What water does a dishwasher connect

Installation and connection of the dishwasher: installation and connection of the dishwasher to the water supply and sewage

The correct work of the dishwasher depends not only on the quality of spare parts and assembly. The uninterrupted functioning and normal execution by the aggregate of the main tasks is influenced by the correct connection of the dishwasher to communications. Want to do this work yourself, but doubt that everything will work out?

We will help you in the implementation of the plan. The article describes in detail the stages of installing equipment, connecting a socket, water supply and the arrangement of a drain system. In order not to encounter an accident, leak or quick repair, you need to adhere to the recommendations of the manufacturer indicated in the instructions.

Is it possible to connect a dishwasher to hot water?

Relatively recently, dishes appeared in the houses of our compatriots. This device is appreciated not only by women, but also by men, because there is a lot of free time.

But even today, many have many questions on different topics regarding dishwashers. The common questions about the method of loading dishes include. Information is also extremely necessary about the proper installation of the device to the water supply system. Many people think that it is better to connect a dishwasher to hot water directly. After all, the tariff for electricity is increasing almost daily, and after all, hot water is constantly in the tap. Why use electricity for heating water for a dishwasher?

Many experts are ambiguously answering the question: “Is it possible to quickly and reliably connect a dishwasher to hot water?””. After all, not all manufacturers can give clear recommendations on this subject.

Installation process

Installation of PMM involves its connection to sewage, water supply and power supply. And in this case, the correct sequence of actions is of great importance. If this requirement is ignored, the procedure will take more time and, perhaps, you even have to redo everything. How to act? We offer you step.By.Step instructions below.

Step one: bring to the pipe point

The connection procedure to the sewage system is not complicated. But you need to consider several nuances:

    A siphon for draining water should have a side fitting to connect a drain hose. If it is not, you have to put a suitable siphon.

Make sure that the hose itself does not get rid of anywhere and does not twist. Otherwise, problems with water drainage cannot be avoided.

If these points are made, just set the end of the drain hose into the fitting on the siphon. For reliability, it is better to fix the connection place with a clamp, so that with strong pressure the hose does not break.

Step two: connect to water supply

You can connect the technique both to the cold water supply system and hot. But for our realities it is better to refuse the second option. Often, hot water contains more mechanical impurities than in the cold. Therefore, there is a risk that the car will quickly give a failure without having worked half of its warranty period.

To connect the device to water supply, act like this:

  • Cross the water supply and drain the water from the pipes.
  • On a cold water supply, disconnect the flexible eyeliner and remove the old waterproofing.
  • In its place, set the passing crane-trinket.

Wind up a fumka in 10-15 layers around the connection. If the tape is lost, rewind it in the opposite direction.

Step Three: We connect to the power supply network

Any dishwasher to the power supply is connected through a regular outlet with a voltage of 220 W. But it is important that the place of its location relative to the connected device is as follows:

  • Be close to technology, since an extension cord for supplying to it cannot be used categorically.
  • Placed on the right or left of the device, but not behind it.

It is also impossible to connect a PMM and other household appliances to one socket.

If all the rules and recommendations for the connection are observed, it remains to launch the dishwasher in test mode to verify the performance of the entire system.

TOP-7 compact dishwashers Midea

MCFD42900 G Mini

Mini dishwasher, created for a small kitchen, without the need to connect to the water supply. It is good for washing children’s dishes and bottles, as well as for use in an office or a small family of 2 people.

The device performs its work well, eliminating all pollution and extraneous smells from the cutlery.

  • Type. Compact;
  • Placement. Separately standing;
  • Equipment. 2 sets of dishes;
  • Energy consumption. Class A;
  • Drying. Class A;
  • Regulation. Electronic;
  • The number of modes is 6;
  • The number of temperatures is 4;
  • Type of drying. Turbo;
  • Dimensions. 424444.

Specifications:

  • Water consumption. 5 l;
  • Power. 730 W;
  • Energy consumption for one wash. 0.43 kWh;
  • The standard washing time is 160 minutes;
  • Noise. 58 dB.

MCFD-0606

A stylish vessel of a snow.White color of small sizes will fit even into the smallest kitchen.

Basket for devices can accommodate 6 sets of dishes. The device is equipped with complete protection against leaks (Aquastop system).

  • Type. Compact;
  • Placement. Separately standing;
  • Equipment. 6 sets of dishes;
  • Energy consumption. Class A;
  • Drying. Class A;
  • Regulation. Electronic;
  • The number of modes is 6;
  • The number of temperatures is 6;
  • Drying type. Condensation;
  • Dimensions. 555043.8;
  • Weight. 22 kg.
See also  How to turn on hot water on a navien boiler

Specifications:

  • Water consumption. 7 l;
  • Power. 1380 watts;
  • Energy consumption for one wash. 0, 61 kWh;
  • The standard washing time is 120 minutes;
  • Noise. 49 dB.

MCFD-55200S

A compact dishwasher that can accommodate even in a kitchen of 10 square meters.M. Easily connected independently, control intuitively understandable to everyone.

Despite the small size, the machine is roomy inside and can wash up to 6 sets of dishes.

water, does, dishwasher, connect
  • Type. Compact;
  • Placement. Separately standing;
  • Equipment. 6 sets of dishes;
  • Energy consumption. Class A;
  • Drying. Class A;
  • Regulation. Electronic;
  • The number of modes is 6;
  • Drying type. Condensation;
  • Dimensions. 555043.8.

Specifications:

MCFD-55320W

The dishwasher of compact sizes has a display with a timer showing the end of the sink.

Despite the relatively inexpensive price, the device is laundering even chopped fat from pans and pots. Thanks to small dimensions, the machine can be installed even under the sink. Ideal for a summer residence, office and a small family.

  • Type. Compact;
  • For placement. Separately standing;
  • Equipment. 6 sets of dishes;
  • Energy consumption. Class A;
  • Drying. Class A;
  • Regulation. Electronic;
  • The number of modes is 6;
  • The number of temperatures is 4;
  • Drying type. Condensation;
  • Dimensions. 555043.8;
  • Weight. 22 kg.

Specifications:

  • Water consumption. 9.5 l;
  • Power. 1380 watts;
  • Energy consumption for one wash. 0.61 kWh;
  • The standard washing time is 120 minutes;
  • Noise. 49 dB.

MCFD-55200W

Convenient compact device with simple control. It has a delayed sink in the arsenal up to 24 hours, cleaning glass and express muscle for poorly chopped utensils. The perfect solution for a family of 3 people.

Read the same: TOP-5 MIELE dishwashers. 2019-2020 rating, technical characteristics, pros and cons, customer reviews and recommendations for choice

  • Type. Compact;
  • Placement. Separately standing;
  • Equipment. 6 sets of dishes;
  • Energy consumption. Class A;
  • Drying. Class A;
  • Regulation. Electronic;
  • The number of modes is 6;
  • The number of temperatures is 6;
  • Drying type. Condensation;
  • Dimensions.555044;
  • Weight. 22 kg.

Specifications:

  • Water consumption. 6.5 l;
  • Power. 1380 watts;
  • Energy cost for one wash. 0.77 kWh;
  • The standard washing time is 180 minutes;
  • Noise. 49 dB.
  • Lack of washing cycle on the display;
  • Sometimes there are traces of food on the dishes;
  • You can not put tall glasses and cups to wash.

MCFD-55500W

This model has several convenient sink modes, including delicate, express cleaning, fruit washing without soap and self-cleaning. The car is almost silent, it can be used even at night. There is an option of a rinseum and salt.

  • Type. Compact;
  • Placement. Separately standing;
  • Equipment. 6 sets of dishes;
  • Energy consumption. Class A;
  • Drying. Class A;
  • Regulation. Electronic;
  • The number of modes is 8;
  • Drying type. Condensation;
  • Dimensions. 555043.8.

Specifications:

  • Perfectly launders dishes;
  • Almost silent;
  • The volume of the basket is optimal;
  • There is an additional sink program (15 minutes to the main);
  • A family of 3 people is loaded once a day.

MCFD42900 or mini

A separate compact car for washing dishes without the need to connect to the water supply.

Original orange color, the small size will make the kitchen light and multifunctional. Express sole in 29 minutes will wash the dishes until perfect cleanliness. Well suited for children’s bottles, there is a ferry processing function.

  • Type. Compact;
  • Placement. Separately standing;
  • Equipment. 2 sets of dishes;
  • Energy consumption. Class A;
  • Drying. Class A;
  • Regulation. Electronic;
  • The number of modes is 6;
  • The number of temperatures is 4;
  • Type of drying. Turbo;
  • Dimensions. 424444.
water, does, dishwasher, connect

Features of connection to hot water supply

The leadership of the dishwasher indicates the connection tips, the kit includes additional installation elements.

When connecting, take into account a number of features:

  • Use a pouring hose that allows you to work with hot water, ordinary. Will not withstand pressure and high temperature;
  • Install a brass tap tap to connect the machine to the water supply system;
  • Fix an additional flow filter for purification from impurities.

Important! Hoses differ in color for the convenience of installation.

Detergent packs are kinda wishy-washy (Dishwashers Explained)

In the course of work adhere to the recommendations of the manufacturer. Step-by-step instruction:

  • Block the boiling water.
  • Eliminate the plug from the pipe hole.
  • On the thread at the end of the pipe to wind the fum tape.
  • Install a tapeumin. One of its edge is covered with a plug, the other is fixed with a fum tape.
  • Check the length of the hose (whether the car is taken on do). Screw it to the free edge of the crane.
  • Attach the filter.
  • Flow to the dishwasher.

After the end of the work, the correct installation and tightness of the joints are checked.

Important! FUM tape. Insulating tape for sealing connecting elements.

Several general recommendations for installing dishwashers

It must be assumed that if the owners still decided to buy a dishwasher, then they have already thought out the place of its installation. In general terms, it depends on which model more to taste. Compact desktop or built.In in kitchen furniture. Accordingly, there may be serious differences in installing and connecting the device to communications.

Built.In and desktop dishwashers

And in that and in another case, the installation location of the machine is trying to bring closer to the kitchen sink as much as possible as possible. This is explained simply. It becomes possible to connect the device to engineering communications, without resorting to a difficult procedure for inserting into the pipes. There will be enough compounds and nodes that provide water supply to the mixer and remove it from the sink to the sewer. Lengthening the standard hoses of the dishwasher, especially drainage, is not welcome, since the capabilities of the pumping pump are limited, and it is not worth overloading it so as not to cause quick wear.

However, such a placement is not at all a dogma. You can arrange a dishwasher and in a more convenient place, from the point of view of the hosts, but so that in the radius of the length of the standard hoses there is the possibility of inserting into the corresponding pipes of the water supply and sewage (this example will also be considered in the publication), or you will have to think over the laying of an additional section of such pipes specifically for the purpose of connecting the device.

See also  Gas water heater goes out when you turn on the shower

Of course, a fishing line should be brought to the future installation site of the dishwasher for a power trimmer for the corresponding section, and a separate outlet is installed, it is mandatory with the grounding contour. The use of extension cords should be completely excluded. Water, increased humidity and electricity. And so a rather dangerous “neighborhood” is already a rather dangerous, so no connivance like: “Petit is so connected. And it’s okay”. Absolutely unacceptable.

The power supply of the kitchen is a matter of increased importance!

Connecting Water to Your Dishwasher | Whirlpool Appliance Repair Self Help Videos

The distinctive features of any kitchen are not only a high level of humidity and the constant use of water, but, perhaps, the largest power consumption of the electrical appliances installed in it. Refrigerator, microwave, washing and dishwasher, hood, electric stove and oven, and this is not counting lighting and small household appliances! How to properly organize the power supply of the kitchen is described in detail in the article of our portal dedicated to the installation of electrical wiring in the apartment

The place for installation should be prepared. There is an appropriate niche for inserting the desired size or free space on the tabletop for a desktop installation. The base should ensure a reliable position of the device, in a strictly horizontal position, based on all racks in order to avoid a backlash or increased vibration. Each model of the dishwasher has its own requirements for the preparation of the place, the technical documentation contains a description of the installation, the kit usually includes all the necessary fasteners.

An example of a scheme-instruction on the installation of a built-in type dishwasher

There is another nuance of preparation for the installation of a machine. It should be taken into account in advance. Many models on the back of the case have outputs of the power cable and hoses shifted in one of the sides. The same, the permissible distance to the connection points can be different on the left and to the right of the dishwasher. Typically, this feature is also indicated by the manufacturer in the technical documentation.

The permissible distance to the connection points on the left and on the right may vary

Before taking up the independent installation of the dishwasher, the owner must very carefully evaluate his capabilities and skills. If there are any doubts about their own abilities, it is better to invite an experienced master-technology that has positive recommendations (a considerable number of frank “shabashniks” are working in this field). The fact is that violation of the rules of installation may well lead to the termination of the warranty obligations of the manufacturer. Often in large stores-stores, a proprietary installation is practiced at a low price, and sometimes even free-as one of the ways of stimulating customer activity. This question should immediately be clarified when buying.

In the case when such a service is not provided, and the call of the master is seen by significant extra costs, then nothing is impossible in the independent installation. And if you “take out the brackets” the already mentioned fishing line for the power of power supply and the features of the installation of the device in the niche, then the main stage of the process is the correct connection of the dishwasher to the water supply and sewage.

Do you need hot water to connect PMM

Depending on the brand of your dishwasher, the instructions indicate degrees for the correct connection. Whether technique works without hot water? For example, for Bosch models, no more than 20 degrees are provided. This means that connecting to a hot water supply is impossible. Otherwise you may be deprived of a guarantee.

You think that thanks to the use of high temperature water, you can save? After all, then the heater will not work, this will reduce electricity accounts. Why manufacturers recommend using cold water supply?

  • The permissible rate of water heating for the dishwasher is 60 degrees. Using source with high temperature will lead to a breakdown of filtering systems.
  • Garbage comes with hot water than with cold. You need to install an additional cleaning filter.
  • Hoses quickly spoil, gaskets wear out. When exposed to high temperatures, the hoses and nozzles can bend, the joints are weakened.
  • The quality of the dishwashing is reduced. Preliminary rinse from food residues is always done with cold water. Otherwise, pieces and particles of products stick to plates.

Remember! The dishwasher can heat water, but cool. Not.

Keep in mind that hot water has a higher pressure than the cold. With a conventional mixer, a high pressure stream will go through a low stream pipe. Therefore, you will have to install a special mixer that will block one channel.

Squeling from the dishwasher to the sewer

First you need to inspect the drain from the sink. A siphon is attached from below to the opening of the sink, through which the liquid flows into the sewer pipe. This is the most convenient place for the organization of drain from PMM. Also on the drainage highway itself arrange a backup receiving pipe for connecting plumbing. Both options are suitable for arranging the connection point of the drain from the washing machine.

It may turn out that a sewage site without discharge will be an accessible place for joining. Then the alteration will be needed:

  • Find a joint on a trunk, make a connector with a removal of one element.
  • Insert the tee into the formed gap and get the length with an additional insert.
  • Steping new joints.
See also  The belt on an indesit washing machine is coming undone

Instructions for connecting to the water supply

As a rule, flexible hoses from pipes with hot and cold water go to the cranes located in the sink. That is why the most convenient way to connect the PMM is located in the place where such a hose is connected to the water line. Otherwise, you will have to make an insert into the pipe using a tee or a collector with two dishes and taps. When connecting a flexible hose with a water supply, a tee with a shut.Off tap must be connected to a sink.

Connecting the tee at the junction of a flexible hose with a tap highway withdrawn from the wall

The shut.Off crane in the tee is necessary so that you can quickly stop the water supply in the event of an emergency. Since most PMM models need only cold water, one tee will be required.

For work, the following tools and materials should be prepared:

  • A tee with a built.In crane made of brass or bronze, with a 3/4.Inch thread diameter (this diameter is suitable in most cases);
  • Input filter of rough cleaning (if this is not included in the kit of the dishwasher);
  • Fluoroplastic sealing ribbon (FUM-tape);
  • Divorce keys;
  • Sharp knife.
water, does, dishwasher, connect

The divider for 2 outputs with a 3/4.Inch thread diameter

If there is already a washing machine in the kitchen or it is planned to install it, the tee should be replaced by the collector with two outputs with the same diameter (3/4 inches) and two locking cranes (see. Photo above). In addition, some PMM models are equipped with too short fill hoses, a little more than a meter long. If this length is not enough, you will have to buy a new hose in a specialized store.

PMM flood hose along with an mounted Aquastop system

To correctly connect the dishwasher with your own hands to the water supply, the work should be done step by step, in several stages:

  • Crush water supply to the apartment.
  • Disconnect a flexible hose, leading cold water to the mixer, from the water supply pipe.
  • Connect the water pipe with the input hole of the tee or branch, wiping the fum tone previously on the thread.
  • Combine the outlet of the tee or collector with a flexible hose going to the mixer. Do not forget to use the FUM tone.
  • Connect the filter and the intake hose of the dishwasher to one of the lateral taps.
  • If there is a washing machine, connect its inlet hose to the second branch of the branch.
  • Check the tightness of all compounds, supplied water to the highway.

This is where the connection of the dishwasher to the water is completed.

It happens that when installing a dishwasher, you have to redo the mount and communications supply

Sometimes the situation does not allow the installation of PMM near the sink. In this case, you have to crash into a water pipe. If it is made of metal.Plastic, there will be no difficulties. It is necessary to cut a piece of the pipe and install a tee or collector with press-fitings in its place that provide a reliable connection.

CANGE CONNECTION OF POLOPRES made of metalloplasty using compensation press fitting

You can not cut a metal pipe. Just put on a clamp on top with a removal and drill a hole in the pipe through a removal. This compound is also reliable.

Trinuts for metal pipes with attached locking taps

How to connect PMM with your own hands

Think immediately what tools and details you might need. Prepare everything, and then get to work.

  • Tee with a thread diameter ¾ inch. It is better to choose a brass or bronze tee with a locking crane. These materials are more durable and reliable than plastic and brass.
  • Castle filter. He will stop large particles of garbage at the entrance, protect the pouring hose and a filter from a blockage.
  • Squeezing clutch for inserting into the pipeline.
  • FUM-toe.
  • Additional hose, adapter.

If you are not suitable for an ordinary hose that came with the machine, you can buy another with Aquastop protection. He looks like this:

Inside the plastic case is the absorbent sponge. After the leak, the sponge absorbs moisture and swells, blocking the water current into the system. What is the defense “Aquastop”, read in our article.

If you have a built.In dishwasher, you can first install it in place, and then organize water eyeliner. There are two connection options:

One end of the hose is planted on the output of the dishwasher, the nut is twisted. The other end is attached to the output of water under the sink. Consider both options.

  • Cross the intake valve.
  • Unscrew the mixer hose from the pipe.
  • In its place, set a tee with a crane.
  • Connect the mixer hose to one exit, and to the other. The flow filter and the PMM hose.
  • Rewind the threaded connections with a fum tone. Seal on thread 10-15 times.

If the pipe passes near the technique, it makes no sense to stretch the hose to the sink. You can put it into the pipe yourself.

  • Close the input hose.
  • Cut part of the pipe with corner grinders and install the squeezer coupling.
  • Screw the tap with a ball mechanism to the clutch.
  • Wrap the end of the dishwasher hose to the crane exit. For additional devices, it is better to install the tee.

Judging by user reviews, an easier way is to connect through the mixer.

As you can see, you can perform installation yourself if you want. Pre.Read the instructions for your PMM, and also watch the video:

About the author

| Denial of responsibility | Contacts |RSS