T shirt neck processing without overlock

Wells processing on thin knitted canvases

It turned out to be with you to talk about the processing of the neck on knitted dresses and on some sweaters.

There are many different ways of processing the neck. In many ways, they depend on the type of knitwear and fabric density. Sometimes the fabric “dictates” and sets its conditions.

When there is a collar or a hood, this is one thing. When without a gate. Completely different.

Today we will look at the option without gates.

By the way, with dense knitted canvases everything is easier. For example, to Jersey, you can generally apply the most common method of processing with a stoop, as we do on the most ordinary dresses. This is so obedient and grateful fabric that it takes almost all processing methods.

But with thin knitted canvases, the situation is more complicated. In addition to processing cleanly and beautifully, you need to try so that the neck is beautifully lying and does not stretch.

I have prepared for you a video tutorial in which I show my favorite way of processing the neck on thin knitwear.

Firstly, the neck adjoins beautifully even on the in-depth neck. Does not lag behind, does not protrude when tilted, showing the world underwear))

Secondly, it does not stretch and does not deform. With this method of processing, there is not even a chance to stretch.

And thirdly, it turns out beautifully, subtle and neatly from the inside. And the wrong side, you know, this is the face of clothes.

Follow the link, watch the lesson, take note of important points. I am sure you will appreciate this simple method in execution.

And, of course, comment on! I love when you write Комментарии и мнения владельцев and share your impressions, and not just look at the snatch))

Exchance’s neck processing

Materials and tools

• Material for oblique fiber (about 1 m wide 5-6 cm).
• Scissors.
• French pins.
• Simple pencil.
• Sewing machine.
• Tape measure.

Working process

• Sovele a simple pencil for a trimmer for the first line along the neck of the product. Use a centimeter tape for this. The seam should be located at a distance of 1 cm from the edge of the cut.
• Cut the fragment for a slanting fabric bought fabric. Fold it in half and continue. Form both ends in the form of slightly rounded, but sharp at the base of the parts. On the intended lines, create a direct seam.
• Next, go to the connection of the cutting cut with the box. Attach a strip of fabric to the resulting seam. The center of the strip should take place along the line. Fix with pins if the fabric is too slippery. Add the box to the base along the seam line with a new straight stitch.
• Check the line for the presence of holes and unnecessary threads. If everything is done carefully, cut the extra edges of the base material and inhibitory.
• Using sharp scissors, make small segments on both layers of fabric at a distance of about 1 cm. You can perform them by eye or centimeter, always from the outer edge, which will hide under another layer of inhibitory. Be careful not to cut the seams. This step is important so that the neck is not pulled out and is not corrugated.
• Bend the upper layer of the oblique inhibitory on the front side. It can be ironed with an iron to avoid unnecessary folds, and the fabric fit tightly to the base for a light line. Using the mode and needles for dense fabrics, go to the slanting base along the entire neck of the neck at a distance of 1 mm from the edge.
• At the site of the end of the ends, insert them one into the other and complete the line with a zigzag. You can do this from the inside so that the edges are less fraught.

The unconditional dignity of the scythe is its reliability. It will not allow the product to deform and end. It can also be performed with a straight seam and manually. If you plan to make a fastener on the neck, before that it is better to process the fabric on the shoulder seams. All suture allowances are ironed before the mark.

The method is perfect for T.Shirts and tops, as well as for processing the armhole.

We process the neck with a fabric from which the product is made

Be sure to cut the collar along the oblique. The neck will not lie on the shared thread, but will stand asleep. We take the same width the same. About 4 cm of allowances 7-10 mm

The usual knitwear does not stretch as much as Kashkors and Riban, so we take away from the gate length 3-5 cm, depending on the extension of the material

In general, such processing does not differ from the last version, but there is a feature: when you finish working on an overlock, iron the line on the product, and only then form a circle, gently ironing the gate from the front side.

The fastest and cheapest option is to pick up a T.Shirt on your own at home.

If your product is made of dense fabric, which does not crumble, then you can safely cut it. And if there is a risk that the fabric can “go” or crumble, then it is better to first process the edge with an overlock.

The bottom of the T.Shirt after circumcision must be treated with a hidden cross.Shaped seam, which is usually called “goat”.

Seam “goat”

Such a seam is made quite simply, even a novice seamstress will cope with it. One or two threads (at your discretion) are captured by a needle from below and from above from cut allowance. At the same time, you need to carefully ensure that the seam is not visible from the outside.

The thing you are going to cut and pave it should be clean and stroked.

Some processing methods

Of course, these are not all processing options, but the most interesting and most used in working with woven canvases.

How to sew knitwear without sprains. My secret

In this article you will learn how to sew knitwear fabric without wrinkles, sprains, missed stitches and without breaks.

Isn’t that wonderful? Using one trick, you will prevent tissue stretching when sewing on a home sewing machine, and finally you can sew knitwear without problems!

And this trick, most likely, is already in your closet with sewing accessories!

This is the best advice on sewing knitted fabric that I was ever given.

You are already in suspense? There is nothing special for this. Neither needles are needed in round tips, nor long explanations about the tension of each thread.

The only thing we need. This is translucent paper for patterns!

This is one of my oldest tricks in sewing. And I found out about this from one of my teachers by sewing. And she saved me more than once. Especially when I am very in a hurry to finish the work. It is especially useful to use paper when sewing light or knitted fabrics.

Everything is very simple: fold the fabric in the right way, and then put the paper to the edge of the fabric and sew.

At first I sewed on paper, and then bent the paper and began to sew in the same line, on the same fabric, but without paper. See the difference?

The line on paper is very clean and smooth. But when I removed the paper, it becomes uneven, stretches and the stitches are passed.

Usually for sewing I use scraps from patterns, so I use this paper almost completely.

The paper is removed also very simple: we tear it out first on one side, then on the other and gently pull it out of the seam.

In the second part of the experiment, I put the paper under the fabric and stitched. I do this sometimes when I sew small details that have to turn and hold close to the line.

The result is the same: a straight flat line without gaps and sprains.

Disconnecting paper from a straight line is very simple!

The only difficulty. Separate paper when you use a zigzag line. But it’s not a problem. Keep at hand for eyebrows at hand. And everything will be all right!

Additional advice: Sometimes, if tracing paper does not help, I even take paper for the printer. She gives the best seam, but it is a little harder to delete.

T.Shirt neck processing without overlock

I spied this type of processing on a purchased company dress. This processing is very useful for those who want to sew beautifully knitwear. But does not have an overlock. Very often on knitted products the neck and armholes are processed with a stool or a gateway of the edge treated with an overly with a subsequent tanking with a double needle. But usually novice masters have no overlock. The processing of the edge with a zigzag stretches it, which is not at all beautiful. But I want to sew beautifully, because the wrong side is the face of the dressmakers. This does not mean that we must refuse to work with knitwear. It is enough to choose the material that does not give an arrow during transverse stretching, then the lateral and shoulder sections can not be processed at all, and the neck and armhole can be treated with the proposed way.

Before processing the armhole, it is necessary to grind the shoulder seams. Lay out the product on a flat surface and straighten the armhole.

We cut a strip of knitwear 2 cm wide., not in shared, but across (at right angles to the edge) of the cut of fabric. In this direction, knitwear stretches the most. The length of the strip should be slightly longer than the perimeter of the armhole.

Fold the strip and product with the front side inside. Marking. We do not pull the knitted stripes, we have freely, in the rounding area you can even slightly disfigure.

We lay a line at a distance of 5 mm. From the edge. We use, of course, a needle for knitwear. They are usually with a blue flask. The line should not stretch the edge of the fabric. If your machine stretches the fabric, try to loosen the press of the pawing.

Smooth the seam. Allowing the allowances to the side of the box.

We remove from the side of the box, retreating from the seaming seam 1-1.5 mm., t.E. Very close to the seam, but without getting out for it.

Cut the allowances into seams close to the line.

We turn the box to the wrong side and iron.

Pay attention. There should be a small overgrowth (literally 1 mm.) the main fabric on the wrong side.

We bend the free edge and mark. The width of the box in the finished form should be 7 mm. During the staggering, we measure this width throughout the armhole.

After that, the armhole should be laid out on the ironing board, preserving the rounded shape and steam well with an iron.

We pull out close to the bend, retreating 1-1.2 mm.

After the second armhole has been processed, the product is folded along the axis of symmetry, the shoulder seams are combined and the armhole is checked, if necessary, equalized.

As a result, we get a beautifully processed clean edge.

Next, combine the edges of the armhole and grind the side seams. I have an overlologue, and I got it, but you can flash on a sewing machine.

Bend the allowances on the shelf and fix it with fixing.

Released handling of a knitted dress.

Direct line with bending

A very simple but reliable way that looks like the previous. To perform a line with the bend, it is necessary to make the following:

• We open the workpiece on the seam.
• We have the edges of the sections on different sides of the seam.
• Now you need to bent each edge inside and iron.
• We lay a line at a distance of 1 mm from each edge.

Such a seam can be made without hem. In this case, you save time, but the protection of the edge from the crowning will be worse.