What dishes are needed for glass ceramic stove

Which dishes to choose and use for glass.Ceramic hob

The improvement of technical fillings of various devices quite often makes certain adjustments to the operational process. For example, for glass.Ceramic plates, special dishes should be used, which ideally fully corresponds to the hobs according to certain characteristics. This feature makes many housewives refuse to use old pans, pots, choosing a limited amount of utensils for the kitchen for cooking.

Hobs are presented in the assortment. Clients can choose models:

  • Dependent. Installed in oven cabinets, are located on top of this equipment. As a rule, control elements are placed on the front panel at the top of the oven body. Thus, the surface will not work separately from the oven;
  • Independent are autonomous devices of modern kitchen equipment. The control system is placed on the case panel created for this purpose. Such models do not join large oven. Most often they have compact sizes. Suitable for use in small kitchens.
dishes, needed, glass, ceramic, stove

Installation of an electric dependent slab. Outpatient barrel panel

However, the latter are also not deprived of their advantages. They can stylishly and organically fit into the kitchen set, so the effect of integrity is created in the room, which is so pleasant to lovers of aesthetic perfection. In addition, practice shows that working on such a surface is much more convenient than on an independent analogue.

The independent surface organically fits into the design

For dependent panels, it is important to highlight the shortcomings. If the oven or slab breaks, you can not operate all the equipment. Over, its price, for known reasons, is quite high.

Features of heating dishes

Models with the Hi Light option are available on the household equipment market. During heating, in this case, a special serpentine tape takes part, which is made from alloys of various metals. Such a device of devices and determined the need to use special dishes for cooking. If we compare the principle of the functioning of these plates with standard models, in this case the advantage refers to cast.Iron analogues, where the thermal transmitter option is performed by a component that can heat up as quickly as possible. These plates are combined with slow cooling. We are talking about residual warmth.

The principle of operation of glass.Ceramic slab

Features of plates with glass.Ceramic surface

Hobs of this type are made of glass according to a special method, so that they have excellent strength, resistance to high temperatures and are characterized by durability. They are distinguished by a flat coating that is easily cleaned of pollution.

There are two main types of devices: with a conventional heating device (TEN), from which heat spreads to the burner, and with a special coil, which heats only the bottom of the dishes. Induction plates.

  • The burners work with high efficiency, they are heated and cooling much faster than on standard slabs. The temperature grows only in the area of ​​the heating element, which eliminates the risk of burns.
  • Heat flows in the vertical direction, due to this the bottom of the dishes is immediately warmed up, and excess time is not spent on cooking (for example, the liquid boils in a few minutes).
  • Low energy consumption and low power will relieve additional energy costs.
  • A variety of built.In functions allow you to cook food for every taste.

Dishes that cannot be used on glass.Ceramic surface

Copper and aluminum cannot categorically be used, spots remain on such a plate that are very difficult to remove.

Glass ceramic dishes. Unsuccessful option. Heat.Resistant, glass. You can’t use it either. These three types of dishes do not warm up as quickly as necessary and, in the end, the stove pulls too much electricity. But here, in fairness, it should be noted that glass.Ceramic dishes are not suitable for other hobs, it can only be used in the oven.

About the frying pan and about Kazakh women with a round bottom, you can immediately forget. If the surface is small, then the dish will not even be able to get out as it should. It is necessary, exclusively, a dense coating with the bottom of the dishes of the entire hob.

In no case should you use dishes with a deformed bottom. And heating will be disgusting and the surface is scratched.

On this, perhaps. Everything. You cannot use the above, and no matter how you love old pots, many will have to refuse. But what remains?

How to choose the right glasses for glass.Ceramic stove

In order to use all the advantages of modern plates, it is necessary to choose the corresponding inventory that will save electricity and do not harm the technique. Dishes for the glass.Ceramic hob should be a whole, clean and with an even bottom.

Today, manufacturers have simplified the selection of kitchen accessories. All dishes have designations that indicate the permissible type of surface for cooking. The icons are applied to the box with kitchen utensils and to the bottom of the products. When buying, you can consult with specialists.

Old dishes are most likely not suitable for glass ceramics.

Especially if it was affected by fire, which gradually deforms steel. Even if the bottom looks even, you still should not risk new technology.

When choosing a suitable pan or pan, you need to pay attention to the bottom. It should be flat, even, exclude drawings and any other irregularities.

If the surface is glass-ceramic, the dishes should have a multi-layer, capsulated bottom, which consists of 3-7 plates. This design provides uniform distribution of heat, which affects the quality and taste of food.

The bottom is selected dark and matte so that it reflects the heat as much as possible. It is necessary to pay attention to its thickness in order to avoid possible deformation.

Wall thickness

The thickness of the walls does not matter much. The sidewalls do not contact with the hob, so heat does not affect them. Basically, the thickness of the walls depends on the manufacturer, the utensils and the needs of the family itself.

Material

Dishes for glass.Ceramic stove can be made of various material. Great option. Stainless steel. Products are comfortable in the kitchen and have a stylish laconic look.

Glass is compatible with such a hob. But when choosing dishes from this material, it must be borne in mind that it has poor thermal conductivity. The liquid heats up longer and the time for cooking is needed more. This affects the amount of electricity spent.

You can use ceramic dishes, which has a flat, even bottom, without chips and sides. Fans of colorful options for kitchen inventory should take a closer look at enameled products.

Dishes for the induction hobs should be made of ferromagnetic alloys, so you need to check the bottom of the containers. When buying, you can determine compliance with an ordinary magnet.

What dishes are suitable for ordinary glass ceramics

Glass.Ceramic panels of this type are most common, and the possibilities of choosing dishes suitable for them are wide enough. On such a stove, it is recommended to use:

  • Enameled pots with an even bottom without chips and scratches;
  • Glass with heat.Resistant properties;
  • Stainless steel;
  • Aluminum dishes covering the bottom of the Teflon or Ceramics.

It should be noted that when choosing utensils, it is better to consider the properties of materials: for example, glass dishes have low thermal conductivity.

The efficiency of useful action when cooking will not be too high, and the electricity consumption will increase. However, this fact cannot be considered a direct contraindication for the use of glass dishes.

Of the features of objects for glass ceramics, it is also worth mentioning the thickness of the bottom. The larger it is, the more uniform the food will be heated. In addition, the thick bottom protects the panel itself from excessive overheating.

Color also matters: dark and matte bottom absorbs heat better than light and shiny.

As for the diameter of this part of the pan or pan, it is desirable if it exactly corresponds to the diameter of the burner: this will reduce heat loss and force the panel to work with maximum efficiency.

What are the requirements for the material of the dishes

For ordinary plates models, it is recommended to use dishes from durable metals. Soft metal products, such as copper and brass, are categorically not suitable for operation on the stove, which heats up entirely. Because it is impossible to eliminate traces of melting and subsequently this will affect the further productivity of the device.

As for induction models, they independently determine the right kitchen utensils. Some modern models are simply not included when unsuitable dishes on their surface. These include: glass, aluminum, brass items.

dishes, needed, glass, ceramic, stove

How to Clean Your Glass Stovetop! Kitchen Cleaning Ideas That Save You Time & Money (Clean My Space)

Dishes for electric stoves

For a regular glass.Ceramic slab, it is easier to choose dishes than for induction. But which material is better?

The most suitable type of material for glass.Ceramic electric stoves. It is durable, resistant to aggressive chemicals (alkalis, acids), warms up evenly, does not deform due to high temperatures. Easily laundered from fat and food residues using a conventional soap solution.

It is desirable that the bottom has a marking 18/10 (18%. Chrome, 10%. Nickel). Stainless steel with such a composition is more solid and wear.Resistant.

It is advisable to buy cast iron with a protective coating or at least special heat treatment. Otherwise, the bottom will quickly attract particles of food and fat to itself, become a rough. You can use cast.Iron dishes, but it needs careful care.

Allowed as walls of the walls. It is also allowed to use aluminum pots if their bottom is thick or has a ceramic, Teflon coating.

It is undesirable to cook food on a glass.Ceramic hob. Typically, enameled pots have a thin bottom, subject to deformation, and the coating is quickly covered with scratches.

The glass container looks aesthetically pleasing and suitable for use on ceramic slabs. However, food is prepared for a long time due to low thermal conductivity of the material. It is better to use glass dishes in the oven or microwave oven.

Pay attention to manufacturer markings. If the product stands a note “for electric stoves”, this does not mean that dishes are suitable for use on a glass.Ceramic hob.

What are the features of heating dishes for glass.Ceramic hobs

A distinctive feature of such hobs is the rapid heating of fireplace, which give thermal energy vertically only to the bottom of the dishes. A quick cooling of the surface will protect your family and especially young children from burns. If an induction heating element is installed on the plate, it does not heat the surface of the hob, but interacts only with the dishes. This is the most safe plate in the market of household appliances.

Modern manufacturers began to produce aluminum products with a specialized magnetic bottom, which allows you to fully operate dishes on such panels.

What dishes can be used

This solution will depend on the type and type of plate installed in your kitchen decoration. If an induction type is purchased, equipped with glass.Ceramic coating, then the operation of strictly special dishes with a magnetic bottom is necessary. That is, the utensils should be made mainly from steel stainless steel or cast.Iron element. As for the walls, they can be made of other material, and often aluminum, non.Magnetic steel and glass of increased thermal stability are used for this. Otherwise, some models will not even be able to turn on, many are equipped with a sensor, which determines the degree of “correctness” of the utensils.

When choosing dishes, pay attention to whether it stretches to the magnet: if not, the stove will not work. The exception is aluminum, copper, as well as non.Metallic dishes from ceramics and glass

On glass.Ceramic stove, it is recommended to use a completely new dishes

Such patterns have a connection with the principle of operation of induction devices in which heating is carried out not in connection with contact with the heated stove, but by creating induction current currents at the bottom. If we are talking about the traditional tile of glass ceramic, which has various variations of heating elements, any type of dishes equipped with an even bottom is suitable. Over, the greater smoothness it will have, the greater the density of contact will be ensured (enameled and steel products are perfect). It is sometimes advisable to use glass, but electricity in this case will be spent faster.

How to Clean Burnt Stove Top. Glass or Ceramic. THIS REALLY WORKS!

The principle of operation of glass.Ceramic slab

About the author

| Denial of responsibility | Contacts |RSS