STINOL refrigerator does not turn on the cause of the two -chamber refrigerate

Characteristics and circuit scheme “Stinol 106

Stinol brand refrigerators are popular with consumers due to high quality and good price. In addition, the cases of such refrigerators are covered with anti.corrosion solutions. And the manufacturing company itself belonged to the international brand of household appliances Indesit. Despite the fact that Stinol’s refrigerators are no longer produced, they are still used in everyday life, but the time and long.term use of even such reliable technology leads to breakdowns. This article will try to answer the question: is it possible to repair the Stinol refrigerator with your own hands?

Checking and replacing a thermostat in the refrigerators “Stinol-101/103″

STINOL brand refrigerators have become widely used in experience in the operation of such refrigerators shows that after 5-7 years, a temperature controller (or thermostat) is out of order. The most common reason for this is the violation of the tightness of the bellows. thermal.sensitive element in the regulator. The reason is that the resource of these devices produced by the German company Ranco is about 5 years. Consider the malfunctions of the thermostat of the Kils “K” in the refrigerators “Stinol-101/103”, as well as the procedure for their replacement.

Note.

  • The difference between the refrigerators of STINOL models 101 and 103 is that two compressors are installed in the second (separately on refrigerator and freezers). The circuits of the inclusion of compressors in these refrigerators are almost identical, with the exception of the types of elements of the automation system (see. Accordingly, Fig. 1 and 2).

Scheme Electric principled refrigerator Stinol-101

Scheme Electric principled refrigerator Stinol-103

Possible defects of refrigerators in which checks are required, and if necessary, replacing temperature controllers

  • The compressor of the refrigerator does not turn on at any position of the temperature regulator handle. When moving the handle to the position, there is no characteristic click.
  • The compressor of the refrigerator is constantly working even in the position of the temperature controller handle turned off. The temperature in the freezer and refrigerator (MK and HC) is much lower than the norm.
  • The temperature in MK and HC is higher than the norm even at the maximum position (extreme clockwise) of the temperature control regulator handle.

Replacing and checking the thermostat of the refrigerator

On the example of the STINOL-103 refrigerator, we consider the procedure for replacing the K-59 type thermoregulator (labeling of the type and conclusions numbers on its case). The stages of replacement are shown in rice. 3-9.

With the help of an awl or a thin screwdriver, the handles of temperature controllers are pushed and remove (in rice. 3 shown the left handle).

Note

Then remove the decorative pad 2. The lining has 6 protrusions that hold it in the dashboard control panel. Two protrusions are on the sides of the lining and two (from below and from above) at a distance of 17 cm from its edges. Since the lining is made of fragile material, caution is caused by it. Having removed the pad, the nuts 1 fasteners are turned off

Then the hexagonal screws are turned off the fixture mounts. It should be noted that when removing the panel, the screws of the mounting of the doors 1 are removed by the latter

The door must be supported. Turning away all the screws, lift the panel and remove the door. Then, on the back of the refrigerator, the screws are turned off and the top cover is removed.

Remove the thermostat from the dashboard. Previously disconnecting contact connectors from it.

In order not to confuse the connectors when connecting a new regulator, they should be marked. In HC, a plastic pad 1 is turned off and the capillary tube 2 is released.

Remove the lighting block 1. Previously turning the screw drilled in his case.

Pull the capillary tube of the thermostat out through the hole 2.

Install and connect a new thermostat. At the same time, special attention is paid to not damage the capillary tube. At the end of the tube there is a site where there is no insulation material. When installing the tube, make sure that this end is completely hidden under the decorative pad 1 to maintain the tightness of HC, close the hole on the back of the refrigerator, formed during installation/dismantling of the capillary pipe 1

Since the length of the capillary tube is much larger than the necessary, it is neatly laid in the free cavities under the upper lid of the refrigerator.

Ремонт холодильников Стинол проблема нагревателей

The assembly of the refrigerator is performed in the reverse order. It should be noted that after installing the door, the screws of the mounting of its hitch 1 are wrapped lastly.

Checking thermoregulators

It is clear that it is impossible to check thermal regulators at home, for this you need special equipment. However, there is a simple way to check the “eye” of these devices. At room temperature, contacts 3 and 4 of the “K” series of the Kils should be closed. In case of signs of a malfunction of 1, they close the jumper. 3 and 4. If after this the compressor turns on, we can conclude that the thermostat is faulty and it must be replaced.

It should be noted that thermal controllers have tuning screws. They are usually painted with paint and their adjustment without special equipment is not recommended.

Table 1 shows the technical characteristics of the thermostat of the series “K”.

The device is a refrigerator

STINOL brand produces equipment only from reliable materials. The design of the refrigerator is represented by a metal rectangular cabinet with a built.in camera. Frost chamber material. polystyrene. The refrigerator is covered with polyurethane foam, which provides complete thermal insulation. The unit will always give you a signal of pollution and humidity, since a throttle is present in its design.

STINOL refrigerator is one- and two-compressor with a vertical speed axle. The mechanism is located at the bottom of the cabinet and is a metal coil in metal plates.

The equipment also has two types of evaporator:

Refrigerators with the No Frost system gained quite widespread and love user love. Dry freezing is able to preserve more beneficial substances in products, and also not to form icyties on the wall of the chamber.

Device and principle of operation of the refrigerator

The compressor is overtaken by its pressure freon (cooling agent) into the condenser node. There the gaseous refrigerant condenses into the liquid fraction. This process is accompanied by heat release, which is discharged through the rear panel of the refrigerator.

Liquefied freon is supplied to the system of thin tubes, after which it again takes a gaseous state, and when it is in the evaporative block, it boils. Evaporator and generates cold. Freon completes its circulation, returning to the compressor.

The cold that has arisen primarily enters the freezer, and from it is already supplied to the refrigerator. forcibly or naturally.

This gives the freezer the ability to maintain cold temperature even when the aggregate elements are damaged.

In two.compressor refrigerators, one compressor serves the freezer, and the second. refrigerator. This is convenient in that, if desired, you can turn off some of the cameras and use only one

As soon as the lack of cold in the cooling compartment is noticed with a proper freezer chamber, you need to try to analyze the situation yourself.

User actions in case of suspicion of a malfunction of the unit should be as follows:

  • to establish by observation which cold does not get into the cameras;
  • Clarify whether there are any heat sources near the refrigerator, for example, heating batteries, heaters, kitchen slabs, etc. D.;
  • Determine whether the rubber door sealing gasket is valid, whether there are objects (pieces of food, crumbs, etc. P.), preventing the tight closure of the door.

It will also be useful to inspect the rear surface of the refrigerator for the presence of mechanical damage, and all nodes and systems for rye, oxidation.

Reasons for the lack of cold, their elimination

With the good operation of the freezer compartment, the reasons for the breakdown of the refrigerator can be very different.

Both an ordinary temporary absence of electricity on the network, and a serious breakdown of the compressor, which almost always leads to a rather expensive replacement.

The simplest malfunctions of the unit

Before starting an analysis of the problem, you should make sure that the unit is connected to the electrical network, the serviceability of wires, extension cords, sockets, and in good supply of electricity to the room.

One of the perpetrators is a loose closure of the camera door for the user’s oversight. There is a constant intake of warm air from her from the room.

Cold may be absent due to the long period of the refrigerator functioning without planned defronts. It is worth turning off the unit, thoroughly defrost it and turn it on again in a day.

холодильник stinol 104 elk (Стинол) не включается. Замена Термостата

For the correct defrosting of the refrigerator, you need to turn it off from the network, open it wide, extract all the contents and wait for it to completely defrost. It is prohibited to accelerate this process in any way. Talus water is collected in containers and utilized

There are situations when the freezer compartment is filled with products too tightly, so that free space is practically absent.

According to the rules of operation, this is not desirable, since the space for air circulation should still be.

When the products for freezing are close to each other and is tightly tamped, the entire power of the compressor goes to freeze its huge volume, and there are not enough cold for the rest of the cold departments.

It is better to freeze products in small parts. When freezing, it is not recommended to fill the freezer “to capacity”. this is fraught with compressor breakdown

Холодильник Стинол no Frost не включается

The refrigerator itself can be incorrectly installed. close to the wall, when heat cannot be fully allocated, or near the heating devices. temperature detectors are lost.

They give the compressor signals about the strengthening of its power, but cooling in the refrigerating chamber does not occur, because it turns into heat along the way.

This failure mostly happens if the freezer is installed inside the refrigerator. Such a problem is eliminated by a full.fledged prolonged defrosting of the entire unit, installed it away from heating sources, turning on on a standard, and not enhanced mode.

It is forbidden to have a refrigerator close to heat sources. This not only disables it, but also significantly increases the money costs for electricity

breakdowns in conducting systems

Capillary system. The culprit of the breakdown can serve as a mash in the capillary system due to the entry into the pipeline of foreign substances-moisture, oils, litter from the filter and other things that have become unusable and other.

Because of the blockage, the cooler does not reach the end-everything is in order with freezing, there is even ice form. And the products in the second cell do not cool. in this department heat.

Signs of capillaries blockage can be confused with a breakdown of a different nature. a malfunction in the work of the evaporator.

To accurately find out the cause of the problem, analyze the temperature of the discharge system on the “condenser-compressor” section. If the heating there is insignificant or partial, and the cooling is fast, then the reason is in the block of capillaries.

There is an opportunity to correct the situation on its own. if the mash is simple, then the light tapping of the pipeline will move the cork from the place and the path for Freon will be released.

When tapping does not help, you need to contact a master who will professionally clean the tubes, install a new clean filter, replace the freon, remove unnecessary air from the evaporator.

First, the temperature between the compressor and the capacitor is measured, and then the decision is made to replace the capillary tube or on the possibility of its repair

Drainage system. A drainage system in refrigerators with a crying wall can clog. If one does not clean it for a long time, it may appear in it, which do not completely pass the melt water, it accumulates at the bottom of the camera and flows out.

Over time, the plastic cracks, and the water flows into the gaps and oxidizes the metal parts of the device, corrosion corrodes them, and the refrigerant begins to flow out.

Почему не морозит морозильник Stinol?

Clean the drainage system using a conventional pharmacy rubber pear. It is filled with hot water and poured into the canal with a sharp movement under the greatest pressure.

If necessary, this is repeated several times until the system is completely cleaned. Dirty merged water from a special tray after the procedure should be removed.

Refrigerators are produced with a small ruff in a drain hole. It is designed to regularly clean the entrance to the drainage system. The cleaner it is, the less chance to get a large blockage of the system

Another device for cleaning the drainage system can be a bicycle/car manual pump. If these devices are not available, or the blockage has settled very firmly, a long wire/wire will help.

The tip of the wire is bent into the loop and with twisting movements is inserted into the drain hole, while handing it back and forth. The duration of the procedure is about three minutes. You can combine two methods. cleaning with wire with a strait water.

For what reasons, the two.chamber refrigerator “Stinol” does not work

It happens that a two.chamber refrigerator does not freeze, and the light in the department is on fire. The cause may be a freon output again. You can understand this by ice on the evaporator or in the leakage area. The check is also carried out:

  • In modern models, installation is checked. If the case leaned forward, the door could open, so warm air enters the chamber. The refrigerator “understands” that it makes no sense to start the motor. The case should be slightly rejected back. To do this, twist the front legs of the refrigerator.
  • When heat and light does not burn in the cells, electrical parts are inspected: wiring, fork, network cord, outlet. Maybe something was overstated or damaged. Then you need to replace the spoiled element.

To make it easier for you to deal with a breakdown, we advise you to pay attention to the signs of a malfunction:

  • You noticed that the light in the cell is on, but the compressor does not start? Perhaps the clicks of the relay are heard, which is trying to start the engine. So the motor burned. The burnt part is not subject to repair, a new element is installed.
  • Refrigeration equipment (I) with electromechanical control does not work, but the light bulb is glowing. The temperature controller is faulty. He does not send the control board data, so the module does not include cooling.
  • If the light burns in HO with electronic control, but the compressor is “silent”, the termistor is checked. He measures the temperature in the chamber.
  • The bulb in the chamber does not glow, the technique does not turn on. There were problems with a start-up relay that launches the motor-compressor. The relay is replaced by a new part.
  • If the refrigerator does not at all give “signs of life”, while the wiring is working. the problem is in the control module, it cannot control the nodes and details in the technique. Therefore, diagnosis, flashing or replacement of the module is carried out.

No cold in the freezer

Most of the modern STINOL refrigerators are produced with two engines. Each of them is responsible for the work of the upper and lower chamber. If the freezer compartment independently defrosts and does not cool anymore, there may be two reasons:

  • Damage to one of the compressors. Check this is easy: touch both compressors. If they are hot, then the case is in the interitoral circuit. Perhaps the problem with the windings happened as a result of a short circuit. The windings are nicknamed the multimeter, repair is carried out.
  • Когда один компрессор нагревается, а другой нет, проблема в автоматике или системе охлаждения «No Frost». The reason can be in the evaporator, relay, thermal attemptor. Diagnosis will help to determine the exact cause.

To cope with a breakdown, watch the video:

To avoid troubles with the refrigerator, as well as to extend its service life will help compliance with operating rules:

  • Correct placement. It is unacceptable to install equipment near hot batteries, furnaces, close to the walls and furniture.
  • Timely defrosting. In this case, mechanical removal of pieces of ice in the chamber is not allowed.
  • The correct overload of the shelves of HO and its doors leads to the rapid wear of the details.
  • The temperature of the products. Only cooled dishes can be placed in the refrigerator.
  • Temperature control on the regulator. Do not install the thermostat in the department for the full power for a long time.

If you find a malfunction, do not delay the repair, call a specialist. Now you know what to pay attention to so that the technique has been working uninterruptedly for many years.

The refrigerators of the domestic brand of Stinol with Italian origin are a reliable technique of European level with excellent characteristics. Users have noted such distinctive features in these household appliances as high.quality assembly, reliability, durability and democratic price. Despite the fact that the devices of this brand are no longer produced, many families still work in STINOL units. But even with care of care, over time, various malfunctions occur at the Stinol refrigerator. In this review, we will consider what difficulties the owners of different models of these kitchen units face.

Features of the device

The refrigerators of this brand consist of a standard rectangular metal wardrobe with a built.in inner chamber. The freezer is made of durable polystyrene. Between the two blocks is filled with polyurethane foam, which is a powerful thermal insulation material. The capillary pipeline performs the role of a throttle in the diagram. Thanks to this part, the refrigerator becomes sensitive to high humidity and pollution.

Depending on the lineup of the model range, 1-2 compressors are installed in the technique, which have a vertical axis. The part is located in the lower cabinet block. The device is a coil of a steel tube fixed in metal plates.

Why does the stinol refrigerator not freeze and how to fix the situation

Stinol refrigerators. products of the refrigerators of the same name of the same name. This company is a division of the Novolipetsk Metallurgical Plant. The name of the brand is a reduction from “Steel from Novolipetsk”. In the middle of the two thousandth, the plant was bought by the Italian company “Indesit”. One of the frequent problems of Stinolov’s devices is not a low temperature in the refrigerator or freezer.

Of course, if the stinol refrigerator does not freeze, then the best solution will be to contact the workshop. For example, to us: Repair of Kazan refrigerators. However, before calling the master at home, you should try to deal with the problem yourself.

Deviations from the norm

The normal temperature for storing products in the freezer is considered.18 degrees, in the second department 5 degrees. With such indicators, the products do not deteriorate. In order to make measurements, you need to put a container with water and a thermometer for several hours in the refrigerator at such a temperature in the refrigerator.

If the problems are noticeable without any measurements, you need to start with the elimination of the simplest reasons:

  • The manufacturer indicated that the Stinol refrigerator should be operated at a temperature of not higher than 32 degrees. Therefore, in the summer, Stinolovsky devices can work incorrectly. The refrigerator should be removed from heat sources, make sure that the sun’s rays do not fall on it, which in the hot season contribute to heating the body.
  • Products before sending for storage should be cooled. Do not exceed the rate of bookmarking by weight. Some owners have a bad habit of holding the door open for a long time, choosing a product. It is harmful to the refrigerator.
  • Sometimes a temperature regime is incorrectly set. If there is a need to replace a thermostat, you can contact the STINOL refrigerators service at home.

Independent diagnosis

First of all, they recommend a defrosting of the unit, and then turn it on again. This alone can help. It is useful for some time to put the regulator to position 1. If these measures do not benefit, most likely the reason for the lack of frost is as follows:

  • The leature of the door seal. Especially relevant for devices with long.term operation. Tested visually, to the touch and using a sheet of paper. The sheet is obsessed between the door and the body, the door closes. If the paper is well fixed, everything is in order. Thus you need to walk around the entire perimeter of the rubber nozzle. Where the sheet will move freer. and there is a place of air penetration inside the chamber. At home, a problem place can be heated with warm air, given the correct shape and close tightly. Feng is suitable for this purpose. If the deformation is large, you have to replace the part.
  • If a snow cap has accumulated inside the freezer, you need to look at the back wall. is there any detachment. Such deformation violates normal heat transfer between the freezer and the next camera and the refrigerator STINOL does not freeze. You can diagnose such a problem in a neglected form even to the touch: the wall will bend. Or visually. it is swollen. Such a nuisance sometimes happens to STINOL devices if the correct assembly conditions are not met, or poor.quality details were used. Repair of such a breakdown is not a matter of light, and does not always give a positive result. Some masters advise to press the wall more tightly by shelves. People’s craftsmen sometimes try to fasten the exfolved part with plastic bolts. But with careless drilling, you can damage the evaporator contour, and this is even more serious breakdown.
  • It is necessary to listen to the compressor work. Is he buzzing? Works with or without breaks? If the compressor does not publish any noise for a long time, then it probably failed. Without normal compressor operation, the Stinol refrigerator will not freeze. Symptom of the incubation. the work of the motor without a break. Soon it will certainly become unusable, you need to urgently take measures. Determine what exactly has broken in a compressor. for an unprepared person a difficult task, it is better to seek help from a specialist or workshop.
  • Normal heat transfer in the refrigerator is hindered by the blockage in the tubes along which the refrigerant moves, especially in the capillary tube. This is diagnosed using special devices, at home you should listen to the sounds of the refrigerant in the freezer. In the case of a blockage from the freezer, a characteristic quiet murmur of Freon is not heard. You can eliminate the blockage independently, having special equipment.
  • Frequent cause of deviations in work. Freon leakage. If it was not possible to find a crack in the circuit, there is no oil spots on the refrigerator or near it, you can diagnose the loss of the refrigerant by measuring the pressure in the circuit. For this, specialized devices are also needed. In most cases, the elimination of holes and filling the refrigerator by Freon can only be carried out by a specialist.

If you decide to defrost the Stinol refrigerator with the No Frost system, be sure to defrost at least a day with open doors. It is necessary that there is no water left in the drainage system, otherwise the technique simply will not freeze properly.

Stinol refrigerators

STINOL is one of the few domestic manufacturers of refrigerators, which for a long time occupied a leading position in the market and the CIS countries.

At the moment, Stinol refrigerators are not produced, but our compatriots have a sufficient number of working household appliances of this brand in the apartments.

Despite the high quality of the assembly, over time, various malfunctions of Stinol refrigerators are found, which can manifest themselves differently depending on the causes of their occurrence.

The most common malfunctions of Stinol refrigerators

What to do if the refrigerator Stinol broke? Do not rush to call specialists, because many malfunctions can be eliminated independently, because their cause is our inattention or violation of operating conditions.

STINOL refers to the most common signs of a breakdown of two.chamber refrigerators:

  • The refrigerator does not turn on.
  • The compressor is constantly working.
  • The refrigerator is poorly freezing.
  • Light does not burn or problems with indication of light bulbs on the control panel.
  • Problems with the No Frost system in the freezer.
  • Water flows in three.chamber and two.chamber refrigerators with the “Crying Wall” system.

There are a lot of reasons for the emergence of certain malfunctions, so let’s look at each option in more detail.

The “Super.Summary” or “Fast cooling of products” was established

In this case, the freezer or refrigerator will constantly work until it reaches the default temperature. In this mode, the compressor does not turn off and continues to escalate the cold until 8 hours in a row.

Violation of sealing the seal or an unclosed door

The refrigerator will always strive to achieve the required mode, but due to the presence of warm air, the compressor will work all the time. Indirect feature. frost around the perimeter of the door.

Control system or failure of a thermal attemptor

A special sensor inside the freezing camera or refrigerated compartment determines the current temperature and when the set value is reached. directs the signal to the control module, which gives the command to disconnect. In the case of a failure in one of the nodes (sensor or module), the compressor does not receive commands and continues to work. If you do not contact a specialist in time, then the compressor will quickly fail, as it will work for wear.

The refrigerator is poorly freezing or even stopped overstruming the cold

In addition to domestic reasons (accidental shutdown from the control or de.energization panel), the refrigerator does not freeze in only a few cases:

  • Refrigerant leak.
  • Compressor breakdown.
  • The failure of the protective motor relay.
  • Electromagnetic valve breakdown (for two.chamber single.compressor refrigerators).

Each of faults can lead to the fact that the refrigerator stopped freezing for no apparent reason.

The situation is a little different when the stinol refrigerator is in working condition, but the cold is not enough. The most common reason is the random adjustment of the thermostat handle (temperature reduction). If the handle is mechanical and is located inside the refrigerator compartment, then it can be easily offered during loading/unloading products (especially in the upper chamber).

If a model with electronic control, then a possible reason will initially be the wrong setting of the operating mode or the game of children. Check the position of the thermostat handle or the set temperature value on the display. Also, one of the reasons may be the incorrect factory calibration of a thermal attemptor and control unit.

In this case, it is worth contacting specialists who will repair the refrigerator at home.

No light or an indication problem

If the lighting bulb inside the refrigerator does not turn on, then there are only three probable causes of a malfunction:

  • The incandescent lamp just burned out, and it must be replaced.
  • The pusher key broke (a spring flew out). In this case, it will be advisable to replace the entire backlight unit along with the plafon and button.
  • Cliff in the electrocope of the refrigerator. In this case, you can not do without the help of a qualified specialist.

If the STINOL refrigerator does not burn or specific operating modes of the refrigerator, then the simplest reason is the absence of current on the network or the mechanical switch on the front panel is in position “0” or “OKL”. If the problem is not this, then the face violation of contacts in the indication system or failure of the control module.

Problems in the No Frost system

One of the last Stinol refrigerators that came off the assembly line in Lipetsk. there were models with the automatic thawing system No Frost. During the operation, the main malfunctions were manifested, which have the following signs:

The freezer is buzzing

Most likely there were problems with the thawing system, and hoarfrost began to form on the back of the evaporator. A fan that evenly distributes the air inside the freezer begins to rub on a snowy “fur coat”, which causes extraneous sounds. Replacing the heating element of the thawing system in most cases solves this problem.

Inside the refrigerator is noisy, the beating is heard

In this case, the most likely reason is the breakdown of the fan. Constant rotation leads to the natural wear of the bearing group, the first sign of which are beatings and noise. It is recommended to replace the fan until it completely fails, otherwise there will be no uniform spread of cold air inside the chambers, which can lead to a failure in the operation of electronics.

Leak the refrigerator

If the refrigerator flows from below, then depending on the type of defrosting system, there are different reasons:

  • If the refrigerator Stinol No Frost flows, then the automatic thawing system is most likely out of order. If it is not repaired on time, then in a very nearby compressor will fail due to constant work for wear.
  • In the case of refrigerators from the drip system, there may be several reasons. the condensate container fell, the pipe jumped out or the drain hole was clogged inside the refrigerator. All these malfunctions are eliminated independently without involving specialists.

Reasons why the stinol refrigerator does not freeze

In the modern two.compressor unit with the No Frost system, two separate relay controls the temperature inside the chambers and two separate contours are cooling.

If a household refrigerate unit works, but cannot maintain the necessary temperature in the upper chamber, and in the lower products are well cooled, the reason is either in improperly set settings, either in internal breakdown, or in the leak of the grocery compartment.

You can understand for what reason the stinol refrigerator is badly freezed if you perform a number of actions.

Long defrosting and correct inclusion in the work

Before any manipulations with the device, you need to turn it off from the network and remove products and empty containers from it. In order to understand whether to change the refrigerator according to the warranty or it is working, you need to defrost it completely and let it stand for a day without connection and without products. This is done in order to completely remove condensate from the system.

  • The reason that the upper chamber does not freeze in the refrigerator, and the lower one works, can be an accidentally selected fast frost mode or hasty simultaneous laying of a large number of warm products into the compartment.
  • Especially often the problem of poor cooling against the background of the good operation of the freezer is pursued by the newly purchased units.
  • Another reason why the top chamber of the Stinol refrigerator does not freeze is often a fan malfunction: its blades can be covered with ice and jam, which is why the leading electric motor can burn out.

You need to upload the device only after a few cycles of turning on-off the compressor and reach the operating temperature. Products need to be applied in small portions, taking breaks to cool them.

Elimination of warm air leaks into the upper chamber

If the defrosting did not help and the matter does not concern the new device, the reason why STINOL stopped cooling the products well, may be in the leakage of the sealing gum on the door.

The constant ingress of warm air outside does not allow the device to reach the desired mode and turn off the compressor, which provokes the rapid formation of ice (hoarfrost) on the back of the department. If defects are detected in the seal, it is necessary to replace it. You can do this yourself or calling the master at home.

Diagnosis of internal breakdowns of the refrigerator

Understand what the problem is and why the Stinol refrigerator does not hold the temperature poorly, you can look at additional symptoms of the malfunction:

  • The lack of a characteristic sound of his work is indicated about the breakdown of the fan. If, on the contrary, a loud noise is heard, it means that its impeller and working space are covered with ice and defrosting is required.
  • On the breakdown of the motor, which leads the compressor of the upper chamber, indicates the inability to launch the unit for more than a few seconds and the flow of oily liquid from under the case.
  • About the leakage of the refrigerant from the contour of the product section, in addition to the fact that Stinol has stopped freezing, several symptoms are said: bloating on the plastic walls of boxing and their icing (often uneven); spots and streams of rust on the case near the freezer; Long.term continuous operation of the compressor, an almost non.heated condenser wall. Sometimes symptoms are noted at the same time.

One common problem. the upper chamber of the refrigerator does not freeze for an unknown reason. it unites several more internal breakdowns, which only “opening” will help and diagnosis of individual units of the system.

Most often out of order on Stinol refrigerators, as on most others, they come out:

  • Start relay. The reason for its breakdown is wear or short.term voltage jump.
  • Filter-dryer. Oil decomposition products clog the capillary system and interfere with the circulation of the refrigerant.
  • Thermal attemptor or sensor sensor (on modern electronic models). Sensors stop working from a voltage difference or from internal defects.
  • Temperature controller. Relay fails either due to mechanical wear, or after a voltage jump.

It is possible to reliably establish why the STINOL refrigerator has stopped maintaining the desired temperature of the products, although the freezer works, only by opening and diagnosing the device. If the recommendations from the first part of the article have not come up and the upper camera still works badly, it is better to invite a qualified master. He will find out why this is happening.

Stinol refrigerator does not work, reasons

What to do if the refrigerator “Stinol” does not work? It is worth trying to determine the breakdown. Perhaps you can eliminate the problem yourself, and our article will help in this.

STINOL refrigeration equipment is known for high quality. The metal case of equipment is always covered with corrosion solutions, special painting technology provides prolonged operation without scratches and defects. But even high.quality technique can break.

The refrigerator does not turn off and constantly works

This is the most common cause of non.betting in the refrigerators “STINOL”. If your technique with one compressor does not turn off, pay attention to the signs of a breakdown. You may notice that the freezer department is normally freezing, and the upper refrigerator does not work.

The cause of the breakdown can be in the leakage of the gas-freon. This is a refrigerant that is responsible for cooling air in the departments. The leak may be in the steel circuit. To eliminate the malfunction, it is necessary to detect damage, eliminate them and refuel the system with freon.

  • The door of the refrigerator. How tightly it is closed? The cause of loose fit could be the loops that sagged due to the large load of the door. After pulling the loops, the door will be normal to close.It is worth checking the rubber seal. over time the rubber wear out and is polluted. You can replace the seal with your own hands.
  • Set temperature in the chamber. If electronic control, temperature adjustment is automatically performed, and if mechanical, then manually. Check, perhaps the “Super.Summarrons” mode is installed on the thermostat.
  • Ventilation quality. With poor ventilation or installation near the heating radiators, the refrigerator overheates. Trying to compensate for the temperature increase, the motor works without stopping.

If after the check everything turned out to be in order, the case is in the breakdown. What happened:

  • The termistor and thermoregulator broke. In this case, the control module does not receive temperature data in the chamber, so the compressor does not turn off. A faulty sensor needs to be replaced.
  • Clogging of the capillary tube. Due to depressurization, a blood clot formed in the tube, which does not allow the refrigerator to circulate normally. It is advisable to call a specialist who will find the location and eliminate the problem.
  • Fault of the motor-compressor. During prolonged operation, the motor parts wear out, as a result, the compressor lacks power to pump pressure into the tube, so the set temperature is not achieved. The motor needs to be replaced.

Do not wait for a complete breakdown of the motor. Call a specialist for repair, because during constant work on the compressor there is a double load.

For what reasons, the two.chamber refrigerator “Stinol” does not work

It happens that a two.chamber refrigerator does not freeze, and the light in the department is on fire. The cause may be a freon output again. You can understand this by ice on the evaporator or in the leakage area. The check is also carried out:

  • In modern models, installation is checked. If the case leaned forward, the door could open, so warm air enters the chamber. The refrigerator “understands” that it makes no sense to start the motor.The case should be slightly rejected back. To do this, twist the front legs of the refrigerator.
  • When heat and light does not burn in the cells, electrical parts are inspected: wiring, fork, network cord, outlet. Maybe something was overstated or damaged. Then you need to replace the spoiled element.

To make it easier for you to deal with a breakdown, we advise you to pay attention to the signs of a malfunction:

  • You noticed that the light in the cell is on, but the compressor does not start? Perhaps the clicks of the relay are heard, which is trying to start the engine. So the motor burned. The burnt part is not subject to repair, a new element is installed.
  • Refrigeration equipment (I) with electromechanical control does not work, but the light bulb is glowing. The temperature controller is faulty. He does not send the control board data, so the module does not include cooling.
  • If the light burns in HO with electronic control, but the compressor is “silent”, the termistor is checked. He measures the temperature in the chamber.
  • The bulb in the chamber does not glow, the technique does not turn on. There were problems with a start-up relay that launches the motor-compressor. The relay is replaced by a new part.
  • If the refrigerator does not at all give “signs of life”, while the wiring is working. the problem is in the control module, it cannot control the nodes and details in the technique. Therefore, diagnosis, flashing or replacement of the module is carried out.

No cold in the freezer

Most of the modern STINOL refrigerators are produced with two engines. Each of them is responsible for the work of the upper and lower chamber. If the freezer compartment independently defrosts and does not cool anymore, there may be two reasons:

  • Damage to one of the compressors. Check this is easy: touch both compressors. If they are hot, then the case is in the interitoral circuit. Perhaps the problem with the windings happened as a result of a short circuit. The windings are nicknamed the multimeter, repair is carried out.
  • Когда один компрессор нагревается, а другой нет, проблема в автоматике или системе охлаждения «No Frost». The reason can be in the evaporator, relay, thermal attemptor. Diagnosis will help to determine the exact cause.

To cope with a breakdown, watch the video:

To avoid troubles with the refrigerator, as well as to extend its service life will help compliance with operating rules:

  • Correct placement. It is unacceptable to install equipment near hot batteries, furnaces, close to the walls and furniture.
  • Timely defrosting. In this case, mechanical removal of pieces of ice in the chamber is not allowed.
  • Correct. Overload of the shelves of HO and its doors leads to the rapid wear of details.
  • The temperature of the products. Only cooled dishes can be placed in the refrigerator.
  • Temperature control on the regulator. Do not install the thermostat in the department for the full power for a long time.

If you find a malfunction, do not delay the repair, call a specialist. Now you know what to pay attention to so that the technique has been working uninterruptedly for many years.

No light or an indication problem

If the lighting bulb inside the refrigerator does not turn on, then there are only three probable causes of a malfunction:

  • The incandescent lamp just burned out, and it must be replaced.
  • The pusher key broke (a spring flew out). In this case, it will be advisable to replace the entire backlight unit along with the plafon and button.
  • Cliff in the electrocope of the refrigerator. In this case, you can not do without the help of a qualified specialist.

If the STINOL refrigerator does not burn or specific operating modes of the refrigerator, then the simplest reason is the absence of current on the network or the mechanical switch on the front panel is in position “0” or “OKL”. If the problem is not this, then the face violation of contacts in the indication system or failure of the control module.

Why did the refrigerator stop cooling, and the freezer works and buzzes?

Try to process the sealing area using soapy solution. In no case do not use acid or alkaline components for cleaning, since rubber can lose its properties, and then in any case you will have to remove it, replace it with a new. Do not use to clean abrasive substances. The usual soap solution is suitable. If this did not help, or the space behind the sealing elastic band is clean enough, without visible crumbs and damage, while the elastic band is tightly adjacent, the door closes perfectly, you can expand the refrigerator, evaluate the condition of the back wall.

Why the refrigerator stopped cooling, and the freezer works and buzzes:

  • It is in the area of ​​the rear wall that there are often invisible damage that appeared after transportation, transportation of the device. Some of the tubes may be damaged, a slight dent appeared.
  • If you notice that after the delivery of a new device on the back wall there are some recesses and dents, while the tubes are located unevenly, do not sign the document on the proper condition of the device and send it back.
  • Even if the device works, with time, sorcerers, dust dust can accumulate in the deformed area, which will lead to blockage of the cooling system. Most likely, it is in this place that the tube will clog, the refrigerator will not perform its functions.

What to do if the two.compressor Stinol stopped cooling?

There are situations when light burns in the refrigerator, but one of the engines does not work and the refrigerator stops cooling. At the same time, the second motor can work properly, but be very hot.

In this case, the malfunction is most likely associated with problems in automatic devices, such as the starting relay, the temperature or the No Frost system (if any). The specialists of the service center should establish a more accurate reason. The fact is that if you begin to clarify it, by exclusion, sequentially replacing everything that can cause a breakdown, you can achieve a completely opposite result. This is due to the fact that each relay, transistor and sensor have their own marking. If you purchase a spare part, which, in appearance and connector, is fully consistent with the faulty, but the letter or figure in the marking will differ from the original, this can cause unpleasant consequences, the most harmless of which will be knocking out the machine in the shield.

As practice shows, such initiative often leads to combustion of one, or two compressors at once.

If the owner really has a technical education, reads electrical circuits well and can qualitatively perform repairs with your own hands, it is recommended to purchase spare parts only in the service center, where, as a rule, there are necessary elements for the entire lineup of refrigerators.

Common breakdown of STINOL equipment

The full line of models of the Stinol refrigerated equipment has quite high reliability indicators and is able to work without breakdowns for several years. Nevertheless, these units, like the refrigeration equipment of each other manufacturer, do not have insurance from the sudden occurrence of violations in work, and also have weaknesses.

“Diseases” of the corps

When the steel cabinet of the refrigerator is damaged, a small volume of hoarfrost is formed on the evaporator, which leads to the accumulation of a significant volume of liquid in the container for collecting condensate. This condition is the result of a violation of the tightness of the camera for the following reasons:

  • loose fit or defects (rupture and other) elastic bands of the seal;
  • deformation of the metal case and its parts;
  • gaps between the surfaces of the freezer and sealing elastic band.

So that the sealing gum, when it stretches, return the initial parameters, it can be “pulled” with a low.power hair dryer, with a power of up to 1.5 kW. To do this, warm the elastic of the seal in the place of fit with hot air and pull a little. to restore the original shape of the part. Upon completion of the manipulation of the refrigerated cabinet door, closed. Continue to use the refrigerator is allowed only after the rubber seal is completely cooled. When the protective layer breaks, then it is replaced.

Failure of automation and electrical elements

Often malfunctions occur with components of an electric circuit or automation devices. These include the following:

  • trigger or thermal relay malfunctions.
  • fan, compressor and other component elements;
  • decrease in the insulation resistance of the electrical circuit;
  • defects of the timer and freezer;
  • clogging of the drainage system by particles of food and similar;
  • malfunction of the heater of the evaporator pallet.

The elimination of automation breakdowns in STINOL units is to detect a defective component, repair, and when it is impossible, replacing the element with a new part.

Reflash

Когда превышен объем фреон во время заправки трубопровода. the temperature is less than.18 ̊s, it is cool in the refrigerator compartment, and the return tube is covered with a layer of hoarfrost or covered with condensate. To normalize the functioning of refrigeration equipment, after running in for two hours, the volume of refrigerant is corrected.

Когда дозировка заправки понижена, холодильный агрегат достаточно теплый, а температура понижена свыше, чем на.25̊ p. In the back wall, he is capable of forming. The solution to the problem is similar to what is used with an overstated volume of refrigerant. the dose is adjusted to normal.

Когда наблюдается утечка фреона, в зоне нарушения герметизации трубопровода наблюдаются маслянистые пятна. To eliminate the malfunction, it is necessary to store breakdown and refuel the unit by a refrigerant.

Thermostat problems and their diagnosis

The temperature controller fails quite often and this is the result of the fact that the German.made part from Ranko is designed for operation for five, but not more than 6 years. When the thermostat goes out their system, the compressor also does not turn on and, in order to prevent further malfunctions of other components that begin to occur with a broken thermostat, the temperature controller must be fixed. At home, it is difficult to diagnose the component’s performance, but it is possible. There are two options for checking the working condition of the thermostat:

  • Contacts of the thermostat must be closed, due to this, the continuity of the electric circuit is maintained and energy is supplied to the compressor input in the input. Check. whether the food is present and, when it is not, they call the integrity of the chain completely. from the outlet. When the food is present, it is turned off and nicknamed specific contacts. When they are cut off, the thermostat must be replaced with a new.
  • The input contacts of the thermostat are closed using a jumper (among themselves, a tool with an isolated handle and a conductive working part is used). When the compressor begins to work, this indicates a malfunction of the thermostat. When the compressor does not start, the problem is not in it. The malfunction is also possible to identify “by ear”. during the mechanical turning of the thermostat switch there is a click and when it is not, most likely the thermostat fails.

Each malfunction of the stinol refrigeration equipment, the age of which exceeds 10 years, must be considered by the master. Repair of these units mainly involves the replacement of a faulty part of the working.

About checking the thermostat

The temperature controller often fails, as could be understood from previous stories.

This is due to the working resource of technology, which is enough for a maximum of 5-6 years. The compressor does not start in the refrigerator when this part is broken. It is different when the upper chamber does not freeze in STINOL models.

There are two ways to determine the working condition.

Only in this case is the divisibility of the electrocope support. If necessary, check if the power supply is going on. If something is absent, then the whole system is watched on the subject of integrity and the presence of any removal. If some parts have broken off, they replace.Refrigerator repair helps to cope with difficulties.

If after this the installation does not turn on, then the problem arose somewhere else. By ear, the problem can also be determined depending on where and how additional sounds appear.

If the unit is already more than 10-15 years old, then any malfunctions require a specialist call. Otherwise, the repair of the refrigerator will be dangerous.

about diagnosis and existing problems

Water often appears and accumulates inside the units with a drip system inside the refrigerator compartment. Zoror drainage system is the main reason for the appearance of malfunctions. The purpose of the design is to drain water from the chamber. It passes inside the stinol 101 refrigerator.

If a snow fur coat appears in the freezer, this is also one of the signs of a malfunction. Drainage begins in the compartment where products are stored. Therefore, the presence of a hydraulic plant in this part is mandatory to avoid problems in the future.

note. In practice, this detail looks like a bend of small dimensions. Inside such a part, pollution and other similar components are delayed. The manufacturer often implements additional tools with which cleaning is carried out.

After such actions, the outflow of water should improve. With strong clogging, such actions do not help, there is a need to break through the structure.

The main thing is to adhere to a neat approach. The tubes are made of thin.leaved plastic, which is too easy to damage. It is recommended to use fishing fishing lines, which have a slightly melted end. Get an impromptu cable, which, after immersion inside and clean the system. Then everything is filled with a washing solution, the insides of the STINOL 101 technique are washed with water.

Compared to “crying” systems, constructively options “without hoar” are considered more complex. They differ from existing analogues in that they contain a blowing system to remove excessive moisture. Fan, fuser and timer. the weakest places in systems.

The fan comes from the freezer. The detail is closed or open depending on the model.

Open devices with electronic controls are practically not subject to independent repair, you only need to call the master. Another thing is when the device is simpler, with electromechanical elements. Enough access to the inside. When they get to the fan, carefully study the structure and check the impeller. The knot accurately requires analysis if everything goes tight and does not lend itself to movement. STINOL 110 is repaired almost the same.

About the author

| Denial of responsibility | Contacts |RSS