Split codes for a universal remote control

Split codes for a universal remote control

Often, it happens that you have lost or broke a remote control for air conditioning.

We must go to the store and buy a universal remote control for air conditioning.

After the purchase, you joyfully turn on the remote control and the UPS. Nothing happens, the air conditioner does not respond to commands from the remote control. Certainly. Its (remote control) must first be programmed! The universal remote control is stored tables of commands of teams of different models and manufacturers of air conditioners.

Therefore, before use, you need to activate (select) the desired set of commands that corresponds to your air conditioner. How to do this will be described below. On the example of the remote control “KT-9018E”.

So the instructions for the universal remote control KT-9018E:

Install batteries in the remote control. Observing polarity.

Find the code of your device in the code table:

There are many codes for each brand air conditioner. First, try the first code in the group, if after that the remote control does not control the device or does not perform all the functions try the next one, and so on until you find the code in which the remote control will control your air conditioning. For example, for the AUCA air conditioner, you enter code 0288 if the air conditioner does not respond, enter the code 0229 and TD.

Press the Select button and the code on the remote control will blink once. Enter the 4th digit code you need. For example 0288. Click the button 0, on the display it will stop flashing the remaining three digits will blink, then 2, the remaining two digits will blink, then 8, one digit flashes and finally the last number 8. All four digits of the 4th precise code stopped blinking the code entered.

The remote control is programmed, and the digital buttons of the remote control now work as usual and perform original functions. The remote control is ready for work, you can manage your air conditioning.

After your air conditioner is turned on, make sure the remote control controls the air conditioner normally.

If you do not know which brand your air conditioner, or the brand of your air conditioner is not in the list of codes, try to find the desired code as follows:

Direct the remote control to your air conditioning so that it can take the remote control commands. Press and hold the Select button for 5 seconds and release. The remote control moved into the automatic search mode, he continuously sends commands, sorting through all the available codes, starting with 0001. At the same time, the codes on the remote control display flash and increase. When the device accepts the command from the remote control, a characteristic signal (BIP) will be heard, which issues air conditioning, performing a command sent from the remote control. At this moment, press any remote control button to stop the codes scan process and check if the remote control controls your air conditioner

If the remote control does not perform all the functions, start the process of searching for the code again, and so on until you find the code in which the remote control will control your air conditioner correctly.

In winter. Accordingly, you can use the Intelligent Heat function click it and the air conditioner will immediately start heating the room. In both modes, the air conditioner will begin to heat or cool the room to a comfortable temperature, automatically control the force of blowing and the position of the damper, at the same time you can manually set the required temperature using the “”-“-” two functions are especially convenient for children and elderly persons.

Press the “Time” button of the clock on the display freezes

Press the “Time” button again to fix the value.

You can program the timer of turning on your air conditioner only when it is turned off.

Click on the remote control “TMR” on the display of the timer signal and the clock blink

Using the Time/Code “or” buttons, “set the desired time for turning on the air conditioner.

Time blurs and stop flashing after 5 sections. The display displays the current time and time of turning on the timer.

You can program the shutdown timer for your air conditioner only when it is turned on.

Click on the remote control button “TMR on the display of the timer signal and the clock blink.

Using the Time/Code “or” buttons, “set the desired shutdown time of the eoncioner.

Time blurs and stop flashing after 5 sections. The display displays the current time and time of turning on the shutdown timer. Installation completed.

If you press the Timer On/OFF button while the time of installation of the timer is blinking, the timer will be removed.

After installing the timer, you need to place the remote control in this way. So that the signal from it can be accepted by the device, otherwise the air conditioner will not work at the appointed time.

After installing the timer, you can view the installations by pressing the Timer on/OFF button, while the timer time will appear on the screen and blink, after 5 times at the time of time the timer will be displayed the current time.

Air conditioners Sale Installation Service Samara region. Samara, Togliatti, Syzran.

The principle of operation of the device

A universal air conditioning management device, the appearance does not differ from the standard remote control. The case is made of plastic, LCD display is usually located in the upper part of the remote control. Buttons with standard functions of split systems. Signed in English. Such remote controls are produced by a variety of shapes, colors and modifications.

A feature of universal remotes is a large number of pre.Installed frequencies of infrared beam, each of which corresponds to a certain model of air conditioning. To find out if your chosen device has your split system of the split system. You can, having studied the instructions for the product. The most inexpensive remote control for air conditioners includes about 1000 codes to the same number of climatic equipment from various manufacturers. A good device of the DU, can work with more than 4 thousand. Models of air conditioners.

Important! According to the manufacturer, Qunda KT 9018 supports work with almost all models of Chinese, Korean and Japanese production, in manual and automatic mode.

Settings of configuration of any air conditioner

P.S. If in the room the current temperature corresponds to the configured, then the air conditioner will not be cold (or warm depending on the regime).

Types of remote control devices

PDU is classified into two types according to the principle of operation and the method of connection:

Consider the main features of devices of each type.

Infrared models

In domestic air cooling systems, infrared model of PDU is most often used. It is a small device with buttons and has infrared emitters on the sides, transmitting the signal to the photo receiver of the split system.

Outwardly, such devices differ little from each other. Original consoles for air conditioners can be equipped with the following functions:

The main disadvantages of infrared switches are in a small radius of action (about 8 m) and that a small device can easily be lost in the apartment.

Wall remote control

Wall switches for cooling systems are convenient for use in large rooms. Unlike infrared models, the radius of their actions is unlimited, since the remote control is connected to the device through the system of wires.

Using a wall switch, you can change the operating mode of the air conditioner for an entire office from one remote control.

Wall dews are usually not installed in residential buildings, since they cannot be moved around the apartment, and for its installation it will be necessary to lay a separate cable.

Split codes for a universal remote control

The universal specialized KT-E08 remote control is designed to manage air conditioners with 6,000 codes, suitable for many world brands; old and new models. The remote control has a liquid crystal display, a watch with a timer of turning on and off, temperature display in the room, etc.D.

Insert the two AAA batteries (R03) according to the polarity indicated on the battery compartment, and select one of the following settings:

Find codes in the codes table in which codes of models of various brands are grouped. Select the name of your brand and enter the first four.Digit number of the presented codes in this group. If the first code does not fit, try the next one, and make the codes from the table until you can control your air conditioner. For example, for the Samsung brand, try the “0188” code, if it did not fit, then “0189”, and so on.

Click once on the selection button for the Select programming mode on the display will be displayed. In turn, enter four digits of the code you have chosen. For example: “0188”, click “0”, “0” will stop flashing, click “1”, “1” will stop flashing, click “8”, “8” to flash, click the last number “8”, “8” 8 blinking, entering code is over and setting is completed.

Direct the remote control towards the air conditioner, then press the One Key button, and then check the operability of the remote control. If all the functions work, the setting was successful, if not, try to enter the next code from this group.

If the air conditioner is unknown, or if the desired brand is not in the codes table, follow the following actions:

Put the remote control to the air conditioner, then you need to press and hold the Select mode selection button for five seconds, and then release. Thus, the automatic search mode is activated. The remote control will begin to consistently issue signals with various encodes, and numbers will be displayed on the display and gradually increase. As soon as the air conditioner reacts to the signal, press any button to stop the search and confirm the found signal.

Put the console on the air conditioner and press the One Key button again. If the remote control controls the air conditioner, the setting is completed, if not, continue the auto.Puns.

Using the One Key button

If you need to turn on the air conditioner, direct the remote control at it and press the One Key button. The remote control itself determines the time of year by current temperature in the room. In summer, the temperature will be set 26 ° C. In winter, a temperature of 20 ° C will be installed. If the set temperature does not suit, use the TEMP or TEMP- buttons to install the required temperature.

Click the Clock button, the clock will blink.

Click the Time or Time- buttons to set the current time.

Click the Clock button again, the clock will stop flashing, the installation of time is completed. If you do not press the Clock button, in five seconds the time will be set automatically.

Switch

Regardless of whether the air conditioner is turned on or not, you can configure the switching timer and off.

Click the TM ON button, a clock will appear on the display and flashing time. To set the desired time, you need to press the Time, or Time- button, and after five seconds, the switching time will be confirmed.

Press the One Key button, then “TM OFF”, a clock will appear on the display and flashing time. Click the Time or Time- button, set the right time, after five seconds, the shutdown time will be confirmed.

You can set the time in the range 00-24 hours. To turn off the timer twice in a row, press the “TM ON” or “TM OFF” buttons.

After entering the time of the timer, the remote control should be in the air conditioner control zone, and is directed in its direction, otherwise the installation of time will not act. To display the temperature in the room, click the “Room Temp” button and, after about five seconds, the remote control will return to the previous mode. Thus, this remote control can be used as a thermometer to control the temperature in the room.

If the remote control is not used for a long time, be sure to remove the batteries to avoid the leakage of the electrolyte that can damage the device. If the display looks dim, it is necessary to replace both batteries with new. After installing new nutrition elements, it is not necessary to configure the code again. Before any settings of the remote control, check if there are interference between the adjustable remote control and air conditioning. Actions will be performed only if the air conditioner receives a signal from the remote control.

Split codes for a universal remote control

How to include air conditioning in heating mode?

Remote control. The appointment of buttons

Remote control display

If the batteries are discharged, such an icon will appear on the display of the remote control if such

Icon, replace batteries. For remote control, two batteries 1.5V AAA are needed.

Remote control

If you do not use the remote control for a long time, remove the batteries from the remote control

The main type of work is determined by the mode of operation, which can be selected by clicking on the Mode button (mode).

With each click of the Mode button (mode), the mode will change in this order Auto (car), Cool (cooling), dry (drying), fan (fan) and heat (heating).

Auto (auto) in automatic mode will automatically set a temperature of 24 ° C. The fan speed is set automatically, depending on the temperature in the room.

Cool (cooling). In the Cool mode (cooling), the air conditioner will cool your room. You must not forget to set the temperature and speed of the fan rotation.

DRY (DRAIDED AIRS) Air conditioning in Dry (drying) mode acts as a drainage by removing moisture from the air of the room. Dry mode makes the air fresh in wet climate.

FAN (fan) can be selected for ventilation of the room. FAN mode (fan) will be useful for refreshing stagnant air indoors.

Heat (heating) air conditioning can heat your room.

After turning on the heating, the air conditioner begins to supply warm air after 5 ~ 7 minutes. A delay is needed to prevent the supply of cold air while the air conditioner warms up.

Since the air conditioner heats the room by obtaining thermal energy from the outer (street) air, its heating ability can decrease if the outer air temperature is below 0 ° C.

Air flow adjustment

How to regulate a vertical air flow?

Press the Air Swing button on the remote control.

The indicator of a constant change in the direction of the air flow will turn on, and the guides will begin to constantly turn up and down, ensuring air circulation.

Again, press the Air Swing button on the remote control (the blind position) to fix the direction of the air flow in the current direction.

Adjusting horizontal air flow

Move the pin lever of the guides to the left or right to

Fix the direction of air flow in the constant constant

The Turbo function is used to quickly and efficient cooling of the room.

Press the Turbo button (turbo) on the remote control in the Cool mode (cooling).

The TURBO function indicator (turbo) will appear on the display of the remote control. Air conditioning will work in the Turbo (turbo) function for 30 minutes. To turn off the function, press the Turbo button (turbo) again.

The Turbo (turbo) function acts only in Cool mode (cooling).

By pressing the Mode button (mode), when the Turbo (turbo) function acts, you will cancel this function.

Set the temperature/speed of the fan when this function is impossible.

To provide a comfortable dream, the air conditioner provides a comfortable sleep function. This mode in turn consists of three modes: Fall asleep (falling asleep), Sound Sleep (Strong

Used in cooling/heating mode

Press the / Good Sleep / Remote control button.

Press the Time Up button (time) or Time Down (time back) to set the time.

Press the SET button (install) to activate the function.

Smart review. Smart Review

The most original reviews from the buyer. Photo and video.

How to set up a universal control panel to air conditioning

As a rule, when loss or breakdown of the control panel, it is impossible to enable the air conditioner. It is not always possible to buy a new remote control for a specific model of air conditioning.

Therefore, buying a universal remote control is the only way out. Using such a remote control can be controlled by any air conditioning. To do this, you need to configure the remote control for your air conditioning model.

The principle of setting up all the remote controls is the same and consists in the water of the desired code in memory of the remote control. As a rule, an instruction is attached to the remote control, in which there is a table of codes for different models of air conditioners. There are two modes to configure the remote control. This is an automatic and manual mode.

Automatic mode can be used if you do not know what air conditioning you have or in the codes table there is not your air conditioner model. To configure in the search mode, you need to take the remote control in the hand and send it to the air conditioner. Find the “Select” button on the remote control, click and hold it for 5 seconds, then release.

The remote control will automatically send commands to the air conditioner, and sort out all the available codes. At the same time, the codes will flash and change on the display of the remote control. As soon as the correct code appears, you will hear the sound signal from your device and the air conditioner will turn on. At this moment, you must click on any button on the remote control, the codes scan process will be stopped.

Check the air conditioner with this code. If the commands are not performed correctly or some functions do not work, run the car search for codes again until you find the code in which your air conditioner will work correctly.

Settings in manual mode take less time. Find the code in the code table for your air conditioning model, there may be several. Click the “Select” button, while the code on the remote control room should blink once. Using digital buttons, enter the code in memory and press the Enter button, the remote control is programmed.

Check how commands are executed by air conditioning. If the air conditioner is not correct, try to introduce the rest of the codes in turn. You can also sort out the codes using the “TEMP” and “TEMP-” buttons.

After entering the right code, the air conditioning control panel is ready to work. All basic functions will be available to you. From the remote control, you can choose the operating mode of the air conditioner. It is cold, heat, ventilation, automatic mode. You can set the desired temperature, adjust the fan speed and select the air flow direction.

Types of remote control devices

PDU is classified into two types according to the principle of operation and the method of connection:

Consider the main features of devices of each type.

Infrared models

In domestic air cooling systems, infrared model of PDU is most often used. It is a small device with buttons and has infrared emitters on the sides, transmitting the signal to the photo receiver of the split system.

Outwardly, such devices differ little from each other. Original consoles for air conditioners can be equipped with the following functions:

The main disadvantages of infrared switches are in a small radius of action (about 8 m) and that a small device can easily be lost in the apartment.

Wall remote control

Wall switches for cooling systems are convenient for use in large rooms. Unlike infrared models, the radius of their actions is unlimited, since the remote control is connected to the device through the system of wires.

Using a wall switch, you can change the operating mode of the air conditioner for an entire office from one remote control.

Wall dews are usually not installed in residential buildings, since they cannot be moved around the apartment, and for its installation it will be necessary to lay a separate cable.

Setting up a universal control panel

Setting is carried out in two ways:

First. Programming using codes presented in the instructions for each manufacturer there are several codes for different models.

The codes are in this table or in the photo below:

As can be seen in the image, there are codes not only for well.Known brands, but also very exotic, produced throughout the world and in China, in particular. For example, such as Sova, Huamei, Hualing and many others.

To configure this method, you need to press the S (Select) button on the remote control, after which the code of the desired brand of the air conditioner is indicated for each manufacturer, you need to enter the first one from the list, and then check if the commands are correctly performed and all or only part. If the commands are not performed or not correctly, then you need to enter the next code and so until the time the remote control is completely correctly controlled by the air conditioner.

The second method can be applied when the air conditioner brand is unknown, for example, I met air conditioners without any designations initially. Or if this air conditioner is not on the list.

To do this, click on the S button and hold 4 seconds. After that, the air conditioner begins to sort through all the codes in turn starting from the first, when the code coincides, the air conditioner will be heard the characteristic sound made when the air conditioner is turned on, after which you need to click OK and check the performance of all functions. If the commands are not performed or not correct, then you should look for further.

Universal PDU can not only replace the original remote control, but also help in diagnosis, for example, to check the remote control, which the air conditioner does not respond to.