painting of grills, stoves, fireplaces and metal structures. Color: metallic anthracite. dilution 1:1. Temperature resistance up to 1000 °С

High-quality organosilicon enamel designed for painting metal products exposed to heat up to 600°C, such as: components of car exhaust systems, parts of pipelines and steam lines, parts of water heating, boiler.

Elcon Max Therm anthracite heat-resistant anticorrosive enamel up to 600°C (520 ml aerosol) is intended for protective and decorative painting:. Heating stoves, boilers and fireplaces;- Heating radiators and pipes. Chimneys and air ducts;- Smoke chimneys and grills;- Automobiles.

Product Type: Enamel; Brand: Certa; Type: Organosilicon; Purpose: For facade, For radiators, For stoves, For cars; Weight/Volume, kg/l: 0,520; Color: Black; Gloss: Matte; Surface Type: Concrete, Stone, Metal; Type of Work: Interior, Exterior; Type of Work.

Gloss grade: matte, for interior work, for exterior work, heat resistant

Heat-resistant Hansa paint for painting: stoves, fireplaces, chimneys, grills, withstands temperatures up to 800°C Gloss: matt Specific thickness: ±1,44 gr./cm³ Amount of pure substance: ±31% Theoretical coverage area, m²/kg, 22 µm 11.5м².

Zerta heat-resistant enamel for painting grills, stoves, fireplaces and metal structures. Color terracotta. Temperature resistance up to 600°C

Base type: acrylic, material: metal, wood, plastic, application area: for radiators, for interior work, for exterior work, heat resistance

Surface finish: silicone, base material: metal, concrete, bricks, area of application: for radiators, for interior works, exterior works, type of coating: covering, for children’s room, temperature resistant, frost resistant

See also  How to paint a jacket in a washing machine

Dimensions: 21 cm x 18 cm.1 cm Finnish heat-resistant glass for the following stoves: Harvia M2 Wood-burning stove Harvia M3 Wood-burning stove Harvia M3 SL Wood-burning stove Harvia 20 Pro Wood-burning stove Harvia 20 Boiler Wood-burning stove Harvia 20 ES Pro, 20 l tank Wood-burning stove Harvia 20 ES Pro S.

High-quality heat-resistant paint for grills and stoves DECORIX is intended for painting metal surfaces, exposed to heating up to 800 ° C. Suitable for painting grills, stoves in baths and saunas, fireplaces, indoor stoves, roasters.

Heat-resistant corrosion resistant enamel Elcon red-brown to 700 ° C (0.8 kg) is designed for protective painting of stoves, boilers, metal equipment, gas, oil pipelines and pipelines, brake calipers operated at temperatures from.60°C up to 700.

Basis type: silicone-organic, for external works, type of coating: opaque, temperature resistant

Acrylic base type: silicone, processing material: metal, application area: for humid spaces, for radiators, for sanitary ware, for baths, for interior works, for exterior works, temperature resistant

Base type: acrylic, base material: metal, interior work, exterior work, temperature resistance, frost resistance. UV protection

High-quality organosilicon enamel designed for painting metal products exposed to heat up to 800 ° C. braziers, grills, stoves, fireplaces. Can be used for painting boilers, boilers, radiators. Lead- and mercury-free.

Type: sealant, application: interior work, material: stone, packaging type: bottle, volume: 260 ml, base: silicate

Designated for corrosion-resistant protective painting of metal equipment of oil, gas and steam pipelines, furnaces for burning waste, as well as for painting of car exhaust systems, engine parts and other metal surfaces, operated in conditions of.

Zerta HS series heat-resistant enamel for painting braziers, stoves, fireplaces and metal structures. Color anthracite metallic. dilution 1:1. Temperature resistance up to 1000 °C

High-quality organosilicon enamel BOSNY used for painting stoves, boilers, ovens, exhaust pipes, mufflers, engines, and other high-temperature equipment; Weather-resistant; Moisture-resistant; No burning out or yellowing; Resistant to organic rays.

Processing material: stone, metal, concrete, plastered surface, brick, glossiness: matte, for internal works, for external works, number of components: one-component, coating type: covering, basis: silicone, primer-enamel, heat-resistant.

Heat-resistant enamel Zerta is a matte decorative and corrosion-resistant coating for forging and metal structures, which are exposed to extreme temperatures from.70 ° C to 750 ° C.Thermal enamel “Zerta” is painted metal stoves in the house and baths, fireplaces, and d.

Processing material: metal, concrete, plastered surface, brick, for interior works, for exterior works, number of components: single-component, type of coating: hiding, base: silicone, heat resistance, application area: for radiators, for fa.

paint, stoves, fireplaces, alpha

Anticorrosive heat-resistant paint designed for protective anti-corrosive painting of metal equipment operating in conditions of high humidity and temperature, furnaces for saunas, baths, chimneys

Zerta heat-resistant enamel for painting grills, stoves, fireplaces and metal structures. Color terracotta. Temperature resistance up to 500°C

High-quality silicate sealant for repairs and filling cracks and joints in fireplaces, stoves, furnaces and chimneys. An admixture of glass fibers creates a strong smoke and gas tight layer, resistant to shrinkage and expansion advantages:. Excellent.

Basis type: silicone, processing material: metal, for interior work, exterior work, temperature resistance

Anticorrosive heat-resistant enamel CERTA up to 650°C, intended for protective and decorative painting of surfaces operating in conditions of high temperature (up to 650°C).Product used to paint various equipment, exhaust systems, calipers.

Processing material: metal, concrete, plastered surface, brick, for internal works, for external works, number of components: single-component, type of coating: opaque, base: silicone, primer-enamel, temperature-resistant, cold-resistant. UV protection.

Finish type: silicone, base material: metal, gloss grade: matte, for interior works, exterior works, high temperature resistance

ETUD heat-resistant enamel Special heat-resistant enamel, resistant to high temperature 600. Prolonged heating (more than 20-30 minutes), depending on the color of heat-resistant enamel varies from 300 to 400. Due to its unique properties the enamel is heat-resistant.

Type of base: silicone, processing material: metal, area of application: for humid spaces, for radiators, for sanitary ware, for baths, for internal works, for external works, heat resistance

Heat-resistant enamel “Zerta”. It is a decorative and corrosion-resistant matt heat-resistant coating for forging and steel structures, which are exposed to extreme temperatures from.70 ° C to 400 ° C.Thermal enamels are used for painting metal stoves in houses and bathhouses, fireplaces and chimneys.

The anticorrosive, heat-resistant paint designed for protective anti-corrosive painting of metal equipment operating in conditions of high humidity and temperature, furnaces for saunas, baths, chimneys

N600, 265 g., Acrylic, heat resistant, color: black, for exterior and interior work

Heat-resistant cement-based adhesive with reinforcing fibers for tiling stoves and fireplaces. Intended for gluing ceramic, porcelain stoneware, natural and artificial stone facing tiles to brick surfaces of stoves, fireplaces and concrete os.

Heat Resistant Patina Elcon Gold 0.08 kg 00-00002929

Features: High-quality organosilicon enamel BOSNY used for painting stoves, boilers, ovens, exhaust pipes, mufflers, engines, and other high-temperature equipment; Weatherproof; Moisture-resistant; Does not burn out or yellow; Resistant to hp.

Product Type: Enamel; Brand: Certa; Type: Organosilicon; Purpose: For Radiators, For Facade, For Cars, For Ovens,; Weight/Volume, kg/l: 0,520; Color: Black; Gloss: Matte; Surface Type: Stone, Concrete, Metal; Type of Work: Interior, Exterior; Type of Work.

Material treatment: metal, for interior work, for exterior work, heat-resistant, UV protection

Features: High-quality organosilicon enamel BOSNY used for painting stoves, boilers, ovens, exhaust pipes, mufflers, engines, and other high-temperature equipment; Weatherproof; Moistureproof; Does not burn out and does not yellow; Resistant to organic.

Anticorrosive heat-resistant paint designed for protective anti-corrosive painting of metal equipment operating in conditions of high humidity and temperature, furnaces for saunas, baths, chimneys

DECORIX heat-resistant water-repellent varnish for protection and decoration of surfaces heated up to 250°C and domestic use, construction, renovation. For brick, wood, metal, ceramics in saunas, saunas, stoves, etc

Heat resistant paint for the treatment of all units and parts exposed to high temperatures: engines, exhaust system, etc. Adheres well to all metallic surfaces

Unit: jar manufacturer: Chromos Luminosity Silicone modified product is used for the protection and decoration of elements that are exposed to high temperatures

Heat-resistant enamel Elcon Black 1200 degrees 0.4kg 00-00004052

For anti-corrosion protection of steel (in t.ч. carbon, stainless steel and galvanized) and paint metals of aluminium, magnesium, titanium alloys, working at temperatures from.60°C to 210°C

Heat-resistant varnish CERTA “7 in 1” for protective treatment of metal, wood, stone, ceramics, brick, concrete, plaster against mold, mildew, fungus, moisture. Protects forged metal products from corrosion

paint, stoves, fireplaces, alpha

Certa Patina heat resistant patina for decorating metalwork. Scuff and antique effect paint, resistant to 700°C. Metallic and mother-of-pearl patina for fireplaces, grills and accessories

Heat-resistant Zerta enamel for painting grills, stoves, fireplaces and metal structures. Color terracotta. Heat resistance up to 600 ° C

The compound is used for laying of all kinds of high-marble bricks, including refractory ones, when arranging furnaces. fireplaces, gas ducts, pipes, vaults, thermal stressed areas of firing, drying and loafing ovens, furnaces and other objects with temperature exposure.

paint for radiators (enamel for radiators), heating batteries and metal pipes, pipes of cast iron, aluminum, copper and non-ferrous metals, with excellent heat resistance; for internal works; washable heat resistant coating, weight:0.75 л. gloss:glossy. color:white.

DECORIX high quality heat-resistant enamel designed for painting surfaces exposed to heating up to 300 degrees Celsius, as well as for home use, decorative and decorative works, construction and repair

Anticorrosive heat-resistant paint designed for protective anti-corrosive painting of metal equipment operating in conditions of high humidity and temperature, furnaces for saunas, baths, chimneys

Designated for protective painting of furnaces, heating pipes and other surfaces. Temperature resistance: from.60°C up to 1000°C

Zerta heat-resistant enamel for painting grills, stoves, fireplaces and metal structures. Color White. Temperature-resistance up to 400 °С

Heat-resistant paints for stoves and fireplaces

Heat-resistant enamel HAMMER KO 800 ° C, silver, 520 ml, 1 pc.

Heat-resistant enamel Elcon (up to 600 degrees), gray-silver, 0.8 kg

Acrylic paint Krafor for stoves and fireplaces series Alpha semi-matt

Putty for stoves and fireplaces (silicate enamel, heat resistant) Alpha 3 kg

Elcon Thermal Resistant Enamel Max Therm 400°C Red 520ml

Elcon Colorfast Enamel Max Therm 700°C Graphite 520ml

Organosilicon Enamel (KO) DALI heat resistant silver 0.5 kg

Elcon Colorless Thermal Varnish for Stoves and Fireplaces up to 250 °C, Aerosol

Monarka Heat Resistant Airpaint Silver

Elcon Colorless Thermal Enamel for Stoves and Fireplaces up to 250 °C, Aerosol

Temperature resistant spray paint KIM-TEC 54339

ECOTERRA Stove Paint, white 1kg., article.EK000117065

Heat-resistant copper enamel Certa up to 750 °C 0,8 kg

Heat resistant paint (0,8 kg can) Black ELCON

Acrylic paint Vtema for stoves and fireplaces white 1.3 kg

ECOTERRA stove paint, 1kg, color: red-brown, art.EK000117773

Alfavit Silicate paint for stoves and fireplaces matt white 3 kg

Enamel Elcon Heat-resistant Enamel Max Therm 600°C, Anthracite, 520ml

Enamel Elcon Colorfast Enamel Max Therm 1200°C Black 520 ml

Heat-resistant paint (0,8 kg can) Black CERTA

CERTA Enamel 1200°C Black, 520 ml

Heat-resistant certa enamel orange up to 400°C 0.8 kg

Heat-resistant enamel certa terracotta up to 600 °C 520 ml

Elcon Colorfast Max Therm 500 °C Red-Brown Enamel 520ml

Glass for Harvia M2,M3, 20 Sl, Legend 240, 26 Pro

Heat resistant paint Hansa RAL 820-2 (996) 400 ml

Heat resistant Hi-Temp paint Hi-Temp up to 205°C metallic

Rust-Oleum heat resistant enamel up to 1093°C matte

Heat resistant paint (can 0,8 kg) Black CERTA

REF acrylic enamel 600°C heat-resistant for exterior and interior work

Heat-resistant enamel Certa HS Terracotta metallic up to 1000°C 0,8 kg

Adhesive for tiling stoves and fireplaces PLITONIT SuperKamin TermoKlei BT (heat-resistant) 5 kg

Heat-resistant paint Elcon, red-brown, 0,8 kg, up to 700 degrees

Heat-resistant Zerta Enamel, w/w, up to 650°C, 0.8 kg, red-brown 2442265

BOSNY Paint High-temperature resistant Hi-Temp up to 650°C Flat black 400 ml

PROFMASTER SILICATE SEALANT FOR STOVES AND FIREPLACES 260 ML BLACK MASTERTEKS

Heat resistant Enamel Elcon

Heat-resistant paint (0,8 kg can) Silver ELCON

Heat-resistant Zerta enamel, w/o, up to 750 °C, 0.8 kg, black 2442271

Heat-resistant ETUD Airspray Automotive Enamel

Enamel NPP Spectrum Heat resistant 650 ° C silver 520 ml

DECORIX aerosol paint for grills and stoves heat-resistant 800 ° C, matte, graphite black Property : Graphite black RAL 9011 Decorix 0145-9011 DX

Heat-resistant enamel certe terracotta up to 500 ° C 520 ml

Silicate sealant MasterTeks ProfiMaster for stoves and fireplaces black 260ml

Enamel SPE Spectrum Thermal 400 ° C red 520 ml

RUNWAY heat resistant paint, silver

Heat resistant anti-corrosive paint Elcon up to 400C, red RAL3002, 0,8 kg.

About the author

| Denial of responsibility | Contacts |RSS